CYP CDPS-44SM User manual
CDPS-44SM
HDMI 4×4 Seamless Quad Matrix
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person to walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 19/03/13 Preliminary Release
RDV2 17/04/13
VS1 23/05/13 Updated format/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel.........................................3
6.2 Rear Panel .........................................5
6.3 Remote Control.................................6
6.4 Remote Control Dip Switch .............7
6.5 RS-232 Protocols ................................7
6.6 RS-232 and Telnet Control................8
6.7 RS-232 and Telnet Commands ........9
6.8 OSD Menu........................................13
6.9 Resolution Supports.........................18
7. Connection Diagram .......................... 19
8. Specications ...................................... 20
9. Acronyms ............................................. 20
1
1. INTRODUCTION
This 4 by 4 HDMI Seamless Matrix is an advanced 4 Way HDMI switch
with integrated Multi-view POP (Picture -out-of Picture) technology.
This plug and play solution offers advanced control and display
options for the integration of 4 sources onto 4 displays. It provides
3 output modes, Matrix, Dual and TV Wall. Matrix mode can route
and switch just like a normal matrix, the Dual mode allows 2 sets
of 2 selected sources to be displayed in a Picture-out-of-Picture
conguration and the TV Wall mode displays a selected source over 4
displays as if it were a single video image.
The device supports resolutions up to WUXGA@60 (RB) and
1080p@60 Hz, audio formats up to 7.1CH LPCM at 192 kHz sampling
rate based on the source EDID. It has the added benet of control
through IR, remote control, Telnet/IP, RS-232 or front panel buttons.
2. APPLICATIONS
• Broadcasting control room
• Surveillance control room
• Public advertisement displays
• HDMI Input extending
• Video Wall Systems
3. PACKAGE CONTENTS
• 1× 4 by 4 HDMI Seamless Matrix
• 1× Remote Control (CR-125)
• Software CD Driver (Optional)
• 1×12 V/3 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as DVD/Blu-ray players or any video
signal and PC/Notebook devices and output HD TV/monitor.
2
5. FEATURES
• HDMI, HDCP1.1 and DVI compliant
• Supports Deep Color 8/10/12 bit
• Seamless switching of HDMI sources
• Supports three different display modes: Matrix, Dual, Video Wall
-Matrix mode: Can seamlessly switch between and output from
any 4 sources to any 4 displays, as per a normal matrix switch
-Dual mode: Can display a POP (Picture-out-of-Picture) image
combined from 2 sources to be presented on the HDMI output
ports (Dual A and Dual B)
-Video Wall mode: Can split a single source to 4 displays e.g a 2 by
2 Video wall as a full image with adjustable Bezel Correction
• Supports control via On-screen Display (OSD), RS232, Telnet (IP), IR
Remote control and on-panel controls
• Supports Input resolutions of VGA~WUXGA and 480i~1080p
• Supports Output resolutions of 480p~1080p
• Supports different input resolution and output resolution selectable
from the OSD menu. The default setting for the output resolution is
720p@60 Hz/2CH LPCM
• Supports High denition Audio formats: LPCM 2CH/6CH/8CH, Dolby
Digital, DTS, Dolby Digital Plus, Dolby TruHD and DTS-HD Master
Audio
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
-
+
1
INPUT 234SAVE RECALL
A
OUTPUT BCD
4X4 SEAMLESS MATRIX CDPS-44SM
LOCK
MATRIX/
DUAL/WALL
XGA
720P
MENU
21 3 4 5 9 10
87
1IR Window: Accepts the IR signal from the supplied remote control.
2POWER: Press to turn the unit ON or to put it into standby mode.
Note: Press and hold the POWER while connecting the power
supply to reset the system to the default settings.
3MENU: Press this button to bring up the On-screen Display (OSD)
menu on screen.
Note:PresstheMENUbuttonsimultaneouslywiththe'−'(MINUS)
button to immediately switch the output resolution to 720p@60 Hz.
PresstheMENUbuttonwithsimultaneously'+'(PLUS)buttonto
immediatelyswitchtheoutputresolutiontoXGA(1024×768@60Hz).
4Plus or Minus (−/+) Buttons:Press these buttons to navigate down/
up the OSD then press the MENU' button to conrm.
5 CHANNEL INPUT 1/2/3/4 and CHANNEL OUTPUT A/B/C/D:
Matrix mode:
1) Press the 'MATRIX/DUAL/WALL' button to switch to Matrix mode.
The LED will stay lit when in this mode.
2) Press an output from A/B/C/D and then press the
corresponding input (from 1/2/3/4).
For example, press output A then press input 1, output A will
switch to input 1 and display the signal. The setting for each
output must be set individually.
Dual mode: Combines 2 sources to be presented on each of the
HDMI outputs (Dual A and Dual B). Dual Group A are outputs A
and B combined, Dual group B are outputs C and D combined.
Each group will output the same image simultaneously.
1) Press 'MATRIX/DUAL/WALL' button to switch to Dual mode. The
LED will turn off when in this mode.
2) Press the 'A' or 'B' output buttons and then press the required
4
input (1 or 2).
For example, press the output 'A' button then press the input 1
button, output A will display the video from input 1 on the left side
of the screen, then press the output 'B' button and then press the
button for input 2, output 'A' will display the video from input 2 on
the right side of the screen. The video image will be identical for
both output A and B.
3) Press button A or B for 3 seconds to switch the audio for
Dual Group A between output A or B. Press button C or D for 3
seconds to switch the audio for Dual Group B between output C
or D.
TV Wall mode:
1) Press the 'MATRIX/DUAL/WALL' button to switch to the TV Wall
mode. The LED will blink constantly while in this mode.
2) Press input 1/2/3/4 to select a source to output to 4 displays
(e.g. a 2 by 2 Video Wall).
3) The audio will be on output A only.
6MATRIX/DUAL/WALL: Press to switch between Matrix mode, Dual
mode and TV Wall mode. When in Matrix mode the LED will be lit
constantly, when in DUAL mode the LED will not be lit and when in
TV Wall mode the LED will blink.
7LOCK: Press once to lock the keypad and remote control, press
and hold for 3 seconds to release the lock function.
8SAVE: Save the customized input and output settings.
1) Press 'Matrix/Dual/Wall' button to select the desired mode.
2) Press each output channel A/B/C/D and then press
corresponding input channel 1/2/3/4 as required.
3) Press 'SAVE', the input 1/2/3/4 LEDs will light at the same time,
then press one of the input 1, 2, 3 or 4 buttons to save the settings
to the system memory.
For example, select Matrix mode, press output A then press input
4, then press 'SAVE'. This will correspond to the remote control
FAV.1 to FAV.4 buttons.
9RECALL: When in Matrix, Dual or Wall mode, press the 'RECALL'
button, the input channel 1/2/3/4 LEDs will light at the same time.
Select by pressing input channel 1, 2, 3 or 4 (or FAV1 to FAV4 on
the remote control) to recall the customized screen settings.
5
6.2 Rear Panel
4321 DCBACONTROL
RS232 DC 12V
USB
SERVICE
ONLY
HDMI IN HDMI OUT
1 2 3 4 5 6
1HDMI IN 1/2/3/4: Connect to HDMI source devices such as DVD/
Blu-ray players or PCs/Laptops.
2 HDMI OUT A/B/C/D: Connect with HDMI equipped displays such as
HDTVs/Monitors.
3CONTROL: Connect to an active network for telnet control (Please
refer to Section 6.6 for RS-232/Telnet).
4 USB SERVICE ONLY: Reserved for manufacturer use only.
5RS-232: Connect to a PC/Laptop or RS-232 control system with a
D-Sub 15pin cable to control the device with RS-232 commands
(Please refer to Section 6.6 for RS-232/Telnet).
6DC 12V: Connect the 12V DC power supply to the unit and plug
the adaptor into an AC outlet.
Other manuals for CDPS-44SM
2
Table of contents
Other CYP Matrix Switcher manuals
CYP
CYP CPLUS-V4H2HA User manual
CYP
CYP CPLUS-V8H8HP User manual
CYP
CYP PUV-1082PL-4K22 User manual
CYP
CYP CPLUS-1082VA User manual
CYP
CYP CMSI-4H4CV User manual
CYP
CYP PUV-44XPL-4K22-KIT User manual
CYP
CYP CMSI-1616 User manual
CYP
CYP OR-42UHD User manual
CYP
CYP CMPRO-UA8H8CVE User manual
CYP
CYP OR-HD42S User manual
