CYP PU-501 User manual
OPERATION MANUAL
PU-501
HDMI over Single CAT6
Transmiter and Receiver Set
(100m)
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology.
All Rights Reserved.
Version 1.0 November 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
RDV1 20101101 Preliminary Release
Table of Contents
1. Introduction ..................................................................................1
2. Applications .................................................................................1
3. Package Contents ......................................................................1
4. System Requirements ..................................................................1
5. Features ........................................................................................1
6. Specifications ..............................................................................2
7. Operation Controls and Functions ............................................. 3
7.1 Front Panel .................................................................... 3
7.2 Rear Panel .................................................................... 4
8. D-Sub 9 Pin Definitions.................................................................4
9. Connection and Installation ...................................................... 5
10. Acronyms .....................................................................................6
1
1. Introduction
The device that can make your home or ofce more efcient, this unit of HDMI
with RS-232 over Single CAT5e/CAT6 can transmit and receive uncompressed
audio/video, control through the built-in RS-232 and IR ports over 100M. Further,
with a HDMI bypass design it allows an instant display at the control point.
Hence, if you want to make your home or ofce more efcient, get the HDMI
over Single CAT5e/CAT6 and prepare to be amazed.
2. Applications
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. Package Contents
• HDMI over Single CAT5e/CAT6 Transmitter x 1
• HDMI over Single CAT5e/CAT6 Receiver x 1
• IR Blaster x 1
• IR Receiver x 1
• 5V 2.6A DC Power Adaptor x 2
• Operation Manual
4. System Requirements
Input HDMI source equipment such as DVD/Blue-Ray player and output display
with HDMI input jack.
5. Features
• HDMI 1.4 with 3D, 4k and 2k and 2k support, HDCP & DVI Compliant
• Supports HDCP repeater and CEC function
• Simultaneously uncompressed data sending over a single 100M/328ft
withCAT6 cable or 80M/262ft with CAT5e cable
• Uncompressed video 1080p, 60Hz, 48bits
• Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
• Various controls over HDMI CEC, RS232 & IR
• 3Play™ convergence: HDMI & Control (IR & RS232)
• Installation Friendly
2
6. Specications
Transmitter
Input 1 x HDMI , 1 x HDMI Bypass, 1 x RS-232, 1 x IR Extender,
1 x IR Blaster
Output 1 x CAT5e/6
Receiver
Input 1 x CAT5e/6, 1 x IR Extender, 1 x IR Blaster
Output 1 x HDMI, 1 x RS-232
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Operating Temperature 0°C ~ 40°C/ 32° ~104°
Storage Temperature -20°C ~ 60°C/ -4° ~140°
Relative Humidity 20~90% RH (non-condensing)
3
7. Operation Controls and Functions
7.1 Front Panel
Transmitter Receiver
1 2 3 4 5
1. HDMI Bypass: This slot is to connect with HDMI TV/monitor for instant
display HDMI input source signal. When the HDMI bypass is connected,
all signals will not transmit to the receiver side. Therefore, unplug this slot
after conrm image display.
2. HDMI In: This slot is to connect with HDMI source equipment such as
DVD/Blue-Ray player.
3. RS-232 In: This slot is to connect with PC/laptop with D-Sub 9 pin cable for
RS-232 control system.
4. HDMI Out: This slot is to connect with HDMI TV/monitor for display HDMI
input source signal.
5. RS-232 Out: This slot is to connect to the device that wishes to be
controlled with D-Sub 9 pin cable for RS-232 signal to be execute.
6. Specications
Transmitter
Input 1 x HDMI , 1 x HDMI Bypass, 1 x RS-232, 1 x IR Extender,
1 x IR Blaster
Output 1 x CAT5e/6
Receiver
Input 1 x CAT5e/6, 1 x IR Extender, 1 x IR Blaster
Output 1 x HDMI, 1 x RS-232
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Operating Temperature 0°C ~ 40°C/ 32° ~104°
Storage Temperature -20°C ~ 60°C/ -4° ~140°
Relative Humidity 20~90% RH (non-condensing)
4
7.2 Rear Panel
Transmitter Receiver
1 2 3 4 5 6 7 1 2 3 4 5 6 7
1. DC 5V: These slots are where you plug the 5V DC power supply into the
unit and connect the adaptor to an AC outlet.
2. IR 1/2 Blaster: These slots are to connect with the IR blaster cables
included in the package for IR signal transmitting.
3. IR 1/2 Extender: These slots are to connect with the IR receiver cables
included in the package for IR signal receiving.
4. HDCP LED: This red LED will illuminate in when the input source signal
contains HDCP data.
5. Link LED: This yellow LED will illuminate when the both input and output
signal is connected.
6. Mode LED: This green LED will blinking when the device is processing
data.
7. CAT5e/6 Out/IN: These slots are to be connected with a single CAT5e/6
cable for data transmitting.
8. D-Sub 9 Pin Denitions
Pin Dene
1 N/C
2 RxD
3 TxD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C
5
9. Connection and Installation
HD Monitor
or
DVD Blu-ray
TV/Monitor
CH-501RXCH-501TX
Hub/Server
NBPC
TV
MAC
CAT5e(100M)/
CAT6(80M)
HDMI
Cable
HDMI
HDMI
Ethernet
Cable
HDMI
Cable
HDMI
HDMI
HDMI
HDMI
HDMI
Cable
HDMI
HDMI
HDMI
HDMI
DC
DC
IR Extender
30°
30°
3M 3M
7M
DVD
Remote
6
Acronyms A
Acronym Complete Term
CAT5e Category 5 Cable
CAT6 Category 6 cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital content protection
HDMI High-Denition Multimedia Interface
IR Infrared
Table of contents
Other CYP Transmitter manuals
CYP
CYP CH-103TX User manual
CYP
CYP CH-306TXA & RXA User manual
CYP
CYP EL-2600V User manual
CYP
CYP PU-8H8CTXIR User manual
CYP
CYP IP-7000TX Installation manual
CYP
CYP AVX-101F-TX User manual
CYP
CYP CSI-8H8CVTX User manual
CYP
CYP CH-516TXAS User manual
CYP
CYP CH-1106TX & RX User manual
CYP
CYP CA-HDMIAT User manual
Popular Transmitter manuals by other brands
Dejero
Dejero EnGo 3x manual
Rosemount
Rosemount 4600 Reference manual
Speaka Professional
Speaka Professional 2342740 operating instructions
trubomat
trubomat GAB 1000 instruction manual
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 instructions
Rondish
Rondish UT-11 quick start guide
