Cosco SX4444 User manual
TREADMILL MANUAL
SX4444
- 2 -
Thanks for buying our Fitness equipment,
Do some warm-up exercise before use, you’ll get twice the result with half the effort. Such as follows:
extend the neck up and down
twist the waist left and right
levelpushforwards upright straighten one's back
- 3 -
left and right poise exercise up and down extend exercise
thighextendexercise calfextendexercise
SAFETY GUIDELINES:
Before beginning any exercise program, you should consult with your doctor. It is recommended that you undergo a
complete physical examination. Please follow the instructions:
1. Assemble and operate the treadmill on a solid, level surface
2. Keep the area behind the treadmill clear
3. The treadmill running mat will not stop immediately if any object becomes caught in the mat or rollers-IN
EMERGENCY: Pull the safety key cord to remove safety key
4. Always check the treadmill before using it
5. Make sure all parts are assembled, nuts and bolts are tightened
6. Do not use the treadmill if the unit is disassembled in any way
7. When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on
the same circuit. Do not run the power cord underneath your treadmill. Do not operate the treadmill with a
damaged or frayed power cord.
- 4 -
8. Keep hands away from moving parts
9. Please note that there is a weight limitation for this product. If your weight more than 140kgs. It is not
recommended that you use this product. Serious injury may occur if the user weight exceeds the limit shown here.
This product is not intended to support users whose weight exceeds this limit.
10. This equipment is for home use only. Never allow more than one person on the treadmill at a time.
11. Wear appropriate exercise clothing when using the treadmill. Do not wear loose clothing that could become caught in
the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never
use the treadmill with bare feet, wearing only stockings, or in sandals. Do not wear shoes with leather soles or high
heels. Tie all long hair back
12. Do not rock the unit from side to side
13. Don’t continuously use this equipment over an hour.
14. Care should be taken when mounting and dismounting the unit
15. Do not place any liquids on any part of the treadmill
16. To prevent shock, keep all electric components, such as the motor cord and switch away from water.
17. Do not use any accessories that are not specifically recommended by the manufacturer, these might cause injuries or
cause the unit to fail
18. Work within your recommended exercise level, do NOT work to exhaustion
19. If you feel any pain or abnormal systems STOP YOUR WORKOUT IMMEDIATELY and consult your physician
immediately
20. Turn off the treadmill while adjusting or working near the rear roller.
21. Keep one side of the magnetic safe key CLIPPING your clothes during exercising to avoid danger happening.
22. Incorrect or excessive training may lead injures.
23. This equipment is not suitable for therapeutic purposes.
24. Don’t open this equipment cover to avoid damage usually.
25. Ensure the load place is level and free space at least 1m around for safe operation.
26. This equipment is not a toy. Please keep unsupervised children away from the equipment during use and
when equipment is unattended.
- 5 -
EXPLOREDRAWING
4
5
6
7
1 1
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 1
2 2
2 3
2 4
2 5
3 0
3 9
4 1
4 2
4 3
4 4
2 0
2 8
2 9
3 2
3 3
3 4
3 1
3 5
3 6
3 8
4 0
4 5
4 9
4 8
5 3
5 4
3 7
2 7
5 7
5 8
5 9
6 0
6 1
6 2 6 3
6 06 0
6 4
6 5
6 6
6 7
6 8
6 9
6 0
6 3
7 0
7 1
6 3
6 3
6 3
6 0
7 3
7 2
7 4
7 6
7 8
7 9
7 7
7 5
6 0
7 9
5 5
5 6
5 7
5 7
8 0
8 2
8 3
8 4
8 5 8 6
8 8
8 7
8 1
2 6
4 6
8
2
4 7
1 2
5 0
5 2
5 0
9
10-1
1 0 - 2
1
3
5 0
8 9
9 0
5 1
- 6 -
PART LIST
PART NO PART NAME Q'TY
1 Frame of handlebar 1
2 Frame of computer 1
3 Left upright 1
4 Right upright 1
5 Base frame 1
6 Incline frame 1
7 Running platform 1
8 Up cover of computer 1
9 Computer belly pan 1
10-1 Up cover of pulse handlebar 2
10-2 Bottom cover of pulse handlebar 2
11 Cup frame 2
12 Safety key 1
13 Tube plug of handlebar 4
14 Protective cover of left upright 1
15 Protective cover of right upright 1
16 Level frame 2
17 Rubber washer of base frame 2
18 Move wheel 2
19 Damper 1
20 Left end cap 1
21 Right end cap 1
22 Left cover of move wheel 1
23 Right cover of move wheel 1
24 Supportive wheel of running deck 2
25 Cushion of running deck 4
26 Side rail 2
27 Side rail cushion 8
28 Running deck 1
29 Running belt 1
30 Rear roller 1
31 Front roller with fly wheel 1
32 Motor belt 1
33 Motor cover 1
34 Motor 1
35 Frame of speed sensor 1
- 7 -
36 Speed sensor 1
37 Base frame of motor 1
38 Incline motor 1
39 Transformer 1
40 Control board 1
41 Plug 1
42 Power wire cushion 1
43 Fuse 1
44 Power key 1
45 Power wire 1
46 Computer control board 1
47 Connect wire of handlebar 1
48 Connect wire of upright 1
49 Connect wire of base frame 1
50 ST4.2*15 Screw 14
51 ST2.9*10 Screw 7
52 M8*20mm Allen head bolt 4
53 M8*20mm Allen head bolt 6
54 M10*50mm Allen head bolt 4
55 M10*60mm Allen head bolt 2
56 Ø10 Washer 12
57 M10 Nylon nut 8
58 ST4.8*15 Screw 10
59 M8*30mm Allen head bolt 1
60 M8 Nylon nut 7
61 M8*50mm Allen head bolt 2
62 M8*20mm Allen head bolt 2
63 Ø8 Washer 11
64 M8*45mm Allen head bolt 1
65 M8*55mm Allen head bolt 2
66 Ø8 Connect sheath 2
67 M8*25mm Allen head bolt 2
68 Ø12.5 Connect sheath 2
69 Ø10 Plastic washer 2
70 M8*40mm Allen head bolt 2
71 ST4.2*20 Screw 6
72 M8*25mm Allen head bolt 2
73 ST4.2*15 Screw 8
- 8 -
74 M8*65mm Allen head bolt 2
75 Supportive cushion of running deck 2
76 M8*85mm Allen head bolt 2
77 M8*50mm Allen head bolt 1
78 M8*20mm Allen head bolt 4
79 Ø8 Spring washer 6
80 M5*10 Bolt 2
81 Ø5 Spring washer 2
82 ST2.9*8Screw 2
83 M8*70mm Allen head bolt 1
84 M8*12mm Allen head bolt 2
85 M10*50mm Allen head bolt 1
86 Ø12 Plastic washer 2
87 M10*60mm Allen head bolt 1
88 ST4.2*12 Screw 6
89 Speaker 2
90 Fan 1
HARDWARE COMPARISON CHART
For your convenience, we have identified the hardware used in the assembly of this product. The chart
below is provided to help you to identify items that may be unfamiliar to you.
NO. DESCRIPTION Q'TY
52 M8*20mm Allen head bolt 4
53 M8*20mm Allen head bolt 6
54 M10*50mm Allen head bolt 4
55 M10*60mm Allen head bolt 2
56 Ø10 Washer 8
57 M10 Nylon nut 2
58 ST4.2*15 Screw 2
A 6mm SOCKET HEAD WRENCH 1
B 5mm SOCKET HEAD WRENCH 1
C FORK WRENCH 1
D SCREWDRIVER 1
E LUBRICANT 1
- 9 -
ASSEMBLING INSTRUCTIONS
WARNING: Please put on all the screws, washers and bolts then tighten them.
STEP1:
1. Fix the protective cover of
upright on the base frame with
ST4.2*15 Screw 58.
5 4
5 5 5 7
5 6
5 8 5 3
5 2
AB
C
D
E
58
58
14
15
- 10 -
ATTENTION: Be careful when you connect the two console-controller wires. There are pins inside
connector, the pins must be straight, and otherwise it will cause problems.
STEP2:
1. Fix the uprights on the base frame
with M10*50mm Allen head bolt 54,
M10*60mm Allen head bolt 55, Ø10
Washer 56 and M10 Nylon nut 57.
STEP3:
1. Connect the wire of upright 48 and
handlebar wire 47.
2. Fix the handlebar on the upright
with M8*20mm Allen head bolt 53.
3
4
54
55
56
57
1
5353 47
48
PIN
ENSUREPINSARESTRAIGHT
Table of contents
Other Cosco Treadmill manuals
Popular Treadmill manuals by other brands
Smooth Fitness
Smooth Fitness EVO 3i user manual
NordicTrack
NordicTrack NETL81810.0 user manual
Schwinn
Schwinn 830/Journey 8.0 Assembly manual / owner's manual
Keys Fitness
Keys Fitness HealthTrainer HT-740T owner's manual
Spirit
Spirit XT8 Service manual
NordicTrack
NordicTrack T 14.0 Treadmill Manuel de l'utilisateur