Converters.TV 173 User manual
Introduction
The Video (PAL or NTSC) to RGB Converter with 12v Relay Switch for
Rever e Camera allow video ignal from NTSC/PAL/SECAM to be
converted into RGB/Sync or RGB B(Sync On Green) to allow video to be
viewed on mo t in-car LCD creen .
It al o include 12volt trigger for rever e camera input. Thi enable you to
add rever e camera to your car - when the car i placed into rever e, the
12volt relay trigger the video ource to come on from the camera to
override your navigation creen.
Plea e note that thi i one way tyle conver ion;
NTSC Video to NTSC RGB OR
PAL Video to PAL RGB
Feature
• Digital decoding and encoding en ure be t conver ion quality.
• Convert NTSC/PAL/SECAM compo ite video to RGB/Sync or
RGB B(Sync on
Green).
• Input Sy tem auto detecting.
• RGB input loop through.
• Sync Polarity witchable between po itive and negative.
• Output brightne adju table..
Operating Function
and Control
Front Panel
1. - And + button /re et button- The – and + button are u ed to decrea e
and increa e the brightne level re pectively. Simultaneou ly pre ing the –
and + button return brightne to it factory default value.
2. RGB /RG B witch- Thi button allow the u er to elect between RG B
(Sync on Green) or RGB .
3. 9 Pin D Female connector:-
Pin No. Wire Colour Function
Pin 1 Grey GND
Pin 2 Brown Sync of ource 1
Pin 3 Red Red out
Pin 4 Yellow Red in from ource1
Pin 5 Green Green in from ource1
Pin 6 Blue Green out
Pin 7 Purple Blue out
Pin 8 Orange Blue in from ource 1
Pin 9 Black Sync out
Source 1: Loop through RGB/S input
Source 2: Video Input
4. Toggle witch- Toggle between convert and RGB bypa .
Rear Panel
1. DC power upply input- Thi i the power upply input port.
2. Video input- Thi i the Compo ite Video input port.
3. Control wire - When the control wire i connected to 12 Volt, it force
the unit to go into convert mode. When the control wire ha no voltage
apply to it, the toggle witch will dictate the convert/bypa mode.
Connection &
In tallation
- Connect the RGB out port to your RGB device u ing a 9 Pin D female
connector.
- Set the witch to either RGB or RG B.
- U e the - and + to adju t the level of brightne to the de ired level.
- Connect the Video input port to you video device u ing a Compo ite
Video RCA jack.
- Connect the control wire. If the control wire i connected to 12V the unit
will be automatically forced to go into convert mode. If there i no voltage
applied to the
control wi e, then the toggle witch will decide the convert mode.
- When all the connection are complete en ure that the power upply i
connected to the power ocket.
Specification
Input Video input- 1Vp-p 75 ohm RCA Jack
RGB input: Pa through
Output RGB: 0.7 Vp-p 75 ohm 9-pin D female connector.
Sync: 3 Vp-p po itive or negative polarity
Power Supply DC 12V center po itive
Dimen ion 94mm (D) x 77mm (W) x 30mm (H)
Acce ory One et of D-Sub 9 Pin RGB bare wire and
one et of 2-wire power.
Weight 0.4 Kg
Table of contents
Other Converters.TV Switch manuals
Converters.TV
Converters.TV 15131 User manual
Converters.TV
Converters.TV 545 User manual
Converters.TV
Converters.TV 15429 User manual
Converters.TV
Converters.TV 15401 User manual
Converters.TV
Converters.TV 15121 User manual
Converters.TV
Converters.TV CLUX-31GAME User manual
Converters.TV
Converters.TV 594 User manual
Converters.TV
Converters.TV 825 User manual
Converters.TV
Converters.TV CVSD-41AR User manual
Converters.TV
Converters.TV CDPS-UH4H1HFS User manual
