Headset connection
1 Take the headset out of package, chose the suitable headband for you and press the
multifunction button.
1.1 If the headset had ever paired some Bluetooth device before, push the multifunction button
about 5 seconds and the headset will automatically search the last paired Bluetooth device.
Besides, the blue LED will slowly twinkle（图示）
1.2 If the headset had never paired any Bluetooth device before, make sure the headset is
power off and long press the multifunction button around 8 seconds until the blue LED flash
rapidly to indicate pairing mode. （图示）
2. Activate the Bluetooth feature on the phone or other devices, then use their setting to
add/search/discover new Bluetooth devices. （图示）
3. Select “HS-BT01” from the list of Bluetooth devices shown on the phones or other devices.
If ask for a pass code, enter four zeros “0000”. Some phones also ask to confirm headset
connection after pairing. （图示）
4. Blue LED will stop flashing but keep solid after the headset is successfully paired. （图示）
5. select “play through headset” in your smart phone if required
6. Adjust the headband to your favorite. （图示）
Enjoying music
1. After connection, play the music and enjoy the on the headset.
2. Adjust the volume on headset or Bluetooth devices to your favorite level.
3. Pause or resume the song, please short press the multifunction button.
4. The music will automatically pause if answer or dial a call and resume the music after the
call ending.
CAUTION – Playing too loudly may affect your hearing.
Calling
1. When the headset is connected to the phone with Bluetooth, all callings could be
exchanged to the headset automatically.
2. Accept or end a call by short press the multifunction button. Long press the multifunction
button for refusal.
Battery Charging
1. The red LED will continually flash if the battery is in low power.
2. Take out the USB cable from the package; connect the mini USB plug into mini USB jack
on the headset, and the other end to an USB port on your PC, etc. The red LED will stop
flashing and keep solid.
3. The red LED will turn off if charging finished. Usually it will take 3 hours for fully charging.
Multifunction Button Introduction
Function Button Operation
Turn on Multifunction Button Long Press (5s)
Pair Multifunction Button Longest press (8s)
Turn off Multifunction Button Long Press (5s)
