Crivit 89267 User manual

AIR CUSHIONED BIKE SADDLE

LUFTPOLSTERSATTEL

Montageanleitung

SIODEŁKO

Z PODUSZKĄ

POWIETRZNĄ

Instrukcja montażu

LÉGPÁRNÁS

KERÉKPÁRNYEREG

Szerelési utasítás

KOLESARSKI

SEDEŽ Z ZRAČNO

BLAZINO

Navodilo za montažo

AIR CUSHIONED

BIKE SADDLE

Assembly instructions

SEDLO NA KOLO

Návod k montáži NAFUKOVACIE

POLSTROVANÉ

SEDLO

Návod na montáž

IAN 89267

2 GB

Table of Contents

Intended use .........................................................3

Safety instructions .......................................... 4 - 5

Risk of injury ............................................... 4 - 5

Avoidance of material damage .....................5

Assembly ........................................................ 6 - 7

Inﬂating .................................................................8

Deﬂating ...............................................................8

Care, storage .......................................................9

Disposal ................................................................9

3-year warranty ............................................9 - 11

3GB

Congratulations on purchasing this

high-quality product. Be sure to familiari-

se yourself with the assembly instructions prior

to use. Please take the time to carefully read

through the following assembly instructions and

safety notes. Only use the product as described

and for the intended use. Please retain these

instructions for future reference and ensure that

they are passed on to any third party.

Intended use

The item is a seat for bicycles for private use and

is not intended for commercial use.

Safety instructions

Risk of injury!

- Assemble the item correctly and ensure that it

cannot slip when riding. Do not adjust the item

while riding.

- Quick releases must lie on the dropouts in a

closed state. Adjust the quick release so that

you feel some resistance when it is in a 90°

position and pull it tight. If necessary, consult

your specialist dealer.

- Check the item before each use for damage

and wear-and-tear. Check that all screws are

tight before each use and if necessary, tighten

screw connections again. The item may only

be used if it is in ﬂawless condition!

- If using a child seat, ensure that all spring

washers under the saddle are covered in order

to prevent the pinching of ﬁngers.

5GB

- Every type of tear or scratch in the areas of the

saddle subject to high stress (screw connections)

is an indication that the life-span of that part has

expired and the part must be replaced.

Avoidance of material damage

Ensure that the item does not come in contact with

sharp objects. Protect the item from extreme wea-

ther inﬂuences such as cold, wetness and direct

exposure to the sun.

6 GB

Assembly

Always adjust the saddle to the ap-

propriate height for you. Observe the

marking on the seat post, which marks

the minimum insertion depth. The item’s

fastening screw must be tightened with

24 Newton metres on both sides in or-

der to be securely fastened to the plug

seat post.

(Fig. A) Adjust the item horizontally.

(Fig. B) For plug seat posts: Fasten the saddle

with the pre-mounted block to the plug seat post.

(Fig. C)

1. Remove the fastening screws (a) on both sides

with 13’ open-end wrench. Remove the distance

piece (b), the screw (d), as well as the block (c).

2. Subsequently, mount the saddle directly to the

patent saddle post.

7GB

B C

a – Fastening screw

b – Distance piece

c – Block

d – Screw

Inﬂating

Push the inﬂation button (1) until you have achie-

ved the desired degree of hardness (Fig. D).

Standard values:

• Soft – pump 3 x

• Medium – pump 5 x

• Hard – pump 10 x

Deﬂating

Press the air valve (2).

Care, storage

Also, store the item in a clean dry place at room

temperature.

Important! Only clean with a damp

cleaning cloth and thereafter, wipe dry.

Disposal

Please dispose of the product and packaging in

an environmentally friendly manner, separating

diﬀerent materials for recycling as required!

Dispose of this item through an authorised

disposal company or through your local waste

disposal facilities - ask your local authority for

information if further guidance is required.

Ensure that you comply with all regulations

currently in force.

3-year warranty

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not aﬀected by this

warranty.

With regard to complaints, please contact the

following service hotline or contact us by e-mail.

Our service employees will advise as to the

subsequent procedure as quickly as possible.

We will be personally available to discuss the

situation with you.

Any repairs under the warranty, statutory gua-

rantees or through goodwill do not extend the

warranty period. This also applies to replaced

and repaired parts. Repairs after the warranty

are subject to a charge.

Other manuals for 89267

Table of contents

Languages:

Popular Bicycle Accessories manuals by other brands

Sigma

Sigma BC 16.16 manual

Playcore

Playcore Dero Setbacks installation instructions

VDO Cyclecomputing

VDO Cyclecomputing x3dw instruction manual

Cateye

Cateye RAPID X2 manual

buratti meccanica

buratti meccanica Clorofilla Trail Use and maintenance manual

Shimano

Shimano SG-8R20 Service instructions

BOB

BOB YAK owner's manual

APLIC

APLIC 303303/20190717TW012 user manual

SRAM

SRAM AXS BlipBox user manual

Garmin

Garmin EDGE 500 owner's manual

Shimano

Shimano FD-RX810 Dealer's manual

Cateye

Cateye V2C - Quick start manual

KMART

KMART 43115907 instructions

SIGMA SPORT

SIGMA SPORT Buster 2000 manual

NVO Components

NVO Components STEM manual

DAXYS

DAXYS BP188 user manual

XLC

XLC BV-W17 manual

Deda Elementi

Deda Elementi SUPERBOX user manual