cromax A104 User manual
A104 L2 Service Manual
1. Technical Specifications
Particular
Remarks
Key Matrix For Flashing
NA
Chipset
MT6571A/E
Android Version
Android 4.4.2
Frequency
1.3Ghz
Network Mode
GSM900/1800
ROM
4G
RAM
512M
Internal SD Card memory
TBD
Expandable Memory
TBD
Factory mode code
*#*#3646633#*#*
A104 L2 Service Manual
2. CAUTIONS
I. Flashing & Servicing must be undertaken by qualified personnel only.
II. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn.
III. Use only approved Tools & components as specified in the parts list.
IV. Ensure all components, modules, screws, and insulators are correctly re-fitted after servicing and alignment.
V. Ensure all cables and wires are repositioned correctly if Handset disassembled.
VI. Electrostatic discharge can easily damage the sensitive components of electronic products. Therefore, Service
Centre must adhere the precautions which mentioned above.
3. L2 Level Trouble Shooting
1) Doesn’t Power On
NO.
Description
Reason
Solution
1
Doesn’t Power On
Sidekey FPC is badly soldered
Re-solder sidekey FPC.
Sidekey is broken
Change a new sidekey
MB is broken
Refer to L3 service manual
Check whether the
sidekey is broken or
badly soldered.
A104 L2 Service Manual
2) LCD
NO.
Description
Reason
Solution
1
LCD segments missing, Fading,
Contrast issue, Black lines, Color
issue, Backlight issue, Blank display,
Bad pixel, Flickering.
LCD FPC isn’t assemble in
place
Reassemble LCD FPC
LCD FPC is broken
Change the LCD
MB is broken
Refer to L3 service manual
Software
RE-upgrade software
2
LCD’s surface is broken
LCD is scratched
Change the LCD
LCD is broken
Change the LCD
A104 L2 Service Manual
3) LCD Display Issue
NO.
Description
Reason
Solution
1
LCD doesn’t display
LCD issue
Change LCD
MB doesn’t working
Refer to L3 service manual
4) Touchpad
NO.
Description
Reason
Solution
1
TP doesn’t work and the light
sense is not well.
FPC isn’t assembled in place
Reassemble the FPC
FPC is broken
Change the TP
MB is broken
Refer to L3 service manual
Light sense is not well
Change the TP
2
TP Mechanically broken
TP is scratched
Change the TP
TP is broken
Change the TP
A104 L2 Service Manual
Take off the TP, and then check and test if it is working normally use the jig and fixture.
Test the mainboard if it is OK by the PCBA jig and fixture.
5) Light Sense
NO.
Description
Reason
Solution
1
Light sense is not well
MB is broken
Refer to L3 service manual
Light sense is not well
Change the TP
TP is broken
Change the TP
A104 L2 Service Manual
6) G-sensor
NO.
Description
Reason
Solution
1
G-sensor doesn’t work
MB is broken
Refer to L3 service manual
A104 L2 Service Manual
7) Keypad
NO.
Description
Reason
Solution
1
No responding to keypad
Keypad FPC is not well
Re-solder
Touching is not well
Change the side key FPC
A104 L2 Service Manual
8) Charging
NO.
Description
Reason
Solution
1
No charging
Data cable issue
Change the data cable
I/O connector
Change the I/O connector
Charger issue
Change the charger
CPU
Refer to L3 service manual
2
Charging slow
Data cable issue
Change the data cable
I/O connector
Change the I/O connector
CPU
<VCHG is poor soldering>
Refer to L3 service manual
A104 L2 Service Manual
9) USB
NO.
Description
Reason
Solution
1
No charging
Data cable issue
Change the data cable
I/O connector
Change the I/O connector
Charger issue
Change the charger
CPU
Refer to L3 service manual
2
Cannot use DATA
D+ or D- is broken
Change the data cable
A104 L2 Service Manual
10) Main Camera
NO.
Description
Reason
Solution
1
Camera not ready/not
working/no function
Connection issue
Re-connecting
Camera issue
Change the camera
CPU
Refer to L3 service manual
2
Front camera can’t open
Camera issue
Change the front camera
3
Rear camera can’t open
Camera issue
Change the front camera
4
Bad image
Assemble issue
Reassemble the camera
Camera issue
Change the camera
CPU
Refer to L3 service manual
Rear camera
Front camera
Other cromax Cell Phone manuals
