Crestron MMK-V15 User manual

Crestron MMK-V15 & WMKM-V15

Mud Mount Kits

Installation Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

Industry Compliance

As of the date of manufacture, the MMK-V15 & WMKM-V15 have been tested and found to comply with

specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.

All brand names, product names and trademarks are the property of their respective owners.

Crestron MMK-V15 & WMKM-V15 Mud Mount Kits

Contents

Mud Mount Kits: MMK-V15 & WMKM-V15 1

Description.................................................................................................................................1

Setup ..........................................................................................................................................5

Supplied Hardware ......................................................................................................5

Installation...................................................................................................................5

Resources.................................................................................................................................14

Reference Documents................................................................................................14

Further Inquiries ........................................................................................................ 14

Future Updates .......................................................................................................... 14

Return and Warranty Policies ..................................................................................................15

Merchandise Returns / Repair Service ...................................................................... 15

CRESTRON Limited Warranty.................................................................................15

Installation Guide – DOC. 6885A Contents •i

Crestron MMK-V15 & WMKM-V15 Mud Mount Kits

Mud Mount Kits: MMK-V15 &

WMKM-V15

Description

Mud Mount Kits are the preferred mounting options for the Crestron V15-WALL

V-Panel 15” Wall Mount Touchpanel display when the cutout made in the drywall

for touchpanel installation is too large. It is also compatible with the WMKC-V15

V-Panel Wall Mount Conversion Kit. These kits provide support for additional

plastering that can be applied to hide large irregularities in the touchpanel cutout.

NOTE: If mounting into a material other than drywall (e.g., wood lectern, concrete

or rock) use the cutout template, available in the post-construction kit WMKM-V15.

For concrete and rock mounting material, allow for proper ventilation before

mounting the touchpanel.

There are two Mud Mount Kits. The MMK-V15 mud ring is an optional accessory

for the BB-V15 back box and PMK-V15 pre-construction mounting kit.

Pre-construction refers to framed walls prior to hanging drywall. It is designed to

compensate for drywall cutout imperfections, providing a grated surface suitable for

the application of drywall compound for a finished appearance.

The WMKM-V15 mounting kit provides a quick solution for installing a

V15-WALL V-Panel 15” Wall Mount Touchpanel display in an existing wall or

similar flat surface (e.g., lectern or podium). The WMKM-V15 is designed with a

mounting plate so that it can be mounted without the support of a stud. It is also

compatible with the WMKC-V15 Wall Mount Conversion Kit. Designed for

post-construction applications, the WMKM-V15 includes a MMK-V15 mud ring to

compensate for drywall cutout imperfections.

NOTE: The WMMK-V15 mounting kit requires at least a 17 inch (432 mm) wide

space behind the mounting surface.

NOTE: If necessary, consult the latest revision of the V15-WALL and WMKC-V15

Installation Guide (Doc. 6884) for a complete list of mounting options. This

document is available from the Crestron website (www.crestron.com/manuals).

Installation Guide – DOC. 6885A Mud Mount Kits: MMK-V15 & WMKM-V15 •1

Mud Mount Kits Crestron MMK-V15 & WMKM-V15

The dimensions of the MMK-V15 and WMKM-V15 are shown below.

Overall Dimensions (Mud Ring Plate)

17.22 in

(438 mm)

12.94 in

(329 mm)

2.26 in

(58 mm)

0.50 in

(13 mm)

0.05 in

(2 mm)

Overall Dimensions (Adjustment Plate)

0.38 in

(10 mm)

5.90 in

(150 mm)

2 •Mud Mount Kits: MMK-V15 & WMKM-V15 Installation Guide – DOC. 6885A

Crestron MMK-V15 & WMKM-V15 Mud Mount Kits

Overall Dimensions (Mounting Plate)

11.74 in

(299 mm)

17.00 in

(432 mm)

15.00 in

(381 mm)

7.50 in

(191 mm)

13.00 in

(331 mm)

Installation Guide – DOC. 6885A Mud Mount Kits: MMK-V15 & WMKM-V15 •3

Mud Mount Kits Crestron MMK-V15 & WMKM-V15

Overall Dimensions (Cutout Template)

1/4 in

(6 mm) 1/4 in

(6 mm)

11 9/16 in

(294 mm)

12 in max

(306 mm max)

7 3/8 in

(188 mm) 9/16 in

(14 mm)

14 13/16 in

(376 mm)

15 7/8 in max

(404 mm max)

Ø 1/4 in

(6.5 mm) TYP.

4 •Mud Mount Kits: MMK-V15 & WMKM-V15 Installation Guide – DOC. 6885A

Crestron MMK-V15 & WMKM-V15 Mud Mount Kits

Setup

Supplied Hardware

The MMK-V15 consists of three parts. These parts produce an assembly that

attaches to the BB-V15 or PMK-V15. The WMKM-V15 consists of six parts, three

of which make up the MMK-V15, as well as a mounting plate, cutout template and

mounting screws.

The mounting plate provides the necessary support for a touchpanel in an existing

wall or similar flat surface (e.g., lectern or podium) which can have joint compound

applied to it. An overlay cutout template (4508473) is supplied and is in the shape of

the required opening (refer to the illustration on page 4).

The hardware supplied with the MMK-V15 and WMKM-V15 is listed in the

following table.

Supplied Hardware for the MMK-V15 and WMKM-V15

DESCRIPTION PART NUMBER QUANTITY

Metal, Bracket, Mud Ring 2025107 1

Metal Plate, Adjustment 2004825 2

Hardware, Metal, Push-On Fasteners 2004121 4

Metal, Plate, Mounting

(WMKM-V15 only) 2024038 1

Overlay, Template, Wall Cutout

(WMKM-V15 only) 4508473 1

Screw, #06-32 x 1 1/2”, Pan, Phil:

(WMKM-V15 only) 2007254 6

Installation

This section provides an installation procedure for each Mud Mount Kit. The

“MMK-V15 Procedure” starts below and the “WMKM-V15 Procedure” starts on

page 9. Be sure to review each procedure before starting.

MMK-V15 Procedure

This section provides the necessary steps for the assembly of the MMK-V15 with

either the BB-V15 or PMK-V15. It is assumed that the BB-V15 or PMK-V15 has

been secured to the stud according to the instructions in the latest revisions of their

Installation Guides (Doc. 6801 and Doc. 6802 respectively). It is also assumed that

drywall is in place and a cutout is made in the drywall along the inside of the

mounting plate for touchpanel installation.

Complete the steps in the order provided. The only tools or materials required and

not supplied are four standard drywall screws, #2 Phillips screwdriver, a level and

tools/material to apply drywall joint compound.

CAUTION: Allow an air gap of at least 12 inches (305 mm) in the wall cavity

above and below the touchpanel for heat dissipation.

Installation Guide – DOC. 6885A Mud Mount Kits: MMK-V15 & WMKM-V15 •5

Mud Mount Kits Crestron MMK-V15 & WMKM-V15

NOTE: The MMK-V15 has been optimized for mounting in 5/8” (15 mm) drywall.

You may use 1/2” – 1” (12.5 – 25 mm) without issue. Thinner or thicker drywall will

cause issues with the installation.

NOTE: The illustrations in this procedure show the installation of the MMK-V15

with the PMK-V15. Even though the illustrations only show the PMK-V15, the

procedure is identical for the BB-V15.

1. Pass an adjustment plate through the opening and align its two center holes

with the top two pins on the PMK-V15 (or BB-V15). Verify that the pins on

the adjustment plate are not between (facing) the adjustment plate and the

PMK-V15 (or BB-V15). Refer to the illustration below for visual guidance.

Secure Adjustment Plates to PMK-V15 (or BB-V15)

PMK-V15

(2024092)

PUSH-ON FASTENER (4)

(2004121)

ADJUSTMENT PLATE (2)

(2004825)

2. Slide a push-on fastener over each pin of the PMK-V15 (or BB-V15) to

loosely secure the adjustment plate and the mounting plate. Do not push the

push-on fasteners all the way down onto the pins. Slide them on enough to

keep the adjustment plate and mounting plate as one adjustment/mounting

plate assembly.

6 •Mud Mount Kits: MMK-V15 & WMKM-V15 Installation Guide – DOC. 6885A

This manual suits for next models

Table of contents

Other Crestron Rack & Stand manuals

Crestron

Crestron PMK-6X-DSW User manual

Crestron

Crestron CPC-CMT How to use

Crestron

Crestron MK-IM-RX User manual

Crestron

Crestron RMK-3U User manual

Crestron

Crestron TSD-2020-WMK-BB User manual

Crestron

Crestron RMK-1600 User manual

Crestron

Crestron HBK-3000 User manual

Crestron

Crestron RMK-1500 User manual

Crestron

Crestron CSA-DECOR3-BRKT-163-EC-MTL User manual

Crestron

Crestron CCS-UC-200-WSTND User manual

Crestron

Crestron RMK-AMP-X User manual

Crestron

Crestron PMK-3100L User manual

Crestron

Crestron TMK-4L User manual

Crestron

Crestron TMK-12L User manual

Crestron

Crestron C2N-CAMIDSPT User manual

Crestron

Crestron TSW-770-MSMK-ANG User manual

Crestron

Crestron MMK-V12 User manual

Crestron

Crestron CPC-TMT How to use

Crestron

Crestron TSW-UMB-PMK User manual

Crestron

Crestron RMK-15L User manual

Crestron

Crestron CNWMBG2-34A User manual

Crestron

Crestron RMK-TPS3000L User manual

Crestron

Crestron WMKB-1000L User manual

Crestron

Crestron MMK-3000L User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 