COSA SMART ALARKO User manual
OPERATION AND SETTINGS GUIDE
ALARKO BY COSA SMART
THERMOSTAT INSTALLATION GUIDE
CONTROL VIA MOBILE APP
OR DEVICE
You must download the Cosa mobile app to use all the features
of your Alarko by Cosa.
However, you may also use the buttons located on the device
to view room temperature, switch between smart modes or
change the target temperature of the current mode.
Top Button
Left and Right
Touch Buttons
DEVICE OPERATION
Press the top button to view current temperature, or use left and
right touch buttons to change the target temperature.
Once you’ve made the adjustment, the device will automatically
save the new target temperature.
To view your Alarko by Cosa’s current settings or to switch between
the Home, Sleep, Away, Custom or O mode, press top button to view
the room temperature, then press the top button again to view
the mode. You can use the touch buttons to the left and right to switch
modes. The device will automatically save the new mode shortly after
you’ve made the adjustment.
1
DEVICE SETTINGS MENU
If you see any of these alerts once you’ve accessed the settings
menu, you will know that there is either a pairing error (2), an
internet connection error (3) or that the batteries are low (4)
After you’ve pressed the top button to view the current
temperature, press the top button again for two seconds
to access the device’s settings menu (1).
After you’ve accessed the device’s settings menu, you can
use the touch buttons to the left and right to adjust pairing
settings ( 5) or internet settings ( 6 ) screen always on/o
( 7 ) or return to factory settings ( 8 ) or view battery usage
( 9 ). If your device is operated by battery, you won’t be able
to view the internet settings and screen always on icons; if it’s
operated by an adapter, you won’t be able to view the battery
settings.
2
65 7 8 9
3 4
USING THE SETTINGS MENU
ABC-ST-UM-4.2
Indicates the
battery level
* This will not appear
if Alarko by Cosa is
USB powered
Press top button to
set your Cosa to
pairing mode.
If pairing does not
occur within a minute,
Alarko by Cosa will exit
this mode
Alarko by Cosa cannot
connect to the
paired device
Pairing unsuccessful Pairing successful Alarko by Cosa
is ready
for pairing
Screen is On or O
Ready for
internet settings
Press top button to
reset yourdevice.
Press top button
again to conrm when
question mark appears.
Press top button to
set your device ready
to be connected to
the internet.
If connection does
not occur within 5 minutes
device will exit this mode.
* This will not appear
if Alarko by Cosa is
battery powered
Alarko by Cosa cannot
connect to the
internet
Internet
connection
could not be
completed
Alarko by Cosa is
connected to the
internet
Remote software
update in progress
Table of contents
Other COSA SMART Thermostat manuals
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
