CYP CH-527TXVBD User manual

CH-527TXVBD

4K UHD+ HDMI over HDBaseT Transmitter

with Bi-directional 24V PoC

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

VS1 2018/12/22 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel................................................. 3

6.2 Rear Panel.................................................. 4

6.3 IR Cable Pinouts ........................................ 5

6.4 RS-232 Bypass Pinout................................. 5

7. Connection Diagram ......................................6

8. Specications ..................................................7

8.1 Basic Specications .................................. 7

8.2 Video Specications................................. 8

8.3 Audio Specications................................. 9

8.4 Cable Specications .............................. 10

8.5 HDBaseT Features.................................... 11

9. Acronyms.......................................................12

1. INTRODUCTION

This HDMI over HDBaseT Transmitter is a great solution for extending

UHD video and audio as well as Ethernet and control via a single run

of Cat.5e/6/7 cable over distances up to 100 meters. This extender

complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as

well as supporting the legacy HDCP 1.x and HDMI 1.x standards. In

addition, despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD

HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as

well as 10/12-bit sources with HDR, are able to be processed and

extended by the use of AVLC (Adaptive Visually Lossless Compression)

when needed. Multiple data and control interfaces are also able to

be extended, including IR, RS-232, and LAN connections.

This unit supports bi-directional 24V PoC (Power over Cable) allowing

the system to be completely powered by, or provide power to, a

compatible connected Receiver, allowing for greater exibility within

different installation scenarios.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI to HDBaseT Transmitter with Bi-directional 24V PoC

• 1×24V/1.25A DC Power Adapter

• 1×2-pin Terminal Block

• 1×3.5mm to IR Blaster Cable

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as a media player, video game

console or set-top box.

• An HDBaseT Receiver equipped with AVLC and 24V PoC support is

strongly recommended.

• The use of “Premium High Speed” HDMI cables, and industry

standard Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

• HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

• HDCP 1.x and HDCP 2.2 compliant

• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

• Supports CEC bypass

• HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

24V PoC and Control (bi-directional IR/RS-232 pass-through)

• HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K

when using Cat.6a/7

• Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond

10.2Gbps (340MHz) allowing for support of sources up to 18Gbps

(600MHz) with no loss of visual quality

• Supports pass-through of many audio formats including LPCM

2.0/5.1/7.1, Bitstream, and HD Bitstream

• Bi-directional 24V PoC allows the unit to be powered by, or provide

power to, a compatible connected Receiver

Note: The 24V PoC function is designed to power, or receive power

from, compatible Receiver units only. Non-PoC Receivers will need

their own power supply. Other brands of Receiver may not be

compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

RS-232

POWER

ISP

LAN

STD

UPDATE

SYNC

1 2 3 4 5

1ISP Pinhole: This button is reserved for factory use only.

2STD/UPDATE Switch: This switch is reserved for factory use only.

Note: This should be left on the default setting of “STD” for normal

operation.

3RS-232 Port: Connect to a PC, laptop, or serial controllable device

for the extension of RS-232 signals between both ends of the

HDBaseT connection.

4LAN Port: Connect to an Ethernet supporting device or to your

local network, as appropriate, to extend the network to both ends

of the HDBaseT connection.

5POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

SYNC LED: This LED will illuminate when a live input source is

detected.

6.2 Rear Panel

HDMI IN

CAT5e/6/7

OUT

EXTENDER

BLASTER

DC 24V

1 2 3 4 5

1DC 24V Terminal Block: Plug the 24V DC power adapter into this

terminal block and connect it to an AC wall outlet for power.

(Optional)

Note: This connection is not required if the unit is receiving power

via 24V PoC from the Receiver.

2IR BLASTER Port: Connect to the provided IR Blaster to transmit IR

signals from the other end of the HDBaseT connection to devices

within direct line-of-sight of the IR Blaster.

3IR EXTENDER Port: Connect to an IR Extender to receive IR control

signals and extend them to devices connected to the other end

of the HDBaseT connection. Ensure that the remote being used is

within direct line-of-sight of the IR Extender.

4CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver

with a single Cat.5e/6/7 cable for transmission of all data signals.

24V PoC can also be supplied to, or received from, a connected

compatible Receiver.

Note: The 24V PoC function is designed to power, or receive

power from, compatible Receiver units only. Non-PoC Receivers

will need their own power supply. Other brands of Receiver may

not be compatible.

5HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box. DVI sources are supported

with the use of an HDMI to DVI adapter.

6.3 IR Cable Pinouts

IR Blaster

Cabl

Infrared

Power

Not U

sed

IR Extender

Cabl

Infr

ared

Power

Ground

6.4 RS-232 Bypass Pinout

DCD

RxD

TxD

DTR

GND

CTS

RTS

DSR

DE-9

Female Port

Table of contents

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction