CYP CMSI-3232 User manual

CMSI-3232/1616/88

HDMI Matrix

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 September 2012

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 13/09/12 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................5

6.3 RS-232 Protocols ...............................6

6.4 RS-232 & Telnet Command .............7

7. Connection Diagram ............................ 9

8. Specications ...................................... 10

9. Acronyms ............................................. 11

1. INTRODUCTION

The Modularized HDMI Matrix series can route the signal of 32, 16 or 8

sources to any connected 32, 16 or 8 displays, providing resolution up

to Full HD 1080p and WUXGA (1920x1200@60HzRB). Besides the regular

matrix functionality, the matrix models are very attractive to the

integrators because of their great exibility, with the most advanced

modularization design these models can be setup as a matrix of HMDI,

DVI-D, or their any combinations (count with eight, for example, a

matrix with 24-HDMI-in/8-DVI-IN and 16-HDMI-OUT/16-DVI-OUT), all you

need to do is to swap the input or output modules as you wish.

2. APPLICATIONS

• Public information display

• Educational demo

• Professional Presentation

• Advertising display

3. PACKAGE CONTENTS

• 1 x Enclosure 3232/1616/88 (including control board, & power(s))

• 4 x Input Module Board (Optional)

• 4 x Output Module board (Optional)

• 2 x Power Cord/3232& 1616 or 1 x Power Cord/88

4. SYSTEM REQUIREMENTS

Input source equipments like DVD/Blu-ray players and output display

TV/monitor with HDMI connection cables.

5. FEATURES

• HDMI, HDCP 1.1 and DVI 1.0 compliant

• Changeable input and output board

• Input and output module types can be mixed and added in

increment of 8 from 8x8 up to 32x32 with HDMI, DVI and CAT5e/6/7

interfaces

• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio transmission

• Supports a wide range of PC and HDTV resolutions from VGA to

WUXGA and 480i to 1080p

• Supports RS-232, Telnet and Ethernet controls

• Supports redundant power supply (on 3232 & 1616)

• HDMI cable length with a resolution 1080p/8bits&12bits the Input/

Output source can be 15/15m(8bit) and 10/10m(12) away

• EDID modes:

a. Automatic mode: Taking EDID from the lowest output port

b. Manual mode: Can assign any output to any input port

c. Standard mode: factory default

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

PAGE

R: STANDBY

FLASH: ALERT

RETURN

ALL

OUT/IN

LOCK

SAVE

RECALL

ENTER

6 8 7 9

1LCM: Displays the setting information of each input and output

and other setting information according to the selection.

2POWER & LED: This LED will illuminate when the power is in standby

mode. If the LED is ashing it means the temperature inside is too

high and air circulation is highly suggested.

3RETURN: Press this button to return back/exit the current selection.

4PAGE▲▼◄►: Use these buttons to ip the LCM’s page for

displaying the current I/O status or when entering into the menu for

detail selection.

5MENU: Press this button to enter into the menu selections of

A. EDID

1. Auto EDID: Base on the rst connected output TV/Display’s

EDID from 1~32 ports.

2. Standard EDID: Use the built-in EDID which supports video

up to 1080p@60/WUXGA@60RB and audio supports LPCM

2CH.

3. Manual EDID: Support independent EDID by appoint input

and output ports.

B. IP

1. IP address,

2. Netmask,

3. Gateway.

C. Temperature

1. Temperature 1,

2. Temperature 2, these gures shows the temperature of the

device inside.

6ALL: Press this button to select all outputs with one input.

70~9: Press these numbers when selecting input output ports.

8OUT/IN: Press this button to select input source to displaying on

output display. The sequence should be OUT/IN→number(s) for

input source→OUT/IN→a number for output display→Enter.

9+: Press this button when selecting more than one output for an

input selection. (This button works only under OUT/IN function)

10 LOCK & LED: Press this button to lock all the function buttons on

panel. The LED will illuminate, to unlock press it again.

11 SAVE: Press this button to save the present setting of the I/O. There

are 3 sets available for saving.

12 RECALL: Press this button to recall from the saving settings of 1~3.

13 ENTER: Press this button every time to conrm the setting or the

selection.

6.2 Rear Panel

OUTPUT

1 8

9 16

17 24

25 32

9 16

17 24

25 32

INPUT

CPU

RS232 ETHERNET IR IN USBOUTPUT 0

100-240VAC

50/60 Hz

4 5

1OUTPUT 1~32: Connect HD/3D display TV/monitor with HDMI cables

up to 32 displays.

2CPU

a. USB: This port is reserved for rmware update only.

b. IR IN: Reserved.

c. ETHERNET: Connect to an active network line for LAN serving

and Telnet/Web GUI control.

d. RS-232: Connect with D-Sub 9-pin cable from the PC/NB device

for RS-232 control over the device.

3INPUT 1~32: Connect source equipment such as Blu-ray/PS3 players

up to 32 sets with HDMI cable.

4POWER & POWER Supply: When the device will automatically turns

on when connecting with power supply.

5Ventilation Fan: This fan will automatically turns on when the device

is switch to ON. Do not block this port of the device or cover it with

any object. Please allow adequate space around the unit for air

circulation

This manual suits for next models

Table of contents

Popular Matrix Switcher manuals by other brands

Broadcast Tools

Broadcast Tools SS 8.2 Installation and operation manual

Altimium

Altimium MATF32 user manual

ALFAtron

ALFAtron ALF-MUK44N manual

Monoprice

Monoprice Blackbird 15377 user manual

Kramer

Kramer XL 3216VS Specifications

PTN

PTN FMX12 user manual

Kramer

Kramer VP-2x2 user manual

Kramer

Kramer Sierra Video 6432V5xl Specifications

TESmart

TESmart HMA0402A40 quick start guide

Octava

Octava HD4XSTPMX installation guide

Intelix

Intelix FLX-88 Installation and operation guide

Kramer

Kramer LASSEN XL 3232S Specifications

Roland

Roland XS-1HD owner's manual

Kramer

Kramer VS-66HDCPxl user manual

Atlona

Atlona AT-HDMI-22M user manual

Link

Link HD8X8 user manual

AMX

AMX AVS-OP-2020-117 Product View

Lindy

Lindy 38042 quick start guide