D-Link DIR-300 - Wireless G Router User manual

Other manuals for DIR-300 - Wireless G Router

16

Table of contents

Other D-Link Network Router manuals

D-Link

D-Link DIR-895L User manual

D-Link

D-Link 2Voice + 4SW VoIP Router DVG-1402S User manual

D-Link

D-Link DXN-W224 User manual

D-Link

D-Link DI-1162M User manual

D-Link

D-Link DES-3624 - Switch - Stackable User manual

D-Link

D-Link DHP-347AV User manual

D-Link

D-Link SharePort DIR-825 User manual

D-Link

D-Link DVG-5008S User manual

D-Link

D-Link DSL-500T User manual

D-Link

D-Link DSL-G624M User manual

D-Link

D-Link DIR-806A User manual

D-Link

D-Link DI-604UP User manual

D-Link

D-Link DWR-921 User manual

D-Link

D-Link Express EtherNetwork DI-604 User manual

D-Link

D-Link DSL-2750U User manual

D-Link

D-Link DWR Series User manual

D-Link

D-Link DWR-930M User manual

D-Link

D-Link DIR-300 - Wireless G Router User manual

D-Link

D-Link DSL-G604T User manual

D-Link

D-Link DSL-500 User manual

D-Link

D-Link DIR-X1860 User manual

D-Link

D-Link DIR-X5460 User manual

D-Link

D-Link DSL-320B User manual

D-Link

D-Link SharePort DIR-825 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300. Page 1of 3

Applying WPA-PSK Encryption

This document will detail how to setup WPA-PSK Encryption on the DIR-300.

WPA-PSK is now considered to be the standard with encrypting a wireless network, it is far

more secure then WEP and is therefore recommended.

D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300. Page 2of 3

1. First you will need a computer/laptop to be connected to one of the LAN Ethernet ports.

NOTE: If you are going to change your Wireless Encryption, DO NOT perform this over a

Wireless connection, connect your computer/laptop to a LAN Port.

2. Proceed to open an Internet Browser and login to the DIR-300 Web Configuration.

NOTE: Instructions are on the Technical Support Knowledge Base if you are unsure on

how to login to the Web Configuration.

3. Click on SETUP > Wireless Setup > Manual Wireless Connection Setup button.

4. Once you have access to the Wireless Setup page, there are only a couple of

adjustments needed to be made, please see below:

D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300. Page 3of 3

It is recommended to change the Wireless Network Name (SSID) to a name of your liking,

in this example it is called "home_network". Enable Auto Channel Selection can be

enabled however it is not mandatory. The Wireless Channel can be changed, Channel's 1,

6 and 11 are non overlapping and are recommended.

Under the WIRELESS SECURITY MODE heading select from the dropdown "Enable

WPA Only Wireless Security (enhanced)".

Under the WPA ONLY heading the Cipher Type and PSK/EAP settings are recommended

on their default setting. The Network Key is where you type in a password for your

Wireless, it can be alphanumeric and a minimum of 8 characters. The Network Key is

considered to be your Wireless Password. REMEMBER IT!

5. Now proceed to click on the Save Settings button.

6. WPA-PSK Encryption is now configured.

IMPORTANT:

If you decide to change your Wireless Encryption password, you will need to remove

your existing Wireless Profile or edit it to reflect the new changes.

Please remember to ensure your DIR-300 has the most current firmware version

applied. To apply this firmware please refer to the Technical Support Knowledge

Base.