Connected Inventions Detectify 3.2 RCZ1 User manual
Detectify 3.2 RCZ1
User manual!
Using this manual
Thank you for choosing this Connected Inventions device. This device will provide you high-
quality IoT with Connected Inventions’ exceptional technology and high standards. This
manual has been specially designed to guide you through the functions and features of your
device.
Read me first
• Before using your device, read the entire manual and all safety instructions to ensure safe
and proper use.
• The descriptions in this manual are based on the default settings of your device.
• The images used in this manual may differ from the actual product.
• The contents of this manual may differ from software provided by service providers or
carriers, and are subject to change without prior notice.
• Access the Connected Inventions website (www.connectedinventions.com) for the latest
version of the user manual.
• Available features and additional services may vary by service provider.
• Applications on this device may perform differently from comparable applications and may
not include all functions available (by ie. downlink messaging features)
• Connected Inventions is not liable for performance issues caused by third-party
applications or improper installation.
• Please keep this manual for future reference.
• Maintenance
• In case of malfunction, deliver the device to the supplier. Do not open the cover.
• Transportation
• Do not remove packing material and do not repack the device unless necessary. Contact the
shipping agent before transportation. Inside the device there is a battery which contains
approximately 1.4 g of lithium.
• Disposal
• Return the device to a disposal station which collects electronics waste and batteries.
• Operation
• Protect the device from moist, water, and dirt. !
Detectify
Connected Inventions Detectify is an industry grade passive infrared (PIR)
sensor for movement detection indoors. The device utilises ultra low power two
way radio communications with Sifgfox network technology. The device is battery
powered and with normal usage running default settings, the batteries will last up
to five years. There are two different versions of the device: 90 degree wide
detection angle version (see picture below) for sensing motion in rooms and 30
degree narrow detection angle version (see picture below) for more restricted
areas like work desks. The device can be used for alerting immediately about
movement in space as well as counting movements periodically and
cumulatively.
Picture 1. 90 degree wide detection angle for sensing motion in rooms.
Picture 2. 30 degree narrow detection angle for more restricted areas.!
Functions
Detectify R3.2 has two modes: Activity mode (AM) and Inactivity mode (IM). In
Inactivity mode, the device waits to detect movement. Once movement is
detected, the mode is changed to Activity Mode, Activity Counter and Cumulative
Activity Counter is incremented and message is sent immediately. While in
Activity mode, the device counts 3 second time slots where movement were
happening and increments counters accordingly. After Activity Reporting Period
(ARP) has been reached, the device will send a message with incremented
counters and starts a new Activity Reporting Period. Still in Activity Mode, in case
no movement was detected until Inactivity Detection period (IDP) was reached,
the last movement counters is sent and the device goes to Inactivity mode. Once
Inactivity Reporting Period (IRP) has been gone without any movement, the
device sends periodical inactivity message.
Diagram 1. Functions and modes block diagram.!
Inactivity Mode
Activity Mode
Inactivity
Reporting
Period
Activity
Reporting
Period
Inactivity
Detection
Period
Activity
Diagram 2. State transition example where inactivity report has activity count = 0.
Diagram 2. State transition example where inactivity report has activity count > 0.!
Activity update = FALSE
Activity count = 0
Cumulative Activity
count = 0
Activity update = TRUE
Activity count = 1
Cumulative Activity
count =1
Activity update = TRUE
Activity count = 4
Cumulative Activity
count = 5
Activity Reporting
Period
Activity update = FALSE
Activity count = 0
Cumulative Activity
count = 5
Inactivity Detection
Period
Activity update = FALSE
Activity count = 0
Cumulative Activity
count = 5
Inactivity Reporting Period
Note! The inactivity Detection Period begins after last activity
Activity update = FALSE
Activity count = 0
Cumulative Activity
count = 0
Activity update = TRUE
Activity count = 1
Cumulative Activity
count =1
Activity update = TRUE
Activity count = 7
Cumulative Activity count =8
Activity Reporting
Period
Activity update = FALSE
Activity count = 2
Cumulative Activity
count = 10
Inactivity Detection
Period
Activity update = FALSE
Activity count = 0
Cumulative Activity
count = 10
Inactivity Reporting Period
Note! The activity count is reported even if the event is inactivity
Assembling and Installation
• Save the identifier and the key of the device.
• The identifier and the PAC key are on the label on the bottom of the device. You
can also read the identifier and the PAC key using the QR code. The picture
below is an example of a label.
Picture 3. Bottom label.
• Use a small screwdriver to slide the power switch to “I” position. Please note
that the switch should slide relatively effortlessly. Do not use excess force to
slide the switch!
Picture 4. Power switch at the bottom of the device.
On
• Install the device to a suitable position to detect movement. Maximum
detection distance is approximately five meters.
• The detection angle of the device is about 30 or 90 degrees depending on the
version.
• You can use direct screw plate (included) or angle joint support (included) for
attaching the device to surface.
Please note! Avoid placing device closer than 15cm on any metal or magnetic
object, electric cables, electric devices or selective glass as this will dramatically
reduce radio performance as well as battery life of the device.
Picture 5. Improper placement for the device!
!
• After attaching the screw plate, place the device to screw plate so that the pins
fall through twist-holes on the bottom of the device and twist clockwise until the
device locks into place.
Picture 6. Attach device to the screw plate by twisting clockwise
•For work desk installation, make sure the hinge of the screw plate is pointing to
metal support structure (if any). Attach the device to screw plate pins so that the
antenna is pointing away from metal structure and twist gently clockwise until
device locks in place. Avoid placing the antenna closer than 15cm to any metal
objects.
Picture 7 and 8. Antenna placement inside the device!
Antenna
Antenna
Uplink: Payload description
BYTE
BIT
TYPE
DESCRIPTION
0
0
Reserved
0
1
boolean
Activity update
0
2
boolean
Full TX power mode 0=off,1=on
0
3
boolean
Power control 0=off, 1=on
0
4-7
UINT4
Version
1-2
0-15
UINT16
Activity count
3-6
0-32
UINT32
Cumulative activity count
7-11
Reserved
Table of contents
Other Connected Inventions Network Hardware manuals
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
