CYP OR-HD62CD-4K22 User manual
OR-HD62CD-4K22
6x2 HDMI Matrix Switch with Audio De-Embedding
(4K HDR, 18Gbps (6G) resolution support & HDCP2.2)
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 12/03/2018 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel...................................................10
6.3 Remote Control........................................11
6.4 IR Cable Pin Assignments .....................12
6.5 RS-232 Protocol........................................12
6.6 RS-232 and Telnet Commands............13
6.7 Telnet Control............................................17
6.8 WebGUI Control .......................................18
7. Connection Diagram .......................... 25
8. Specifications...................................... 26
8.1 Technical Specifications ........................26
8.2 Video Specifications................................27
9. Acronyms............................................. 28
6
1. INTRODUCTION
This 4K UHD+ 6 by 2 Matrix provides the ability to connect up to six 4K
UHD HDMI sources to up to two 4K UHD HDMI displays and freely switch
between them. This unit comes with full support for 18Gbps (600Mhz)
resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as well as support
for 16-bit Deep Colour (up to 1080p@60Hz), HDR (High Dynamic Range),
HD audio and other features defined by the HDMI 2.0 specification.
With a comprehensive EDID management feature that includes the ability
to select between six built in default EDIDs, or an EDID copied from a
connected sink device, this matrix can solve many interconnectivity
problems.
Added flexibility comes from the ability to extract audio from each HDMI
output’s source and output it as optical digital audio (LPCM 2.0 and
standard Bitstream only). Six fully configurable presets are also provided
to simplify the routing process. This unit provides an intuitive set of front
panel controls with associated LCD, as well as RS-232, Telnet, WebGUI, and
IR remote control options.
2. APPLICATIONS
Entertainment Rooms & Home Theaters
Lecture Rooms
Showrooms & Demo Rooms
Public Commercial Displays
3. PACKAGE CONTENTS
1×4K UHD+ 6 by 2 HDMI Matrix
1×Remote Control (CR-175)
1×IR Extender Cable
1×5V/3A DC Power Adaptor
1×Rack Mount Ears (Set of 2)
1×Operation Manual
7
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media players, video game consoles
or set-top boxes.
HDMI receiving equipment such as HDTVs, monitors or audio
amplifiers.
The use of “Premium High Speed HDMI”cables is highly recommended.
5. FEATURES
HDMI input and output with 18Gbps (600MHz) 4K UHD support
DVI 1.0 compliant with the use of an HDMI-DVI adaptor
HDCP 1.4 and 2.2 compliant
Supports HD resolutions up to 3840×2160@60Hz (YUV 4:4:4, 8-bit) and
4096×2160@60Hz (YUV 4:4:4, 8-bit)
Supports 16-bit Deep Colour up to 1080p@60Hz
6 HDMI inputs and 2 HDMI outputs
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
Bitstream, and HD Bitstream
Display any of 6 high-definition sources on up to 2 HDTV displays
simultaneously
Optical audio extraction paired with each HDMI output (LPCM 2.0 or
Bitstream only)
Supports 6 internal EDIDs or 2 external EDIDs copied from connected
devices
Controllable via front panel buttons with LCD, WebGUI, Telnet, RS-232,
and IR remote
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
OUT AOUT B
IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 MUTE CONFIRM
CANCEL
ENTER
MENU
PRESET
ALL
INFO
LOCK
+
-
1 2 4 5 7 9
3 6 8 11 13
10 12 14 15
1POWER: Press this button to power the unit on (green LED) or place it
into stand-by mode (red LED).
Note: Ethernet, RS-232, and IR remain active while the unit is in stand-by
mode.
2IR WINDOW: Accepts IR signals from the included IR remote for
control of this unit only.
3OUT A~B: Press the “OUT” keys (A or B) of the outputs you wish to
route a source to (the letter will flash in the LCD to indicate selection).
Pressing an OUT button a second time will de-select that output.
4IN 1~6: After selecting one or more outputs, press the “IN”key of
the input (1~6) you wish to route to the selected output(s). In Preset
selection mode, these buttons are used to select the saved preset to
use.
Note: The “CONFIRM” button (Item 7) must be pressed to activate the
selected routing configuration.
5MUTE: The “MUTE” button functions as a blank audio/video source.
To use it, follow the standard matrix routing instructions, but use the
“MUTE” button as the input to blank out the selected outputs. When a
“MUTE” input is in use it will show up as “M” within the routing display.
6CANCEL: Press to cancel/undo any un-confirmed routing change
selections.
7CONFIRM: Press to confirm and activate newly made input/output
routing selections.
Note: It is possible to configure multiple I/O routes prior to pressing the
“CONFIRM” button.
8MENU: Press to enter the LCD menu, or to back out from menu items.
9ENTER: Press to confirm a selection within the LCD menu or to go
9
deeper into a menu item.
10 + & −: Press to move up and down or adjust selections within the LCD
menus.
11 ALL: Press this button to select all outputs simultaneously for routing
(the letters will flash in the LCD to indicate selection). Press it a second
time to de-select all outputs.
12 PRESET: Press to enter the preset recall menu in the LCD window.
Press the numbered“IN” button of the Preset you wish to activate
followed by the“CONFIRM” button to activate it.
13 LOCK: Press to lock all button functions on the front panel. Press and
hold for 3 seconds to release the lock function. The LCD will display
“Lock” when the function is active.
14 INFO: Press to show the current input/output routing and detected
resolution on each output’s OSD.
15 LCD WINDOW: Displays the unit’s menu, settings, and information.
10
6.2 Rear Panel
IR IN DC 5V
RS232
CONTROLSERVICE
OPTICAL OUT
AB
HDMI OUT
AB
HDMI IN
123456
1 2 3 4 5 6 7 8
1HDMI IN 1~6: Connect to HDMI source equipment such as media
players, game consoles or set-top boxes. DVI source equipment may
be connected by using HDMI to DVI adapters.
2HDMI OUT A~B: Connect to HDMI TVs, monitors or amplifiers for
digital video and audio output. DVI display equipment may be
connected by using HDMI to DVI adapters.
3OPTICAL OUT A~B: Connect to powered speakers or amplifiers for
digital audio output using appropriate optical cables. The audio from
each optical output will be the same as the HDMI output it is paired
with (LPCM 2.0 and standard Bitstream only).
4SERVICE: This slot (USB 2.0) is reserved for firmware update use only.
5CONTROL: Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI.
6RS-232: Connect directly to your PC/laptop to send RS-232 commands
to control the unit.
7IR IN: Connect to the provided IR Extender to extend the IR control
range of the unit. Ensure that the remote being used is within direct
line-of-sight of the IR Extender.
8DC 5V: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power.
Table of contents
Other CYP Switch manuals
