D-Link Air Premier DAP-2695 User manual

AirPremier®

AC1750 DUAL BAND PoE ACCESS POINT

DAP-2695

Quick Installation Guide+

Краткое руководство по установке+

Guía de Instalación Rápida+

Guia de Instalação Rápida+

快速安裝指南+

Petunjuk Pemasangan Cepat+

クイックインストールガイド+

D-Link DAP-2695 Quick Install Guide

ENGLISH

Minimum System Requirements:

• CD-ROM Drive

• Computers with Windows®, Macintosh®, or Linux-based operating

systems

• Installed Ethernet adapter or wireless adapter

• Internet Explorer 7, Chrome, Firefox, or Safari 4 or higher

System Requirements

Package Contents

Note: Using a power supply with a different voltage than the one included with the DAP-2695 will

cause damage and void the warranty for this product. If any of the above items are missing, please

contact your reseller.

DAP-2695 802.11ac

Access Point

Power Adapter

Ethernet Cable

PoE Base Unit

CD-ROM

Console Cable Mounting Plate

D-Link DAP-2695 Quick Install Guide

ENGLISH

Hardware Overview

LEDs

5 GHz - When lit, the access point is operating at 5GHz.

This light will blink when there is wireless trafc.

2.4 GHz - When lit, the access point is operating at 2.4GHz. This light

will blink when there is wireless trafc.

LAN1/LAN2 - Solid light when the Ethernet port is connected to a

working port, such as a router or switch. The light will blink when there

is trafc through LAN port.

POWER - The light will blink during boot up. Once solid, the access

point is ready.

D-Link DAP-2695 Quick Install Guide

ENGLISH

Installing the Hardware

LAN Port (PoE)

Reset Button

Power Receptor

Console Port

5GHz Antenna Connectors*

* 1 x 5GHz and 2 x 2.4GHz antenna connectors are located on the bottom of the access point.

LAN Port

2.4GHz Antenna Connectors*

D-Link DAP-2695 Quick Install Guide

ENGLISH

To power the access point, you can use one of the following 3 methods:

Method 1 - Use if you have a PoE switch.

Method 2 - Use if you do not have a PoE switch and do

not have a power outlet near the location of the

access point.

Method 3 - Use if you do not have a PoE switch and have

a power outlet near the location of the access

point.

Method 1

1. Connect one end of your Ethernet cable into the LAN1 (PoE) port

on the DAP-2695.

2. Connect the other end into one port on a PoE switch.

D-Link DAP-2695 Quick Install Guide

ENGLISH

Method 2

1. Connect one end of an Ethernet cable into the Data In port on

the PoE base unit and the other end into one port on your switch,

router, or computer.

2. Connect one end of an Ethernet cable into the P+Data Out port on

the PoE base unit and the other end into the LAN1 (PoE) port on

the DAP-2695 access point.

3. Use the supplied power adapter. Connect the power adapter to the

Power In receptor on the PoE adapter.

4. Connect the other end of power adapter into a power outlet.

D-Link DAP-2695 Quick Install Guide

ENGLISH

Method 3

1. Connect one end of your Ethernet cable into the LAN1 (PoE) or

LAN2 port on the DAP-2695 and then connect the other end to a

switch, router, or computer.

2. Use the supplied power adapter. Connect the power adapter to the

Power receptor on the DAP-2695 access point.

3. Connect the other end of power adapter into a power outlet.

D-Link DAP-2695 Quick Install Guide

ENGLISH

Conguration

Note: It is recommended to congure your DAP-2695 before mounting.

The easiest way is to connect to the Access Point directly to a computer

using an Ethernet cable. Statically assign the IP address of your computer

to 192.168.0.2 with a subnet mask of 255.255.255.0.

Step 1: Open a web browser (e.g., Internet Explorer, Chrome, Firefox , or

Safari) and enter http://192.168.0.50.

Step 2: At the login screen, enter admin for the user name and leave the

password blanks. Click Login to continue.

Step 3: After the home page appears, go to Basic Settings > LAN to

change the IP settings of the DAP-2695. Go to Basic Settings > Wireless

to congure your wireless settings.

Note: Make sure you click on Conguration > Save and Activate to save

your settings.

D-Link DAP-2695 Quick Install Guide

ENGLISH

Step 1: Insert the provided wall anchors in the wall where the mounting

plate will be attached.

Mounting Plate Assembly

Step 2: Use the provided screws to secure the mounting plate on the wall.

Step 3: Attach the remaining screws securely to the back of the DAP-

2695.

D-Link DAP-2695 Quick Install Guide

ENGLISH

Step 4: Attach the DAP-2695 to the mounting plate.

Step 5: Slide the DAP-2695 down into the grooves on the mounting plate

to secure it to the plate.

Other manuals for Air Premier DAP-2695

Table of contents

Languages:

Other D-Link Wireless Access Point manuals

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... User manual

D-Link

D-Link DAP-2660 User manual

D-Link

D-Link AirPremier N DAP-2690 User manual

D-Link

D-Link DBA-X2830P User manual

D-Link

D-Link AirPremier DWL-2210AP User manual

D-Link

D-Link DWL-1000AP Installation instructions

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G User manual

D-Link

D-Link DAP-1533 User manual

D-Link

D-Link DAP-1155 User manual

D-Link

D-Link DAP-1360 User manual

D-Link

D-Link DAP-2660 User manual

D-Link

D-Link AirPremier N DAP-2360 User manual

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 User manual

D-Link

D-Link DWL-7100AP User manual

D-Link

D-Link Air Premier DAP-2695 User manual

D-Link

D-Link AirPremier N DAP-3690 User manual

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... User manual

D-Link

D-Link AirPremier N DAP-3525 User manual

D-Link

D-Link DWL-7620AP User manual

D-Link

D-Link AirPro DWL-5000AP User manual

D-Link

D-Link DWL-2200AP - AirPremier - Wireless Access... User manual

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... User manual

D-Link

D-Link DWL-X8630APE User manual

D-Link

D-Link DWL-8710AP User manual

Popular Wireless Access Point manuals by other brands

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide

EnGenius

EnGenius EAP350 user guide