CYP CH-2537TXWPUS Installation manual
CH-2537TXWPUS
4K UHD+HDMI/VGA over HDBaseT Wallplate Switcher
with Signal Event Automation
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 22/06/18 Preliminary release
VS1 04/07/18 Final technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................2
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................4
6.1 Front Panel ................................................. 4
6.2 Rear Panel.................................................. 5
6.3 WebGUI Control ........................................ 6
6.3.1 Switch Tab......................................... 8
6.3.2 Automation Tab ............................. 10
6.3.3 EDID Settings Tab ........................... 12
6.3.4 System Settings Tab ....................... 14
6.4 RS-232 Control ......................................... 15
6.5 Telnet Control .......................................... 16
6.6 RS-232 and Telnet Commands .............. 17
7. Connection Diagram ....................................31
8. Specications ................................................32
8.1 Technical Specications ........................ 32
8.2 Video Specications............................... 33
8.3 Audio Specications............................... 34
8.4 Cable Specications .............................. 34
8.5 HDBaseT Features.................................... 35
9. Acronyms .......................................................36
1
1. INTRODUCTION
This Wallplate Switcher is an HDMI and VGA switch with audio
embedding and HDBaseT output. The wallplate is designed for
use with US single-gang sized enclosures. This Transmitter can send
uncompressed high-denition video/audio over a single cable up
to a distance of 100 meters at 1080p@60Hz. The HDMI input supports
resolutions up to 4K@60Hz (4:4:4, 8-bit) and the VGA input supports
resolutions up to WUXGA (RB). With the use of the 3.5mm audio input,
stereo audio may be embedded with VGA or DVI sources as well.
Despite HDBaseT’s 10.2Gbps bandwidth limitation, high bandwidth 4K
UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit),
can be supported and will be automatically converted to 8-bit color,
or the 4:2:0 color space when necessary.
Automatic input detection between the HDMI and VGA inputs with
hot plug detection is supported, enabling hands-free operation. A
multi-function button on the face of the unit provides access to an
information OSD as well as allowing manual input selection. When
paired with a compatible Receiver, additional functionality such
as EDID management, HDCP management and basic signal event
automation (via RS-232 or CEC) also becomes accessible.
This Transmitter (PD) may be powered locally or via 48V PoH from a
compatible HDBaseT Receiver (PSE), which allows for greater exibility
in installations. The unit can be controlled via the front panel button
with OSD. When paired with a compatible Receiver it may also be
controlled via WebGUI, Telnet, and RS-232 making it exceptionally
versatile.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture halls, auditoriums and classroom
• Houses of worship
• Conference rooms and boardrooms
• Hotel event spaces
2
3. PACKAGE CONTENTS
• 1×HDMI/VGA over HDBaseT Wallplate Switcher
• 1×2-pin Terminal Block
• 1×US 1-Gang Faceplate
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI or VGA source equipment such as a media player, video
game console or set-top box.
• A compatible HDBaseT Receiver is required. An HDBaseT Receiver
capable of suppling 48V PoH is recommended.
• The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly
recommended.
• The use of “Premium High Speed HDMI” cable is highly
recommended.
5. FEATURES
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 2.2 and HDCP 1.x compliant
• 1 HDMI input
• 1 VGA input with 3.5mm mini-jack audio input
• Wall plate is designed for US one-gang sized enclosures
• Supports HDMI input resolutions up to 4K@60Hz (4:4:4, 8-bit)
• Supports VGA input resolutions up to WUXGA (RB)
• Analog stereo audio may be embedded with VGA or DVI/HDMI
sources
• HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with
automatic color space conversion of 4K@50/60Hz (4:4:4, 8-bit) or
4K@any (10/12-bit) sources
• Simultaneous transmission of uncompressed video, audio and
data over a single 100m/328ft Cat.5e/6/7 cable at 1080p60 and
70m/230ft at 4K
• HDBaseT feature support: HD Video and Audio, and 48V PoH (PD)
3
• Supports CEC bypass
• User activated information OSD
• Unit may be powered locally or via 48V PoH from a compatible
HDBaseT Receiver (PSE)
• Supports manual input selection or automatic input selection with
hot plug detection
• Basic signal event automation (via RS-232 or CEC w/ compatible
Receiver)
• USB port supports rmware update and powering of 5V/500mA
devices
• Front panel LEDs indicate HDCP mode, input source, and power
• Controllable via a multi-function front panel button with OSD, or via
WebGUI, Telnet, and RS-232 (w/ compatible Receiver only)
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDCP
SRC
PWR
INFO.
HDMI
VGA
SERV.
L/R
FAC
RESET
1
2
3
47
6
5
1FAC RESET Button: Press and hold for 5 seconds to reset the unit to
its factory defaults.
2SERV.: This slot is reserved for rmware update use only.
Note: This USB port can provide up to 500mA to connected
devices.
3L/R IN: Connect to the stereo analog output of a device such as
an audio player or PC for embedding into the HDBaseT output.
4INFO Button: A short press of this button will switch between the
available inputs. Pressing and holding this button for 2 seconds will
activate the information OSD.
5VGA IN: Connect to VGA source equipment such as a PC or
laptop.
6HDCP LED: This LED indicates the HDCP mode of the current input.
Green indicates Follow Display mode, orange indicates Follow
Source mode, off indicates HDCP is disabled.
SRC LED: This LED indicates which source is currently selected.
Green indicates the HDMI input, orange indicates the VGA input.
PWR LED: This LED will illuminate to indicate the unit's power and link
status. Orange indicates the unit is on and receiving power, green
indicates the unit is on, receiving power, and has successfully
5
linked to a compatible Receiver.
7HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box.
6.2 Rear Panel
1
2
1CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with
a single Cat.5e/6/7 cable for transmission of all data signals.
2DC 12V: Connect a 12V DC power adapter to the twin terminal
block and connect it to an AC wall outlet for power. (Optional, not
required when powered by PoH from the Receiver.)
Table of contents
Other CYP Switch manuals
