CYP EL-8300VA User manual
EL-8300VA
Advanced 4K HDMI, USB Type C, Display Port, VGA and
HDBaseT Presentation Switch
OPERATION MANUAL
®
registered trademarks of HDMI licensing Administrator, Inc.
iii
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2020 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
iv
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use
to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2020/03/18 Preliminary release
RDV2 2020/08/12 Added Audio Delay and Trigger conguration
v
CONTENTS
1. Introduction................................................ 1
2. Applications ................................................ 1
3. Package Contents ....................................... 2
4. System Requirements ................................ 2
5. Features....................................................... 3
6. Operation Controls and Functions............ 4
6.1 Front Panel ...........................................................4
6.2 Rear Panel.............................................................5
6.3 IR Cable Pinouts .................................................8
6.4 RS-232 Pinout and Defaults...........................8
6.5 OSD Menu ............................................................9
6.6 WebGUI Control .............................................. 27
6.6.1 Video Tab ................................................ 29
6.6.2 HDCP Tab................................................ 31
6.6.3 Picture Tab.............................................. 32
6.6.4 Audio Tab................................................ 34
6.6.5 OSD Tab................................................... 36
6.6.6 EDID Tab.................................................. 37
6.6.7 System Tab ............................................. 39
6.7 Telnet Control................................................... 41
6.8 Serial and Telnet Commands...................... 42
7. Connection Diagram ................................ 65
8. Specifications............................................ 66
8.1 Technical Specifications ............................... 66
8.2 Video Specifications....................................... 68
8.2.1 Bypass Output ...................................... 68
8.2.2 Scaled Output....................................... 70
8.3 Audio Specifications...................................... 72
8.3.1 Digital Audio ......................................... 72
8.3.2 Analogue Audio................................... 73
8.4 Cable Specifications ...................................... 74
8.5 HDBaseT Features........................................... 75
9. Acronyms................................................... 76
1
1. INTRODUCTION
This 8 by 2 multi-format scaling switcher provides HDMI, USB-C,
DisplayPort, and VGA inputs which can be freely selected for output at
a scaled resolution of the user’s choosing over the mirrored HDMI and
HDBaseT outputs. The HDMI, DisplayPort, and USB-C inputs and HDMI
output support resolutions up to 4K@60 (4:4:4, 8-bit) while the VGA
input supports resolutions up to WUXGA. The HDBaseT output supports
automatic colour subsampling of 4K50/60(4:4:4) sources to 4K50/60(4:2:0)
and provides a great solution to extend your audio and video up to 100
metres over a single run of Cat.6A cable as well as providing PoH power to
a compatible HDBaseT receiver.
This unit also includes multiple analogue stereo audio inputs and a
microphone input along with an amplified analogue stereo output to
provide a range of audio routing and mixing exibility. The built-in audio
mixer function allows the user to mix audio from any LPCM 2.0 source
with the microphone input for presentation or lecture usage. The ability
to switch back and forth between mixed and non-mixed audio greatly
simplies the presentation experience.
A trigger input interface is also provided to allow the easy addition of a
remote control keypad, or other trigger-supporting products, which can
be installed within a podium or within a table in a conference room or
classroom. This interface can allow the user to activate functions with
the simple press of a button. Standard control is available via front panel
buttons with an On-Screen Display (OSD), WebGUI, Telnet, Triggers, and
RS-232 making it exceptionally versatile.
2. APPLICATIONS
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
2
3. PACKAGE CONTENTS
1× UHD+8x2 Multi-Format to HDMI/HDBaseT Switcher with Scaler
1× 24V/6.25A DC Power Adapter
1× Rackmount Ears (Set of 2)
1× Shockproof Feet (Set of 4)
1× Operation Manual
4. SYSTEM REQUIREMENTS
HDMI/DisplayPort/USB-C source equipment such as media players,
video game consoles or set-top boxes.
VGA source equipment such as a PC, or laptop.
HDMI receiving equipment such as an HDTV, monitor, or audio
amplifier.
Analogue audio receiving equipment such as audio amplifiers or
powered speakers.
A compatible HDBaseT receiver with PoH(PD) support is recommended.
The use of Premium High Speed HDMI cables, and industry standard
Cat.6, Cat.6A or Cat.7, is highly recommended.
3
5. FEATURES
HDMI 2.0 and DVI 1.0 compliant
HDCP 1.x and 2.2 compliant
8 video inputs (1×USB-C, 1×DisplayPort, 5×HDMI, 1×VGA)
2 mirrored video outputs (1×HDMI, 1×HDBaseT)
Supports switching and scaling of all AV inputs for display over the
mirrored HDMI and HDBaseT outputs
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) digital video
input (HDMI, USB-C, DP) and output (HDMI)
VGA input supports resolutions up to 1080p60/WUXGA (RB)
HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) or
4K@30Hz (4:4:4, 8-bit). 4K@50/60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit)
sources will be automatically colour space converted to t within the
available bandwidth
Supports Deep Colour input and output up to 12-bit (Bypass only)
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
(HDMI Bypass only)
HDBaseT output extends video, audio, and data over a single
Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K when
using Cat.6A/7
Supports pass-through of many audio formats including LPCM (up to 8
channels), Bitstream and HD Bitstream
Audio mixer function allows the mixing of audio from any LPCM 2.0
audio source with the microphone input
Trigger Control Keypad support for easy, single-button, function
activation (Optional)
Supports standard PoH (PSE) from the HDBaseT output to a connected
HDBaseT (PD) receiver (compatible receivers only)
USB Type-C port provides up to 60W of power to connected devices
Comprehensive EDID and HDCP management
Controllable via front panel controls with OSD, RS-232, Telnet, WebGUI,
and triggers
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
USB-C DP HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 VGA
WUXGA
VIDEO IN
HDMI OUT
BYPASS
POWER
MENU ENTER
1080P
-
+
AMPLIFIER
LINE OUT
SELECT
VOLUME
MIC
SELECT
MIX
AUDIO OUT
EL-8300VA
1 2 3 4 5 6 7 8 9 10
1POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2MENU Button: Press to enter the OSD menu, or to back out from
menu items.
3MINUS (-) Button: Press to move down or adjust selections within
OSD menus.
4PLUS (+) Button: Press to move up or adjust selections within OSD
menus.
Note: Pressing the “+” button when not in a menu will toggle the video
freeze feature.
5ENTER Button: Press to conrm a selection within the OSD or to go
deeper into a menu item.
Note: Pressing “ENTER” and “+” together will reset the output resolution to
WUXGA (1920×1200@60Hz). Pressing “ENTER” and “-” together will reset
the output resolution to 1080p@60Hz.
6HDMI OUT BYPASS Button & LED: Press this button to enable or
disable the HDMI video Bypass function. When bypass is enabled, the
LED will illuminate.
7VIDEO IN Buttons & LEDs: Press any of these buttons to switch
immediately to the corresponding input. An LED will illuminate to
indicate which source is currently selected.
8AUDIO OUT SELECT Button & LEDs: Press this button to select the
microphone mix mode of the unit. The LED will illuminate to indicate
the current mix mode. When both LEDs are o, the mixer is disabled.
Note: Activating Mixer On mode, or MIC Only mode will automatically
disable HDMI Out Bypass mode.
9VOL. Button & LEDs: Press this button to select which audio output’s
volume is controlled by the volume knob. When both LEDs are o, the
knob controls the HDMI audio output (LPCM 2.0 only).
Table of contents
Other CYP Projector Accessories manuals
