CYP CMPRO-4H4H User manual
CMPRO-4H4H/4H2H
4 by 4/4 by 2 HDMI Matrix
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version VR1.0 September 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 03/09/12 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................3
6.3 Remote Control................................4
6.4 D-Sub 9 Pin Denitions .....................5
6.5 RS-232 Protocols ...............................6
7. Connection Diagram ............................ 7
8. Specications ........................................ 8
9. Acronyms ............................................... 9
1
1. INTRODUCTION
The 4 by 4/4 by 2 HDMI matrix with 4kx2k supported which allows HDMI
signal from any of its four sources to be routed to and displayed on
any of its four/two connected HDMI displays simultaneously. It supports
3D, 3Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio and
other features dened by HDMI specications. The management
of source/ sink scenarios can be operated easily through on-panel
buttons, IR remote control, RS-232 or Ethernet controls.
2. APPLICATIONS
• Showroom display control
• Educational demo
• Installation usage
• Advertising display
3. PACKAGE CONTENTS
• 4x4 / 4x2 HDMI Matrix
• Remote Control (CR-33)
• Power Adaptor
• Operational Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as Blu-ray/DVD players with 3D/4kx2k
contents, output display HD TV/monitor with 3D/4kx2k functions and
HDMI high standard cables.
5. FEATURES
• Support HDTV resolutions up to 4Kx2K
• Supports 7.1CH of LPCM, Dolby TrueHD, and DTS-HD Master Audio
• Supports Deep Color up to 1080p 48-bit
• Supports Internal/External EDID
• Supports IR, RS-232 and Ethernet controls
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER EDID A B C D 1234
A
B
C
D
CMPRO-4H4H 4X4 HDMI MATRIX
1 2 3 4 5 6 7
1IR
IR receiver window accepts the remote control signal of this
device.
2POWER & LED
Press this button to power the device on/off. The LED will illuminate
when the power is on.
3EDID & LED
Press this button to use the internal/STD or external/TV EDID. The
LED will illuminate when STD EDID is selected. STD EDID video up to
1080p@24/50/60 and audio up to LPCM 2CH at 192kHz & 36bit.
4OUTPUT A
Press this button to select input source for output A, the LED will
illuminate accordingly to the selection.
5OUTPUT B
Press this button to select input source for output B, the LED will
illuminate accordingly to the selection.
6OUTPUT C
Press this button to select input source for output C, the LED will
illuminate accordingly to the selection.
7OUTPUT D
Press this button to select input source for output D, the LED will
illuminate accordingly to the selection.
3
6.2 Rear Panel
1234
INPUT OUTPUT
A B C D RS232IR IN ETHERNET
SERVICE
DC 5V
POWER
1 2 3 4 5 6 7
1INPUT 1~4
Connect input source equipments such as DVD/Blu-ray players
with HDMI cables.
2OUTPUT A~D
Connect to HDMI 3D TV/display or monitor for both audio and
video or moving/static graphic play.
3IR IN
Connect the supplied IR extender (included in the package) or IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR extender.
4RS-232
Connect to a PC or laptop with D-Sub 9-pin male cable for the
transmission of RS-232 commands.
5CONTROL
Connect to an internet or network activate device. The green LED
will illuminate up on connection and the yellow LED will blink during
data transmission.
6SERVICE
Reserved for factory using only.
7POWER DC 5V
Connect the 5V DC power supply included in the package to an
AC wall outlet.
4
6.3 Remote Control
1POWER
Press this button to switch on
or set to standby mode of the
device.
2OUTPUT A 1~4
Press buttons 1~4 to selection
the nominated input for output
A.
3OUTPUT B 1~4
Press buttons 1~4 to selection
the nominated input for output
B.
4OUTPUT C 1~4
Press buttons 1~4 to selection
the nominated input for output
C.
5OUTPUT D 1~4
Press buttons 1~4 to selection the nominated input for output D.
OUTPUT
A
OUTPUT
D
OUTPUT
C
OUTPUT
B
POWER
CR-33
1
2
3
4
5
5
6.4 D-Sub 9 Pin Denitions
CMPRO-4H4H/4H2H Remote Control
PIN Assignment PIN Assignment
1 NC 1 NC
2 TX 2 RX
3 RX 3 TX
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19200bps
Data Bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
Other manuals for CMPRO-4H4H
2
This manual suits for next models
1
Table of contents
Other CYP Matrix Switcher manuals
CYP
CYP CMSI-88 User manual
CYP
CYP PUV-1082-4K22 User manual
CYP
CYP CDPS-UA6H2HFS User manual
CYP
CYP OR-HD42S User manual
CYP
CYP OR-42CD-4K22 User manual
CYP
CYP CPLUS-1082CVAL User manual
CYP
CYP PU-424HBTL-KIT User manual
CYP
CYP CMSI-8H8HC User manual
CYP
CYP PU-8H8HBTPL User manual
CYP
CYP PUV-44XPL-AVLC User manual
CYP
CYP PU-8H8HBTPL-4K User manual
CYP
CYP PUV-1082-PRO User manual
CYP
CYP PU-8H8HBTPL-4K22 User manual
CYP
CYP SM-4X4-HDMI-LC User manual
CYP
CYP HDBT PU-4H4HBTE-4K User manual
CYP
CYP CPLUS-662CVEA User manual
CYP
CYP PUV-1082-4K22N User manual
CYP
CYP CMSDI-164 User manual
CYP
CYP EL-41S-4K User manual
CYP
CYP nT17BX19 User manual
