D-Link DSL-2750E Manual
-1-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
Technical Support Setup Procedure
FAQ : Configuring PPPoE Connection with WPA Encryption
using the Setup Wizard
Release date : 27/05/2013
Model Support : DSL-2750E
H/W: T1
S/W:1.04
-2-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
Technical Support Setup Procedure
PPPoE Connection WPA
Setup Wizard
1: , , ,
Address IP Address DSL-2750E 192.168.1.1
Enter IP Address
2: (User Name)
(Password) “admin”
Log In
-3-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
3:
SETUP WIZARD INTERNET CONNECTION
WIZARD Setup Wizard
4: Wizard DSL-2750E
Next
1
2
3
-4-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
5: (Enabled) (Disable) Daylight
Saving Time Zone NTP (Network Time Protocol)
Manual Setup Time Next
-5-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
6:
1. Country :
2. ISP (Internet Service Provider) :
3. Protocol : PPPoE
4. Encapsulation Mode : LLC
5. VPI : VPI
6. VCI : VCI
7.
8. NEXT
-6-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
7:
1.Enable Your Wireless Network
2. SSID
3. WPA-PSK WPA2-PSK Security Level
4. PRE-SHARED KEY (8-63
5. Next
-7-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
8: admin
New Password
Skip
-8-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
9: Apply
-9-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
Technical Support Setup Procedure
Configuring Bridge Mode with WPA Encryption using the Setup Wizard
Step 1: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar, enter the LAN IP Address of the DSL-2750E. The default ip address is 192.168.1.1. Press ‘Enter’
key on your keyboard. Please enter the new ip address of the router if you have changed it.
Step 2: A login screen will appear, type in the User Name and Password as “admin” all in lower case
(This is the default setting, please enter the new username and password if you have changed it).
Click on the Log In button.
-10-
FAQ: Configuring PPPoE Connection with WPA Encryption using the Setup Wizard –Version 1.00
Step 3: You are now at the DSL-2750E web interface. Click on the SETUP tab, select Wizard on the
left. Under INTERNET CONNECTION WIZARD, click on the Setup Wizard button.
Step 4: This wizard will guide you through a step-by-step process to configure your DSL-2750E to
connect to the Internet. Click on Next button.
1
2
3
Other manuals for DSL-2750E
12
Other D-Link Network Router manuals
D-Link
D-Link DSL-524T User manual
D-Link
D-Link xStack DGS-3426 User manual
D-Link
D-Link DES-1016D - Switch User manual
D-Link
D-Link DES-2218 User manual
D-Link
D-Link DSR-150 User manual
D-Link
D-Link xStack DGS-3600 Series Manual
D-Link
D-Link DMS-1100-10TS User manual
D-Link
D-Link DSL-2870B User manual
D-Link
D-Link Express Ethernetwork DI-707P User manual
D-Link
D-Link DIR-809 User manual
D-Link
D-Link GO-DSL-N150 User manual
D-Link
D-Link DSL-2880AL User manual
D-Link
D-Link COVR-X1862 Installation instructions
D-Link
D-Link DIR-457U User manual
D-Link
D-Link DIR-651 User manual
D-Link
D-Link AirPlusXtremeG DI-624 Operating instructions
D-Link
D-Link DI-304 User manual
D-Link
D-Link DIR-636L User manual
D-Link
D-Link Express EtherNetwork DI-604 User manual
D-Link
D-Link DIR-875 User manual
