D-Link DIR-825/ACF User manual

Quick Installation Guide

DIR-825/ACF

Wireless AC1200 Dual Band Gigabit Router wit

Fiber WAN Port, 3G/LTE Support and USB Port

DIR-825/ACF Quick Installation Guide

BEFORE YOU BEGI

Delivery Package

•Router DIR-825/ACF

•Power adapter DC 12V/1.5A

•Ethernet cable CAT 5E)

•“Quick Installation Guide” brochure).

If any of the items are missing, please contact your reseller.

The “User Manual” and “Quick Installation Guide” documents are available

on D-Link website see www.dlink.ru).

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

DIR-825/ACF Quick Installation Guide

Default Settings

IP address of wireless router 192.168.0.1

Username (login) admin

Password admin

ame of wireless network (SSID)

2.4GHz DIR-825ACF

5GHz DIR-825ACF-5G

etwork key (PSK)

see WPS PIN on the

barcode label on the

bottom panel of the

device

For security reasons, DIR-825/ACF with default settings cannot

connect to the Internet. To get started, please set your own password

used to access the web-based interface and, if needed, configure other

settings recommended by your ISP.

DIR-825/ACF Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router:

◦Apple Safari 5 and later

◦Google Chrome 10 and later

◦Microsoft Internet Explorer 9 and later

◦Microsoft Edge 20.10240 and later

◦Mozilla Firefox 10 and later

◦Opera 10 and later.

•A NIC Ethernet or Wi-Fi adapter) to connect to the router.

•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wireless network.

•SFP transceiver to connect to a fiber optic line.

•A USB modem when it is necessary to connect to the Internet via mobile

operators' networks)1.

Your USB modem should be equipped with an active identification

card SIM or R-UIM) of your operator.

Some operators require subscribers to activate their USB modems prior

to using them. Please, refer to connection guidelines provided by your

operator when concluding the agreement or placed on its website.

For LTE and CDMA USB modems, it is required to disable the PIN

code check on the identification card prior to connecting the USB

modem to the router.

1 Contact your operator to get information on the service coverage and fees.

DIR-825/ACF Quick Installation Guide

Supported USB Modems

GSM modems

•Alcatel X500

•D-Link DWM-152C1

•D-Link DWM-156A6

•D-Link DWM-156A7

•D-Link DWM-156C1

•D-Link DWM-157B1

•D-Link DWM-157B1 Velcom)

•D-Link DWM-158D1

•D-Link DWR-710

•Huawei E150

•Huawei E1550

•Huawei E156G

•Huawei E160G

•Huawei E169G

•Huawei E171

•Huawei E173 Megafon)

•Huawei E220

•Huawei E352 Megafon)

•Prolink PHS600

•ZTE MF112

•ZTE MF192

•ZTE MF626

•ZTE MF627

•ZTE MF652

•ZTE MF667

•ZTE MF668

•ZTE MF752

DIR-825/ACF Quick Installation Guide

CDMA modems2

•Airplus MCD-650

•Airplus MCD-800

•AnyDATA ADU-300A

•AnyDATA ADU-500A

•AnyDATA ADU-510A

•Huawei EC306

•ZTE AC5710

•ZTE AC5730

L E modems

•Huawei E3131

•Huawei E3272

•Huawei E3351

•Huawei E3372

•Huawei E367

•Huawei E392

•Megafon M100-1

•Megafon M100-2

•Megafon M100-3

•Megafon M100-4

•Megafon M150-1

•Megafon M150-2

•MTS 824F

•MTS 827F

•Quanta 1K6E Beeline 1K6E)

•Yota LU-150

•Yota WLTUBA-107

•ZTE MF823

•ZTE MF827

Smartphones in USB tethering mode

•Some models of Android smartphones

!The manufacturer does not guarantee proper operation of the router

with every modification of the firmware of USB modems.

2 Performance of CDMA USB modems is not tested for the current firmware version.

DIR-825/ACF Quick Installation Guide

CO ECTI G TO PC

PC wit Et ernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet cable between any of LAN ports located on the back

panel of the router and the Ethernet port of your PC.

3. To connect via USB modem: connect your USB modem to the USB port3

located on the back panel of the router.

!If you need to connect or change a USB modem to another one when

the router is powered on, power off the router, connect the modem to

the USB port, and power on the router.

4. To connect the device to a fiber optic line: connect your SFP transceiver

to the SFP port, then connect the fiber optic cable to the SFP transceiver.

5. To connect the device to an Ethernet line: in the web-based interface of

the router, select the router's LAN port that will be used as the WAN port

and create an Ethernet WAN connection. Then connect an Ethernet cable

between an available Ethernet port of the router and the Ethernet line.

!Please connect the router to the ISP's Ethernet line only after setting the

WAN port and creating the Internet connection.

6. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

7. Turn on the router by pressing the ON/OFF button on its back panel.

8. Turn on your PC and wait until your operating system is completely

loaded.

Now you should configure your PC to obtain an IP address automatically as

DHCP client).

3 It is recommended to use a USB extension cable to connect a USB modem to the

router.

DIR-825/ACF Quick Installation Guide

Obtaining IP Address Automatically

in OS Windows XP

1. Click the Start button and proceed to the Control Panel > etwork

and Internet Connections > etwork Connections window.

2. In the etwork Connections window, right-click the relevant Local

Area Connection icon and select the Properties line in the menu

displayed.

3. In the Local Area Connection Properties window, on the General

tab, select the Internet Protocol (TCP/IP) line. Click the Properties

button.

DIR-825/ACF Quick Installation Guide

4. Select the Obtain an IP address automatically and Obtain D S

server address automatically radio buttons. Click the OK button.

5. Click the ОК button in the connection properties window.

Now your computer is configured to obtain an IP address automatically.

DIR-825/ACF Quick Installation Guide

Obtaining IP Address Automatically

in OS Windows 7

1. Click the Start button and proceed to the Control Panel window.

2. Select the etwork and Sharing Center section. If the Control Panel

has the category view the Category value is selected from the View by

drop-down list in the top right corner of the window), choose the View

network status and tasks line under the etwork and Internet

section.)

3. In the menu located on the left part of the window, select the Change

adapter settings line.

4. In the opened window, right-click the relevant Local Area Connection

icon and select the Properties line in the menu displayed.

5. In the Local Area Connection Properties window, on the

etworking tab, select the Internet Protocol Version 4 (TCP/IPv4)

line. Click the Properties button.

Table of contents

Other D-Link Network Router manuals

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview