CYP CPLUS-12FTX User manual

CPLUS-12FTX

4K UHD+HDMI over Fiber Transmitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

VS1 21/06/18 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 3

6.3 WebGUI Control ........................................ 4

6.4 RS-232 Control ......................................... 11

6.5 Telnet Control .......................................... 11

6.6 RS-232 and Telnet Commands .............. 12

7. Connection Diagram ....................................16

7.1 Conguration 1........................................ 16

7.2 Conguration 2........................................ 17

8. Specications ................................................18

8.1 Technical Specications ........................ 18

8.2 Video Specications............................... 19

8.3 Cable Specications .............................. 20

9. Acronyms .......................................................20

1. INTRODUCTION

This HDMI over Fiber Transmitter is designed to extend your 4K UHD

HDMI signal using a single segment of multi-mode optical ber

cable. Using ber optical cable provides many advantages over

traditional copper-based extension methods, including immunity to

RF and magnetic interference, thinner and lighter cables, and much

longer extension distances (up to 300 meters per segment). Multiple

ber Transceiver units can be placed between the Transmitter and

Receiver to greatly extend the total extension distance via cascading

(up to 300 additional meters per Transceiver) if the extra distance or

exibility is desired.

The HDMI input and output of this unit supports resolutions up

to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to

1080p@60Hz, HD audio formats and other features dened by

the HDMI 2.0 specication. The HDMI and Fiber outputs of this unit

are mirrored, however HDMI sources with bandwidth higher than

10.2Gbps are automatically chroma and/or bit-depth subsampled for

transmission over the ber output. Six pre-dened internal EDIDs, two

external EDID selections and a User uploaded EDID are available for

EDID management. The unit provides intuitive front panel controls as

well as RS-232, Telnet and WebGUI control options.

2. APPLICATIONS

• Entertainment Rooms & Home Theaters

• Showrooms & Demo Rooms

• Lecture Hall Presentations

• Public Commercial Displays

3. PACKAGE CONTENTS

• 1×HDMI over Fiber Transmitter

• 1×5V/2.6A DC Power Adapter

• 1×3.5mm to 9-pin D-sub Adapter Cable

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as a media player, video game

console or set-top box.

• HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

• Use of the optical ber output requires a compatible ber Receiver

or Transceiver and appropriate paired LC multi-mode ber in a

crossover conguration.

5. FEATURES

• HDMI with 3D & 4K@60Hz with HDR support

• DVI 1.0 compliant with the use of an HDMI-DVI adaptor

• HDCP 2.2 and 1.x compliant

• 1 HDMI (18Gbps) input

• Mirrored HDMI (18Gbps) and ber (10.2Gbps, LC pair, multimode)

outputs

• Supports UHD resolutions up to 4K@60Hz (4:4:4, 8-bit)

• Supports 16-bit Deep Color up to 1080p@60Hz

• HDMI sources with bandwidth higher than 10.2Gbps are

automatically chroma and/or bit-depth subsampled for transmission

over the ber output

• Supports pass-through of audio formats: LPCM 2.0/5.1/7.1, Bitstream,

and HD Bitstream

• Comprehensive EDID management support including 6 pre-dened

internal EDIDs, 2 external EDIDs, and 1 User uploaded EDID

• Compatible with the 3×2 HDMI and Fiber Matrix Transceiver

(optional)

• Fiber transmission distances of up to 300 meters

• Supports control via front panel, WebGUI, Telnet, and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE POWER

4K UHD+ HDMI / FIBER

TRANSMITTER

1SERVICE: This slot is reserved for rmware update use only.

2POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

6.2 Rear Panel

OUT

DC 5VRS-232

CONTROL

FIBER A HDMI 1HDMI B

4 5

1FIBER A & HDMI B OUT: Connect the HDMI output to an HDMI TV,

monitor or amplier for digital video and audio output. Connect

the ber (paired LC) output to the ber input on a compatible ber

Receiver or Transceiver unit.

Note: HDMI sources with bandwidth higher than 10.2Gbps

are automatically chroma and/or bit-depth subsampled for

transmission over the ber output.

2HDMI IN: Connect to HDMI source equipment such as a media

player, game console or set-top box. DVI sources are supported

with the use of an HDMI to DVI adapter.

3CONTROL: Connect directly, or through a network switch, to your

PC/laptop to control the unit via Telnet/WebGUI.

4RS-232: Connect, via the provided 9-pin adapter cable, to a PC,

laptop or other serial control device to send RS-232 commands to

control the unit.

5DC 5V: Plug the 5V DC power adapter into the unit and connect it

to an AC wall outlet for power.

6.3 WebGUI Control

• Device Discovery APP

Please obtain the “Device Discovery” software from your authorized

dealer and save it in a directory where you can easily nd it.

Connect the unit and your PC/Laptop to the same active network

and execute the “Device Discovery” software. Click on “Find Devices

on Network” and a list of devices connected to the local network will

show up indicating their current IP address.

Note: The unit’s default IP address is 192.168.1.50.

By clicking on one of the listed devices you will be presented with the

network details of that particular device.

1) IP Mode: If you choose, you can alter the static IP network settings

for the device, or switch the unit into DHCP mode to automatically

obtain proper network settings from a local DHCP server. To switch

to DHCP mode, please select DHCP from the IP mode drop-down,

then click “Save” followed by “Reboot”.

2) WebGUI Hotkey: Once you are satised with the network settings,

you may use them to connect via Telnet or WebGUI. The network

information window provides a convenient link to launch the

WebGUI directly.

• WebGUI Control Page

After connecting to the WebGUI’s address in a web browser, the

password then click “Submit” to log in.

Note: The default user name and password is “admin”.

On the left side of the browser you will see the following menu tabs

where all primary functions of the unit (Video, EDID Settings and

System Settings) are controllable via the built in WebGUI. The individual

functions will be introduced in the following sections.

Clicking the red “Logout” tab will automatically log the currently

connected user out of the WebGUI and return to login page.

Table of contents

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction