Cooper Lighting AMETRIX SRR User manual

Universal

(4x)

assembly

Pan head screw

If possible, remove ceiling tile from grid to facilitate fixture

Fixture

installation.

bracket

Using cut out dimensions provided on page four(4), cut

#10-32 x3/8"

appropriate size opening in ceiling tile.

Ceiling tile

Insert fixture assembly into cut out in ceiling tile.

1. Using cut out dimensions provided on page four(4), cut

hole into dry wall and feed power wire to hole.

2. After removing fixture head, loosen #10-32 x3/8" Pan head

screws and remove cover plate closest to power feed.

3. Knock out appropriate hole for conduit and attach as shown

on page three(3).

4. Replace cover plate and secure with #10-32 x3/8" Pan head

screws and press fixture housing into hole in drywall.

(ceiling grid)

Pan head screws

Universal brackets

(4x)

3/8".

(2x)

Loosely reattach brackets to both sides of fixture housing.

2. Press brackets flush to ceiling tile and secure using #10-32 x

Replacing brackets on fixture housing

#10-32 x 3/8"

1. Prior to pushing fixture into hole in drywall, tie off fixture

housing to structure using saftey wire(by others) as show on

page three(3).

2. Gently push fixture housing into hole and tighten 1/4-20 x 1

1/2" Pan head screw from inside fixture housing to tighten

drywall bracket around drywall.

3. Connect appropriate wires from fixture head and ensure all

wires are properly matched.

4. Replace fixture head assembly on keyhole screws and

tighten.

1/4-20 x1 1/2"

Pan head screw Safety wires

(by others)

(4x)

Securing the fixture in drywall

Fixture housing

(drywall)

Wiring the fixture

Conduit from

Cover plate

power source.

(by others)

#10-32 x3/8"

Pan head screws

(2x)

Do not

work must meet local/national codes and be

: Before starting any work ensure

Vault w/ visor

These installation instructions are valid with the above Ametrix styles. mount fixtures vertically.

Roundel w/ visor

Installation Instructions

heet 2 of 4

Visor and Non-Visor

ADY071459 REV B (ECN80481)

Warning

that all sources of power are turned off. All

performed by a certified electrician.

C- croll w/ visor

Small, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Securing fixture to ceiling tile

Semi-recessed fixtures shown without thermal protectors

Warning: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician. Do not

mount fixtures vertically.

Installation Instructions

Vault w/ visor C- croll w/ visor Roundel w/ visor

These installation instructions are valid with the above Ametrix styles.

heet 3 of 4

Small, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Visor and Non-Visor

ADY071459 REV B (ECN80481)

Semi-recessed fixtures shown without thermal protectors

Securing the fixtures with safety wire

(both ceiling grid and drywall)

1. If applicable, replace ceiling tile with fixture secured back into ceiling. Remove adjacent tile from ceiling to facilitate wiring.

2. Depending on location of power source, loosen #10-32 x3/8" Pan head screws and remove appropriate cover plate and

knock out appropriate hole.

3. Using conduit fitting and washer, secure conduit to cover plate.

4. Attach appropriate wires and ensure all connections are properly matched.

5. Replace cover plate and secure with #10-32 x3/8" Pan head screws.

Choose appropriate cover plate

depending on location of power

source.

Ceiling surface

#10-32 x3/8"

Pan head screw

(2x)

Wiring the fixture

(both ceiling grid and drywall)

1. After securing fixture housing to ceiling structure using provided brackets, reinforce fixture using safety wire(by others).

2. Using all four tabs located on corners of fixture housing, tie off fixture to structure using safety wire(by others).

Cover plate

Conduit

(by others)

Conduit fitting

(by others)

Conduit Nut

(by others)

Safety wire

(by others)

Fixture housing

(lamps provided by others)

Cutout Dimensions In[mm]

Use only GE or Sylvania

CFL lamps

Semi-recessed fixtures shown without thermal protectors

Installation Instructions

Vault w/ visor C- croll w/ visor Roundel w/ visor

These installation instructions are valid with the above Ametrix styles

Warning: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician. Do not

mount fixtures vertically.

Small, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Visor and Non-Visor

heet 4 of 4

ADY071459 REV B (ECN80481)

11 1

292.10

165.10

10 3/4" Fixture head size

12 3/4" Fixture head size

Lamping Size Chart

14 1

16 "

357.19

165.10

FIXTURE SIZE

(inches/ mm) WATTAGE # OF

LAMPS LAMP TYPE LAMP DESCRIPTION

3/4

/ 273.05 39 W 1 T6 Ceramic Metal Halide

3/4

/ 323.85 70 W 1 T6 Ceramic Metal Halide

3/4

/ 323.85 150 W 1 T6 Ceramic Metal Halide

3/4

/ 323.85 26 W 1 4-Pin Triple

Tube Compact Fluorescent

3/4

/ 323.85 32 W 1 4-Pin Triple

Tube Compact Fluorescent

3/4

/ 323.85 42 W 1 4-Pin Triple

Tube Compact Fluorescent

3/4

/ 273.05 100 W 1 T4 Halogen (Single Ended)

3/4

/ 323.85 150 W 1 T4 Halogen (Single Ended)

3/4

/ 323.85 250 W 1 T4 Halogen (Single Ended)

LAMP

(not to scale)

This manual suits for next models

Other Cooper Lighting Light Fixture manuals

Cooper Lighting

Cooper Lighting Combolight LV860MH User manual

Cooper Lighting

Cooper Lighting Metalux SN Series User manual

Cooper Lighting

Cooper Lighting Metalux SA SERIES User manual

Cooper Lighting

Cooper Lighting FAIL-SAFE CFS User manual

Cooper Lighting

Cooper Lighting HALO L1702 User manual

Cooper Lighting

Cooper Lighting Halo L641 User manual

Cooper Lighting

Cooper Lighting Metalux 132T8 User manual

Cooper Lighting

Cooper Lighting Halo H2601E70 Chorus User manual

Cooper Lighting

Cooper Lighting ALL-PRO Series User manual

Cooper Lighting

Cooper Lighting METALUX G SERIES User manual

Cooper Lighting

Cooper Lighting Round Tapered Aluminum ADH061623 User manual

Cooper Lighting

Cooper Lighting RKD-140RS-48-10B User manual

Cooper Lighting

Cooper Lighting Neo-Ray 93-DIP User manual

Cooper Lighting

Cooper Lighting Metalux 217T8 User manual

Cooper Lighting

Cooper Lighting NEO-RAY 23DS User manual

Cooper Lighting

Cooper Lighting COMBOLIGHT MLU315 User manual

Cooper Lighting

Cooper Lighting Ametrix ADY071451 User manual

Cooper Lighting

Cooper Lighting EC User manual

Cooper Lighting

Cooper Lighting Combolight Quantum Series PAR30MH 39W PT User manual

Cooper Lighting

Cooper Lighting Neo-Ray 601-IW User manual

Cooper Lighting

Cooper Lighting Quiet Ceiling Trimless QCT-1975 User manual

Cooper Lighting

Cooper Lighting Cirque 4-ADP User manual

Cooper Lighting

Cooper Lighting PM133cb User manual

Cooper Lighting

Cooper Lighting Ametrix Wall/Ceiling Lighting User manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

Philips

Philips 32614 Series user manual

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification

ArtFox

ArtFox Beam 15R extreme manual