4
DIGITAL WATER CONTROL AT YOUR FINGERTIPS
Thermal disinfection
The pipes will flush through at
the hottest temperature your
system will allow, this will clean
through any limescale and
clear any potential bacteria.
Note: Care should be
taken through this thermal
disinfection process as the
pipes will get extremely hot and
there is a risk of scalding.
Press the control and keep
pressing until the Red light
comes on, then release.
Press the control until the
Green light appears, then
release, this will disable the
control for 45 seconds to
allow the control to be cleaned
without turning on the control.
Cleaning (safe) mode
Caution: The water is hot
during this process and there is
a risk of scalding.
The control will flash Red
during thermal disinfection
and will last for 5 minutes,
afterwards cold water is
flushed through the system.
Thermal disinfection can
be stopped at any time by
pressing the control.
Maximum run time
This feature allows you to switch
the unit o from 5 seconds to
30 minutes.
Hygiene function
This feature is used for setting
up the shower to turn on and
regularly flush the system
through. Please see the chart on
the next page.
Ambient light
This feature allows you to have
an ambient light on the controller
when not in use; you can choose
your own colour or even have a
mixture of dierent colours.
Extra functions explained
