S&H 007 R01
1. Identify the most appropriate position for the Fold Away Shower Seat ring.
Away Shower Seat in position on the wall and using the hole
using a 12mm all,
face of the wall. If fitting to a tiled surface,
crews provided through the washers and the holes of the Fold
ll before
dditional Information only be fitted to solid brick, concrete block walls or
g load for the Fold Away Shower Seat is 90kg. This load
oduct Care Advice quality finish, dry the Fold Away Shower Seat after use.
ese will damage the product.
Please retain this leaflet for future reference.
Croyd
Fitting Instruction
Fig.1 Fig.2
ensuring the product is at a comfortable height and distance for showe
2. The Fold Away Shower Seat can be folded upwards for more convenient
storage so please ensure there is sufficient space above the fixing position to
allow for this.
3. Place the Fold
centres of the wall plate as a template mark the screw fixing positions on the
wall surface. (See Fig.2)
4. Drill the holes to a depth of 65mm in the marked positions
masonry drill. (See Fig.2) If the product is to be fitted onto a ceramic tiled w
a ceramic drill bit should be used.
5. Insert the wall plugs flush to the sur
the wall plugs should be inserted below the surface of the tile to avoid
cracking.
6. Insert the s
Away Shower Seat wall plate and screw to the wall. (See Fig.1)
7. Check the Fold Away Shower Seat is securely fastened to the wa
use.
A
• This product must
similarly strong materials offering appropriate support for the maximum
safe working load.
• Maximum safe workin
must be evenly distributed.
Pr
• To retain the best
• Clean product regularly with a soft damp cloth.
• Do not use abrasive or chemical cleaners, as th
ex Limited, Central Way, ndover, Hants, SP10 5AW, UKA
Tel: +44 (0) 1264 365881. Fax: +44 (0) 1264 356437
