CYP OR-44VWC User manual
OR-44VWC
4x4 Video Wall Control Matrix
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 18/11/2013 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel...................................................10
6.3 Remote Control........................................11
6.4 Remote Control Dip Switch .................12
6.5 RS-232 Protocols......................................12
6.6 RS-232 & Telnet Commands.................13
6.7 RS-232 & Telnet Control.........................17
6.8 Telnet Setting............................................18
6.9 OSD MENU .................................................18
7. Connection Diagram .......................... 23
8. Specications...................................... 24
8.1 Technical Specications ........................24
8.2 Input Support Timing ............................25
8.3 Output Support Timing.........................26
9. Acronyms............................................. 26
6
1. INTRODUCTION
The OR-44VWC is an advanced HDMI seamless matrix switcher that can be easily
congured and controlled for three dierent output modes (Matrix, Dual, and
Video Wall) for a variety of install applications. Matrix mode routes the source
signals to output displays as a regular matrix does, allowing the user to send any
source content to any screen independently.
Dual mode allows 2 sets of 2 selected sources to be shown on designated output
displays (2 displays as a set) on POP (Picture on Picture) display.
Video Wall mode extends a selected source to all 4 output displays as one. This
solution supports full range of video resolutions up to WUXGA@60 (RB) or 1080p,
and audio formats up to 7.1CH LPCM at 192 kHz sampling rate. Control is via IR,
remote control, Telnet (IP), RS-232 or front panel buttons.
2. APPLICATIONS
Broadcasting control room
Surveillance control room
Public advertisement displays
HDMI Input extending
Video Wall Systems
3. PACKAGE CONTENTS
1× 4 by 4 HDMI Seamless Matrix Switcher
1× Remote Control (CR-125)
Software CD Driver (Optional)
1×12V/3A DC Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as DVD/Blu-ray players or any video signal
and PC/Notebook devices and output HD TV/monitor.
7
5. FEATURES
Seamlessly switches any input signal to any output display, supporting
full HDMI Matrix functionalities
Supports 8/10/12 bit Deep Colour
Selects 2 input signals to be simultaneously displayed on 2 grouped
HDMI displays (Dual A and Dual B) featuring POP (Picture On Picture)
Displays any input signal on a 2x2 Video Wall as a full image, with Bezel
Correction
Control via IR (Remote), RS-232 or IP (Telnet), on-panel buttons or OSD
menu
8 Screen Setting Hot Keys for ease of use
Input resolution supports VGA to WUXGA (RB) or 480i to 1080p; output
resolution supports 480p to 1080p
Audio supports up to LPCM 7.1CH at 192 kHz sampling rate
Supports 2.25Gbps Frequency Clock per channel (225MHz Clock Rate)
19" Rack Mount Casing
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
-
+
1
INPUT 234SAVE RECALL
A
OUTPUT BCDLOCK
MATRIX/
DUAL/WALL
XGA
720P
MENU
21 3 4 5 9 10
87
1IR Window: Accepts the IR signal from the supplied remote control.
2Power: Press to turn the unit ON or to put it into standby mode.
Factory default: Press and hold the Power while connecting the power
supply to reset the system to the default settings.
3MENU: Press this button to bring up the On-screen Display (OSD)
menu on screen.
Press the“MENU” button simultaneously with the "−" button to
immediately switch the output resolution to 720p@60Hz.
Press the“MENU” button with simultaneously “+” button to
immediately switch the output resolution to XGA (1024×768@60 Hz).
4−/+ Buttons: Press these buttons to navigate down/up the OSD then
press the “MENU” button to conrm.
5CHANNEL INPUT 1~4 and CHANNEL OUTPUT A~D:
Matrix mode:
i. Press the“Matrix/Dual/Wall”button to switch to Matrix mode. The
LED will stay lit when in this mode.
ii.Press an output from A~D and then press the corresponding input
(from 1~4). For example: press output A then press input 1, output
A will switch to input 1 and display the signal. The setting for each
output must be set individually.
Dual mode: Combines 2 sources to be presented on each of the HDMI
outputs (Dual A and Dual B).
i. Press “Matrix/Dual/Wall”button to switch to Dual mode. The LED will
turn o when in this mode.
ii.Press the "A" or "B" output buttons and then press the required
input (1 or 2). For example: press the output "A" button then press
the input 1 button, output A will display the video from input 1 on
the left side of the screen, then press the output "B" button and
9
then press the button for input 2, output "A" will display the video
from input 2 on the right side of the screen. The video image will be
identical for both output A and B.
iii.Dual Group A are outputs A and B combined, Dual group B are
outputs C and D combined. Each group will output the same image
simultaneously.
iv.Press button A or B for 3 seconds to switch the audio for Dual Group
A between output A or B.
v.Press button C or D for 3 seconds to switch the audio for Dual Group
B between output C or D.
TV Wall mode:
i. Press the “Matrix/Dual/Wall”button to switch to the TV Wall mode.
The LED will blink constantly while in this mode.
ii.Press input 1~4 to select a source to output to 4 displays (e.g. a 2 by
2 Video wall). The audio will be on output A only.
6MATRIX/DUAL/WALL: Press to switch between Matrix mode, Dual
mode and TV Wall mode. When in Matrix mode the LED will be lit
constantly, when in DUAL mode the LED will not be lit and when in TV
Wall mode the LED will blink.
7LOCK: Press once to lock the keypad and remote control, press and
hold for 3 seconds to release the lock function.
8SAVE: To save the customized input and output settings.
– Press“Matrix/Dual/Wall” button to select the desired mode.
– Press each output channel A~D and then press corresponding input
channel 1~4 as required.
– Press“SAVE”, the input 1~4 LEDs will light at the same time, then
press one of the input 1,2,3 or 4 buttons to save the settings to the
system memory.
For example: Select Matrix mode, press output A then press
input 4, then press “SAVE”. This will correspond to the remote control
FAV.1~FAV.4 buttons.
9RECALL: When in Matrix, Dual or Wall mode, press the “RECALL”
button, the input channel 1~4 LEDs will light at the same time. Select
by pressing input channel 1,2,3 or 4 (or FAV1~4 on the remote control)
to recall the customized screen settings.
10
6.2 Rear Panel
4321 DCBACONTROL
RS232 DC 12V
USB
SERVICE
ONLY
HDMI IN HDMI OUT
1 2 3 4 5 6
1HDMI IN 1~4:
Connect to HDMI source devices such as DVD/Blu-ray players or PCs/
Laptops.
2HDMI OUT 1~4:
Connect with HDMI equipped displays such as HDTVs/Monitors.
3Control:
Connect to an active network for telnet control (Please refer to Section
6.6 for RS-232/Telnet).
4USB SERVICE ONLY:
Reserved for manufacturer use only.
5RS-232:
Connect to a PC/Laptop or RS-232 control system with a D-Sub 15pin
cable to control the device with RS-232 commands (Please refer to
Section 6.6 for RS-232/Telnet).
6DC 12V:
Connect the 12V DC power supply to the unit and plug the adaptor
into an AC outlet.
Table of contents
Other CYP Matrix Switcher manuals
CYP
CYP CMSI-8D8DS User manual
CYP
CYP CMPRO-U8H8CVE User manual
CYP
CYP CPLUS-V4H2HPIP User manual
CYP
CYP PU-8H8HBTPL-4K User manual
CYP
CYP CMPRO-U4H4CVE User manual
CYP
CYP CPLUS-V8H8HP User manual
CYP
CYP CMSI-8H8HC User manual
CYP
CYP PUV-1082-PRO User manual
CYP
CYP CMSDI-1616S User manual
CYP
CYP CMSI-8H8CVL User manual
