Cradlepoint DSPMOD-CP-S User manual
DSPMOD-CP-S/CDMA & DSPMOD-CP/CDMA
External CDMA Modem Kit
-2-
This page intentionally left blank.
-3-
Table of Contents
Product Registration Information ...................................................................................... 4
DISCLAIMER ........................................................................................................................ 4
Document Purpose / Intended Users................................................................................. 4
Application........................................................................................................................... 4
Safety Guidelines ................................................................................................................ 4
Product Introduction .......................................................................................................... 5
CradlePoint IBR650E Hardware Overview ....................................................................... 6
Mounting Bracket ................................................................................................................ 8
Attaching the IBR650 to the Mounting Bracket ................................................................ 9
Removing the IBR650 from the Mounting Bracket......................................................... 10
Basic Setup ........................................................................................................................ 10
Modem Activation.............................................................................................................. 12
CradlePoint IBR650E Setup Instructions for Verizon Wireless DSP Deployments..... 12
Step 1 - Getting the modem ready for OTASP (Over the air service provisioning) ...... 12
Step 2: Activating the CradlePoint IBR650E on the Verizon Wireless Network: ........ 13
Step 3: Configuring your modem for port forwarding .................................................. 15
Port Forwarding................................................................................................................. 15
LAN Settings ...................................................................................................................... 16
Additional Features ........................................................................................................... 17
Dual LAN ............................................................................................................................ 18
Step 4: Connecting the modem to the repeater.............................................................. 18
Functionality Test .............................................................................................................. 21
Additional Tips................................................................................................................... 21
Warranty ............................................................................................................................. 25
Application
This guide should be applied whenever a need exists to activate and/or add a wireless modem capability to
Digital Repeater in an existing system or when this capability is being included with a new installation.
Safety Guidelines
The general safety information in this guideline applies to both operating and service personnel. Failure to
comply with these precautions violates safety standards of design, manufacture, and intended use of equip-
ment. Cellular Specialties, Inc. assumes no liability for the customer’s failure to comply with these require-
ments:
Grounding
The External Modem Kit in conjunction with the Digital Repeater system is designed to use 110 VAC and
should always be operated with the ground wire properly connected. Do not remove or otherwise alter the
grounding lug on any power cord.
Explosive Atmospheres
To avoid explosion or fire, do not operate modem and repeater in the presence of flammable gases or fumes.
Lightning Danger
Do not install or make adjustments to the modem or repeater during an electrical storm. Use of a suitable
lightning arrester, such as CSI’s model number CSI-CAP, is very strongly recommended.
If you suspect a malfunction with this product, call your dealer or the Cellular Specialties Support Line at:
(603) 626-6677, Toll Free (USA) 1-877-844-4274.
If applicable the ESN number may be found on the label on the bottom of the router. Note ESN
number below. If not yet activated, the ESN number will be required to do so. Retain this manual,
along with proof of purchase, to serve as a permanent record of your purchase.
MODEL NUMBER ESN NUMBER DATE OF PURCHASE
POINT OF SALE COMPANY
Product Registration Information
All information and statements contained herein are accurate to the best of the knowledge of Cellular Specialties,
Inc. (CSI), but Cellular Specialties makes no warranty with respect there to, including without limitation any results
that may be obtained from the products described herein or the infringement by such products of any proprietary
rights of any persons. Use or application of such information or statements is at the users sole risk, without any
liability on the part of Cellular Specialties, Inc. Nothing herein shall be construed as licence or recommendation for
use, which infringes upon any proprietary rights of any person. Product material and specifications are subject to
change without notice. Cellular Specialties’ standard terms of sale and the specific terms of any particular sale apply.
Document Purpose / Intended Users
The purpose of this document is to provide a basic procedure to help the technician/engineer install the CSI External
Modem Kit for use with CSI’s Digital Repeaters. Following the procedures outlined will minimize risks associated with
modifying a live system and preclude service interruptions. This document assumes the technician/engineer un-
derstands the basic principles and functionality involved with repeater and in-building systems. When required, see
the Modem Activation Process Section, found later in this manual, for modem activation and activation verification.
-4-
DISCLAIMER
Product Introduction
This document describes the CradlePoint IBR650E Setup Instructions for Verizon Wireless DSP Deployments.
Prior to Installation
Verify all the required components from the lists above are on hand prior to starting the installation process.
If you are missing parts contact Cellular Specialties, Inc. 670 N. Commercial St. Manchester NH 03101, Tel:
603-626-6677, Toll Free (USA): 877-844-4274, Fax: 603-626-6042 as soon as possible.
CSI CDMA External Modem Kit for Use With Digital Repeater Installations
Warning: CSI digital repeaters, with software version 2.3.1 or higher are designed to support
the integration of the CSI CDMA External Modem Kits. Check your repeater’s Status Page for software
version and contact CSI if you need an update. See Repeater Login Section for information on how to get to
the System Status Page to verify your software version.
Adding one of the CDMA external modem kits to a CSI digital repeater installation is simple and straight
forward. The kits contain the following items:
DSPMOD-CP-S/CDMA
1. (1) 375-1014-001 - Modem
2. (1) 375-1013-001 - 5 port Ethernet Switch
3. (1) 960-1047-003 - CSI Installation Manual
4. (1) CS54-3506-47 - N Type Male to N Type Male 1’ RF jumper
5. (1) 820-2028-001 - 3’ N Male to SMA Male Jumper
6. (1) CS05-102-429 - 10dB Directional Coupler
7. (1) 820-2122-014 - 14’ Ethernet Cable
8. (2) 820-2122-001 - 7’ Ethernet Cable
DSPMOD-CP/CDMA
1. (1) 375-1014-001 - Modem
2. (1) 960-1047-003 - CSI Installation Manual
3. (1) CS54-3506-47 - N Type Male to N Type Male 1’ RF jumper
4. (1) 820-2028-001 - 3’ N Male to SMA Male Jumper
5. (1) CS05-102-429 - 10dB Directional Coupler
6. (1) 820-2122-014 - 14’ Ethernet Cable
-5-
-6-
CradlePoint IBR650E Hardware Overview
Ports, LED’s and Switches
Reset: You can return your router to factory default settings by pressing and holding the Reset button. This
button is recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds
to initiate reset.
Power 12VDC: The power connector includes two pins for power and two pins for GPIO (General Purpose
Input/Output) functionality. The included power adapter, however, only connects to the power pins. You will
need a separate adapter for GPIO functionality.
Ethernet Ports: By default, the IBR650 has one WAN (Wide Area Network—your internet source) port and
one LAN (Local Area Network) port. Each of these ports can be reconfigured, however, if you need two LAN or
two WAN Ethernet ports.
Ethernet LED:
- Solid Green – connected
- Blinking Green – data transfer activity
Micro USB: This port can be used to to attach a direct, manual firmware upgrade if necessary.
-7-
Modem Antennas: The IBR650 comes with two modem antennas to enhance reception for the embedded
modem. These antennas are simple to attach and adjust. In most typical installation cases only one antenna
will be installed on the RX Diversity port.
Power On/Off:
- I = On
- O = Off
Power LED:
- Blue = On
- No light = Off
ATTN LED:
- Used with Modem LED for additional LED indications below.
Modem LED:
- Green = On and operating normally
- Blinking Green = Connecting
- Amber = Not available (idle, for example)
- Blinking Amber = Cellular data connection error
- No light = Off
Additional LED Indications:
- Factory reset button detected = ATTN and modem LED’s blink amber twice
-Error during USB firmware upgrade = ATTN and modem LED’s blink red
-8-
Mounting Bracket
-9-
Attaching the IBR650 to the Mounting Bracket
1) Attach the bracket to the wall or
other surface with screws. NOTE:
Screws are not provided because
the type of screw required depends
on the mounting surface
2) Place the router‘s edge against the
bottom of the bracket.
3) Press the router down firmly, then
push it inside the bracket. It should
latch.
-10-
Removing the IBR650 from the Mounting Bracket
From the top of the bracket, press down firmly on the router using your thumb(s) and pull the device
out.
Basic Setup
1. Attach one modem antenna to the RX Diversity Port.
This manual suits for next models
3
Table of contents
Other Cradlepoint Modem manuals
Cradlepoint
Cradlepoint CBA750 Series User manual
Cradlepoint
Cradlepoint AER3100 Series User manual
Cradlepoint
Cradlepoint AER3100 Series User manual
Cradlepoint
Cradlepoint MBR95 User manual
Cradlepoint
Cradlepoint MC100W User manual
Cradlepoint
Cradlepoint COR IBR1100 series User manual
Cradlepoint
Cradlepoint WIPIPE MC100E User manual
Cradlepoint
Cradlepoint MC400 User manual
Cradlepoint
Cradlepoint AER1600 Series User manual
Cradlepoint
Cradlepoint CBA750 Series User manual
