Converters.TV CVSD-41AR User manual
Introduction
The 4-in 1-out Video/SVideo Switcher w/RS232 is designed for switching
between video & S-video sources. Such as VCR, V player... to share one TV
display.
Features
- LED indicators.
- IR remote control
- Support standard video sources: 480i, 57 i.
- Plug and play, easy to install and operate.
- CVSD-41AR can be controlled either through input selection button on
the front panel or using included infrared remote control.
- RS-232 interface allows control from a distant device.
-Ideal for presentation and large shop integration.
-Support audio format: L/R (analog) or PC AMP speaker system (option)
Operation
Controls and
Functions
Front Panel
1. Power indicator LE .
2. Power ON/OFF switch: Push the button to turn ON/OFF the power.
3. IR sensor: Infrared remote control sensor.
4. Input 1 indicator LE .
5. Input 1 switch: Push the button, LE lights up, source 1 is selected.
6. Input 2 indicator LE .
7. Input 2 switch: Push the button, LE lights up, source 2 is selected.
. Input 3 indicator LE .
9. Input 3 switch: Push the button, LE lights up, source 3 is selected.
10. Input 4 indicator LE .
11. Input 4 switch: Push the button, LE lights up, source 4 is selected.
Rear Panel
1. RS-232: 9-pin -sub female connector for connecting to your other
control console for remote control.
2. CV/SV+Audio output:
Use a CV/SV cable to connect to your display.
Use a 1 RCA to 1 RCA video cable to your display.
Use a 2 RCA to 2 RCA audio cable to your display.
(Option) connects to your PC AMP speaker systerm.
3. CV/SV + Audio input 4: Use a CV/SV cable to connect to your
source 4.
4. CV/SV + Audio input 3: Use a CV/SV cable to connect to your
source 3.
5. CV/SV + Audio input 2: Use a CV/SV cable to connect to your
source 2.
6. CV/SV + Audio input 1: Use a CV/SV cable to connect to your
source 1.
7. C power jack : 5V1A power input ,center +.
Remote Control
1. Power: Switch between power ON
and Standby.
2. Press button 1 to select source 1.
3. Press button 2 to select source 2.
4. Press button 3 to select source 3.
5. Press button 4 to select source 4.
Note: Replacement battery can be
found at a local electronic retail store.
Connection and
Installation
CVSD-41AR RS-232 Remote Control Protocol
* The connection between CVS -41AR and remote controller with RS-232 modem cab
Pins definition of modem cable
* RS-232 transmission format:
Baud Rate : 9 00 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
Specifications
Table of contents
Other Converters.TV Switch manuals
Converters.TV
Converters.TV 693 User manual
Converters.TV
Converters.TV CDPS-UH4H1HFS User manual
Converters.TV
Converters.TV 15334 User manual
Converters.TV
Converters.TV CLUX-31GAME User manual
Converters.TV
Converters.TV 15401 User manual
Converters.TV
Converters.TV 826 User manual
Converters.TV
Converters.TV 15429 User manual
Converters.TV
Converters.TV 173 User manual
Converters.TV
Converters.TV 15121 User manual
Converters.TV
Converters.TV 15131 User manual
