Conrad WQ 140 User manual

Table of contents

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

La Crosse Technology

La Crosse Technology WS-8256-AL user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

La Crosse Technology

La Crosse Technology WT-3141b Quick setup instructions

La Crosse Technology

La Crosse Technology W86531 owner's manual

Sharp

Sharp SPC900 instruction manual

La Crosse Technology

La Crosse Technology 404-50447 quick start guide

Datexx

Datexx DF0063 quick guide

WQ 140

Solar Powered Alarm Desktop Clock

Instruction Manual

Fig. 1 Front view

Fig. 2 Back view

Introduction

This solar powered desktop clock comes with calendar, day, and temperature display. It

is solar powered with optional backup DC batteries. The light condition in most bright

indoor spaces is sufficient to recharge the built-in rechargeable batteries. Exposing the

unit to direct sunlight is not suggested and it is not necessary.

(1) “SNOOZE” button

(2) “MODE” button

(3) “UP/C/F/ ” button

(4) “SET ” button

(5) Battery compartment

Getting started:

Toggle the “On/Off” switch located under the battery compartment (5) to turn on the clock,

Optional batteries installation

1. Open battery compartment (5) on the back of the unit. (see figure 2)

2. Install / replace with 2x “AAA” size batteries in the compartment. It is

recommended that only alkaline batteries are used.

3. Replace the battery compartment (5) on the back of the unit.

Batteries safety warnings:

1. Please read all instructions carefully before use.

2. Install batteries correctly by matching the polarities (+/-).

3. Always replace a complete set of batteries.

4. Never mix used and new batteries.

5. Remove exhausted batteries immediately.

6. Remove batteries when not in use.

7. Do not recharge and do not dispose of batteries in fire as the batteries may

explode.

8. Ensure batteries are stored away from metal objects as contact may cause a

short circuit.

9. Avoid exposing batteries to temperature or humidity extremes or direct sunlight.

10. Keep all batteries out of reach from children. They are a choking hazard.

11. Please retain packaging for future reference.

To set time:

a) In clock mode ,Long press [SET] to enter setting mode, then press [UP] to

alternate to the days of the week display language. Press [SET] to confirm

setting and move on to 12/24-hour time format selecting.

b) Press [SET] and hour digits flash, press [UP] to switch between 12-hour and 24-

hour.

c) Press [SET] and second digits flash, press [UP] to clear second value to zero.

d) Press [SET] and hour digits flash, press [UP] to change values.

e)

Press [SET] and minute digits flash. Press [UP] to change values.

f) Press [SET] and year digits flash. Press [UP] to change values.

g) Press [SET] and month digits flash. Press [UP] to change values.

h) Press [SET] and date digits flash. Press [UP] to change values.

The days of the week value will be changed automatically according to the

date value just changed.

i) Press [SET] to confirm setting and return to normal time display.

In setting mode, if no operation is carried out for 60 seconds, it will confirm and

return to normal time display mode automatically.

To set alarm time:

a) Press [MODE] to alternate to alarm clock mode. Long press [SET] for 2 seconds

to enter alarm clock setting. Press [SET] to change target in following sequence:

hour →second →confirm.

b) During alarm clock mode other than setting mode, press [UP

C/F/

] to turn

on/turn off alarm.

c) During alarm sounding, press [SNZ] and the alarm will be sounding again after 5

minutes.

d) During alarm clock mode other than setting mode, if no operation is carried out

for 60 seconds, it will return to clock mode automatically.

Setting the Thermometer

Touch “UP/C/F/ ”button (3) to toggle between Fahrenheit and Celsius.

Warnings

•Do not subject the unit to excessive force, shock, dust, temperature or humidity.

•Do not immerse the unit in water.

•The battery in this product is not replaceable. Do not replace.

•Avoid exposing unit to direct sunlight.

•The rechargeable battery has a limited shelf life. Do not try to replace the

rechargeable battery.

•Dispose the complete unit when battery is no longer charging or when the unit is

no longer displaying the temperature and / or humidity.

•Do not remove any screws.

•Do not dispose this unit in a fire. IT MAY EXPLODE.

•Keep unit away from small children. The unit or parts of the unit might be a

choking hazard.

•Never attempt to recharge the batteries in any other methods.

•Dispose the unit legally.

•Recycle when possible.

•Solar cells will charge built-in rechargeable batteries at a minimum average of

3,000 lux.

Specifications

1. Temperature Range : -9.9°C to 50 °C ( 14.2°F to 122°F)

2. Temperature Tolerance : +/- 1°C

3. Calendar range: year 2000 to year 2099