D-Link DIR-820 User manual
Quick Installation Guide
DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
DIR-820 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DIR-820
•Power adapter DC 12V/0.5A
•Ethernet cable
•Quick Installation Guide” (brochure).
If any of the items are missing, please contact your reseller.
The User Manual” and Quick Installation Guide” documents are available
on D-Link website (see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DIR-820 Quick Installation Guide
Default Settings
Domain name of de ice dlinkrouter.local.
IP address of de ice 192.168.0.1
Username (login) admin
Password admin
Name of wireless network
(SSID)
2.4GHz DIR-820
5GHz DIR-820-5G
Network key (PSK password)
see WPS PIN on the barcode
label on the bottom panel of
the device
!
Router DIR-820 with default settings cannot connect to the Internet. To
get started, please set your own password for access to the web-based
interface and change the WLAN name (SSID); then, if needed,
configure other settings recommended by your ISP.
3
DIR-820 Quick Installation Guide
System Requirements and Equipment
•An Android or iPhone mobile device (smartphone or tablet) or a
computer with any operating system that supports a web browser.
•A PC web browser to access the web-based interface:
◦Apple Safari 8 and later
◦Google Chrome 48 and later
◦Microsoft Internet Explorer 10 and later
◦Microsoft Edge 20.10240 and later
◦Mozilla Firefox 44 and later
◦Opera 35 and later.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wireless network.
4
DIR-820 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
2. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
Then make sure that your PC is configured to obtain an IP address
automatically (as DHCP client).
5
DIR-820 Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 7)
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking tab, select the Internet Protocol Version 4 (TCP/IP 4)
line. Click the Properties button.
6
DIR-820 Quick Installation Guide
6. Make sure that the Obtain an IP address automatically and Obtain
DNS ser er address automatically choices of the radio buttons are
selected. Click the OK button.
7. Click the OK button in the connection properties window.
7
DIR-820 Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 10)
1. Click the Start button and proceed to the Settings window.
2. Select the Network & Internet section.
3. In the Change your network settings section, select the Change
adapter options line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking tab, select the Internet Protocol Version 4 (TCP/IP 4)
line. Click the Properties button.
8
DIR-820 Quick Installation Guide
6. Make sure that the Obtain an IP address automatically and Obtain
DNS ser er address automatically choices of the radio buttons are
selected. Click the OK button.
7. Click the Close button in the connection properties window.
9
DIR-820 Quick Installation Guide
PC with Wi-Fi Adapter
1. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
2. Make sure that the Wi-Fi adapter of your PC is on. As a rule, modern
notebooks with built-in wireless NICs are equipped with a button or
switch that turns on/off the wireless adapter (refer to your PC
documents). If your PC is equipped with a pluggable wireless NIC, install
the software provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address
automatically (as DHCP client).
10
Other manuals for DIR-820
1
Table of contents
Other D-Link Network Router manuals
D-Link
D-Link xStack DES-3200 Series User manual
D-Link
D-Link GO-DSL-N150 User manual
D-Link
D-Link DSL-520T User manual
D-Link
D-Link Amplifi DIR-657 User manual
D-Link
D-Link DIR-879 User manual
D-Link
D-Link DSL-G604T User manual
D-Link
D-Link DWR-M961 User manual
D-Link
D-Link DSL-6740B User manual
D-Link
D-Link myPocket DIR-457 User manual
D-Link
D-Link DGS-105 - Switch User manual
D-Link
D-Link AC1200 User manual
D-Link
D-Link DIR-821 User manual
D-Link
D-Link DSL-2540U User manual
D-Link
D-Link DSL-G604T User manual
D-Link
D-Link SharePort DIR-825 User manual
D-Link
D-Link DIR-605L User manual
D-Link
D-Link DIR-808L User manual
D-Link
D-Link DIR-615 - Wireless N Router User manual
D-Link
D-Link DSL-3590L User manual
D-Link
D-Link DSL-2640BT User manual
