Contec DS540-MPCI4WAP User manual

IEEE802.11a/b/g Wireless LAN MiniPCI Module

FX-DS540-MPCI4W

User’s Manual (Installation Manual)

CONTEC CO., LTD.

Chapter 1: General Description

This document contains the specifications pertinent to the wireless LAN module (FX-DS540-MPCI4W),

which comply with IEEE802.11a, IEEE802.11b and IEEE802.11g.

FX-DS540-MPCI4W is used attaching in the wireless LAN access point.

Features

2.4GHz Wireless LAN module

・IEEE802.11b and IEEE802.11g compatible

・BPSK, QPSK, CCK, and DSSS modulation schemes supported Data rates 1, 2, 5.5 and 11Mbps

・BPSK, QPSK, 16QAM, 64QAM and OFDM modulation shemes supported Data rate 6, 9, 12, 18,

24, 36, 48 and 54Mbps

5GHz Wireless LAN module

・ IEEE802.11a compatible

・BPSK, QPSK, 16QAM, 64QAM and OFDM modulation shemes supported Data rate 6, 9, 12, 18,

24, 36, 48 and 54Mbps

System Functions

・ Low power sleep mode control

・ MiniPCI Interfase

・ Radio circuit ON/OFF (RF Disable)

Chapter 2: Characteristics

Table1 : Mechanical Characteristics

Dimensions 39.65 x 59.6 x 2.4 (mm)

Weight 12g (max.)

Figure1 : FX-DS540-MPCI4W

Table2 : Electrical Characteristics

Supply voltage Vcc Nomial : 3.3V

Extreme : 3.3V +/- 0.3V

Strage temperature

Humidity

-25 to 70 deg.C

20 to 95%

Operating Temperature

Humidity

0 to 60 deg.C

20 to 95% (no-condensing)

Regulatory Domain 0x3A

Supported Channel *1

IEEE802.11b/g :

1-11ch (2412-2462MHz)

IEEE802.11a :

36-48ch (5180-5240MHz)

149-165ch (5745-5825MHz)

*1 : A user cannot change a supported channel.

59.6

39.65

(mm)

Chapter 3: Setup

FX-DS540-MPCI4W is used attaching in the wireless LAN access point. The wireless LAN access point

is restricted only to CONTEC products.

As an example, the case where it attaches in FX-DS540-ADPL-NR52-U is introduced.

Figure2 : How to attach in FX-DS540-APDL-NR5

Attach a coaxial cable and fix. (2 places)

Fix with a screw lock. (2places)

Chapter 4: Notes

When FX-DS540-MPCI4W is installed in the wireless LAN access point, the following remarks

are to be considered:

1. FX-DS540-MPCI4W is designated its own FCC ID Number: PQRDS540-MPCI4WAP;

therefore, the FCC ID Number should be appeared on the label on the exterior of the wireless

LAN access point unless it is visible from outside. Such label on the exterior should

include a statement, either “Contains Wireless LAN Module FCC ID:

PQRDS540-MPCI4WAP” or “Contains FCC ID: PQRDS540-MPCI4WAP”.

2. FX-DS540-MPCI4W is in compliance with the requirements of sub-sections 15.203, 15.205,

15.207, 15.209, 15.247 and 15.407 of FCC Rules Part 15. FX-DS540-MPCI4W is to be

installed in accordance with their requirements.

3. User Manual of the wireless LAN access point, in which is FX-DS540-MPCI4W installed,

will include the following statements required by FCC.

- FCC WARNING: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment

- This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

-In according with 47 CFR Part15.407 (e) U-NII devices operating in

5.15-5.25GHz frequency bands are restricted to indoor operations only.

-This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.

-This equipment complies with FCC radiation exposure limits set forth for

uncontrolled equipment and meets the FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65. This equipment should be installed and

operated with at least 20cm and more between the radiator and person’s body

(excluding extremities: hands, wrists, feet and ankles).

4. The installers must ensure that the public is not exposed to radio frequency energy levels in

excess of FCC guidelines in accordance with FCC Rules: Part 15 and FCC OET Bulletin 65,

Supplement C.

This manual suits for next models

Table of contents

Other Contec PCI Card manuals

Contec

Contec COM-1(LPCI)H User manual

Contec

Contec SMC-4DF-PCI User manual

Contec

Contec DIG-100M1002-PCI User manual

Contec

Contec CNT24-4(PCI) User manual

Contec

Contec DIO-48D-LPE User manual

Contec

Contec GPIB-F-LPE User manual

Contec

Contec AD16-64(LPCI)LA User manual

Contec

Contec FX-DS540-MPCI6 User manual

Contec

Contec AI-1216B-RB1-PCI User manual

Contec

Contec DIO-32DM2-PE User manual

Contec

Contec COM-4(PCI)H User manual

Contec

Contec COM-2(PCI)H User manual

Contec

Contec IPC SERIES User manual

Contec

Contec AO-1616L-LPE User manual

Contec

Contec DIO-0808L-PCI User manual

Contec

Contec AD12-64(PCI) User manual

Contec

Contec FX-DS540-MPCI6 User manual

Contec

Contec AIO-160802LI-PE User manual

Contec

Contec FX-DS540-MPCI4W User manual

Contec

Contec DIO-1616B-LPE User manual

Contec

Contec COM-2PD-LPE User manual

Contec

Contec AD12-64(PCI) User manual

Contec

Contec DIO-1616T-PE User manual

Contec

Contec CNT24-4D(PCI)H User manual

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide