D-Link DI-713P User manual
1
Quick Install Guide
DI-713P
Wireless Broadband Router with Print Server
1
Connecting the DI-713P Wireless Router to
2
your network
When you have completed the steps in this installation guide, your
connected network may look similar to this:
First,
Plug in the power supply as shown.
The Power LED will turn on
to indicate proper operation.
1
2
1
2
Connecting the DI-713P Wireless Router
to your network continued
Next, connect the WAN port to the
Cable/DSL modem. The WAN LED
will indicate connection.
Finally, connect computers with ethernet
adapters to one of the LAN
ports on the DI-713P.
Installing the DI-713P
Checking the IP Address of the computer being
used to configure the DI-713P Wireless Router
Go to Start>Run
Type in “WINIPCFG” .
The IP address of the computer
must
be between 192.168.0.2 and
192.168.0.254 in order to configure
the router.
Note: If you are manually
assigning
a static IP, please refer to
Appendix A.
Click on the “Release All” and then
on the “Renew All” button to
obtain an IP address from the broadband
router between 192.168.0.100.
and 192.168.0.199.
3
Installing the DI-713P
Open the web browser, and type
192.168.0.1 into the URL address box.
Note: Please disable any proxy server
setting for the web browser.
When the login screen appears, type
“admin” in the “System Password”
field.
Click “Login.”
In the following “Device
Information” screen, select “Setup.”
The default IP address of the LAN port
is set to 192.168.0.1
By default, the WAN port is set to
automatically obtain an IP address
from the ISP.
4
Installing the DI-713P
Cable modem users:
If you are using a cable
modem, enter the “Host
name” given by your cable
provider.
Click on “Save” and “Reboot”
to save changes.
DSL users:
From the setup screen, click on
the “Change” button.
At this screen, select “PPP
over Ethernet.”
Click on “Save.”
Enter the “PPPoE account”
and “PPPoE password.”
Click “Save” and “Reboot” to
save changes.
5
3
The DI-713P default wireless
settings will work out of the
box with any other D-Link
products.
The factory settings are:
channel: 6
network ssid: “default”
To enable WEP encryption,
select
the encryption type. (Enable
either the 64 or the 128 bit
encryption.)
Then enter the encryption key,
as
shown.
Note: Each key must consist
of 5
pairs of hex digits, which
means
that only digits 0-9 and letters AF
are valid.
Click Save and Restart the computer
to save changes.
Checking the connection
to the Internet
To check the connection, open the
web browser and go to your
favorite website.
If you are unable to browse,
please do the following:
1. Refer to Appendix B to check
your connection to the wireless
router.
2. Use “Help” on the Main
Menu.
3. Refer to the troubleshooting
section in the user’s manual.
6
Install Print Server Installation (Optional)
NOTE: If you choose to use the print server function, plug the printer cable
from your printer into the printer port on the DI-713P..
Insert the Print Server
installation CD into
the
CD-ROM drive. The
following
screen will
appear. If the CD
does
not automatically run,
then click on
“install.exe” on the
CD.
Click on “Install Print
Server.”
At the Welcome screen,
Click Next
4
7
4Print Server Installation (Optional)
continued
To select the default
folder,
Click Next
Note: Please Click
Browse to select an
alternate folder.
When this window
is
displayed,
Click Finish
8
Installazione del print server (opzionale)
-continua
Selezionare “Yes, I want to
restart my computer”.
Cliccare su “OK”.
Dopo il riavvio del computer,
l’installazione del software è
completa.
Configurazione della stampante
Nota: Se la stampante non è installata, accedere a AVVIO> IMPOSTAZIONI>
STAMPANTI
Eseguire un doppio clic sull’icona “Add Printer”. Seguire il programma “Add
Printer Wizard.”
Su richiesta, selezionare la porta “DLink LPT Port (Print Server.)”
Per la configurazione della stampante, utilizzare il driver fornito dal produttore. Una
volta configurata la stampante, continuare con la procedura di configurazione
descritta, seguendo le istruzioni che corrispondono al sistema operativo utilizzato.
A) Configurazione della stampante in ambiente
WINDOWS 98
Per gli utenti Windows
98 la procedura di
configurazione è la
seguente:
Accedere a AVVIO>
IMPOSTAZIONI>
STAMPANTI
Cliccare col tasto destro del
mousesull’icona della stampante connessa al DI-713P.
4
5
9
Configuring your printer
continued
A) Configuring your printer in WINDOWS 98
continued
Select Properties.
Choose the Details tab.
At the “Add Port” menu,
choose “D-Link LPT port
(Print Server).”
Please make sure the proper
printer driver is selected.
Click “Port Settings”
Type in the IP address of the
DI-713P.
Click OK
In the previous window,
make
sure the settings are
correct.
Click OK
You have completed
configuring your printer
with Windows 98.
5
10
D-Link LPT Port (Print Server)
Configuring your printer continued
B) Configuring your printer in
WINDOWS NT
If you are using Windows NT, please follow these
instructions:
Go to START>
SETTINGS>
PRINTERS.
Right Click on the
printer icon that corresponds
with the printer
that you have connected
to the DI-713P.
Select Properties,
choose the Ports tab.
Make sure that the
D-Link port is highlighted
as shown.
Click Configure Port.
D-Link LPT Port
Enter IP address.
Click OK at both
screens.
You have completed configuring your printer in Windows NT.
5
5
Other manuals for DI-713P
3
Table of contents
Other D-Link Wireless Router manuals
D-Link
D-Link DIR-600 User manual
D-Link
D-Link DIR-859 User manual
D-Link
D-Link DIR-860L User manual
D-Link
D-Link DIR-868L Manual
D-Link
D-Link DIR-651 User manual
D-Link
D-Link AC750 User manual
D-Link
D-Link DIR-600 User manual
D-Link
D-Link DIR-600 User manual
D-Link
D-Link DIR-430 User manual
D-Link
D-Link myPocket DIR-457 User manual
D-Link
D-Link M30 User manual
D-Link
D-Link DIR-505 User manual
D-Link
D-Link DIR-612 User manual
D-Link
D-Link AirPlus DI-614+ User manual
D-Link
D-Link DSL-3590L User manual
D-Link
D-Link DSL-2740B User manual
D-Link
D-Link DWR-510 User manual
D-Link
D-Link DIR-826L User manual
D-Link
D-Link DIR-632 User manual
D-Link
D-Link DSL-2542B User manual
