CommScope FOSC-OC-3 User manual

3.1 The tray can be removed by hinging the tray in vertical position and

pull it out of the tray tower.

3.2 The tray can be inserted in the tray tower by pushing the tray at

vertical position into the tray tower.

1 Prepare the enclosure according to the appropriate points of

the installation instruction delivered with the enclosure.

2 Insert the splitter tray into the appropriate slot of the tray tower.

When necessary, replace the appropriate tray by the splitter tray.

3 Removing and inserting a tray

4 Continue with the appropriate points of the installation instruction

delivered with the enclosure.

FOSC-OC-3

INSTALLATION INSTRUCTION

US FOSC tray (D size) with integrated splitter

TC-668-IP

Rev A, Feb 2017

www.commscope.com

5.2 At the end of each fiber, a flag can be attached with the

identification of the fiber. The identification is as follows:

Ix.y: I=Incoming fiber of the splitter

x=splitter number

y=splitter port

Ox.y: O=Outgoing fiber of the splitter

x=splitter number

y=splitter port

In case of asymmetrical splitters, the identification of the ports can be

made through the dB value that is written on the back of the flag at the

end of the fiber.

5.3 Select the appropriate fiber to be spliced, cut the identification

flag when available and do all necessary steps till the splice protector is

installed.

Note: Make sure not to lose fiber identification.

The fiber end can be deformed to create a higher Return Loss on the

unused fibers.

Make sure to cut the fiber end (50 mm, 2” or behind the ID flag)

before starting with the splicing steps.

5.4 Proceed with the storage of the splices and the fibers according to

the installation instruction delivered with the enclosure.

Note: Make sure the splice protector has cooled down before storing in

the splice protector modules.

5.1 The above drawing shows the dedicated spaces (in the D tray) where the fibers are to be stored after splicing

5 Identification

Identification can be done by means of

• colored fibers

• colored tubes

• marked tubes

• colored tapes

• flags.

Make sure not to lose ID.

FOSC-OC-3 (D size tray)

FOSC and all trademarks identiﬁed by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.

This document is for planning purposes only and is not intended to modify or supplement any speciﬁcations or warranties relating to

CommScope products or services.

This product is covered by one ore more U.S. patents or their foreign equivalents. For patents, see:

www.commscope.com/ProductPatent/ProductPatent.aspx.

To ﬁnd out more about CommScope® products, visit us on the

web at www.commscope.com

For technical assistance, customer service, or to report any

missing/damaged parts, visit us at:

http://www.commscope.com/SupportCenter

This manual suits for next models

Table of contents

Other CommScope Cables And Connectors manuals

CommScope

CommScope AMP NETCONNECT SL Series User manual

CommScope

CommScope SCIL-B User manual

CommScope

CommScope LightCrimp Plus SC Simplex User manual

CommScope

CommScope SYSTIMAX VisiPatch CPC5562 User manual

CommScope

CommScope LSX-288 User manual

CommScope

CommScope FOSC-450D User manual

CommScope

CommScope FOSC450 C User manual

CommScope

CommScope QWIK MPO Series User manual

CommScope

CommScope LC User manual

CommScope

CommScope HELIAX FiberFeed HFA208 Series Instruction sheet

CommScope

CommScope HELIAX FiberFeed FDH1210-24SE2 Series Instruction sheet

CommScope

CommScope AMP NETCONNECT 1933352 Series User manual

CommScope

CommScope FOSC 450 A User manual

CommScope

CommScope ION-M7P User manual

CommScope

CommScope FOSC-350C User manual

CommScope

CommScope FIST-RSKG-16 User manual

CommScope

CommScope TDUX-35 User manual

CommScope

CommScope ETHERSEAL 1479563-2 User manual

CommScope

CommScope HELIAX FiberFeed FDH1206-12M50 Series Instruction sheet

CommScope

CommScope 760230938 User manual

CommScope

CommScope AMP NETCONNECT 553454-1 User manual

CommScope

CommScope LC User manual

CommScope

CommScope HELIAX FiberFeed HFE810 Series Instruction sheet

CommScope

CommScope HELIAX FiberFeed User manual

Popular Cables And Connectors manuals by other brands

Philips

Philips SWA6310 Specifications

StarTech.com

StarTech.com CRJ4550PK quick start guide

Nohau

Nohau EMUL-IP2K-PC user guide

Foxun

Foxun SX-SP144E-HD4K2K operating instructions

Philips

Philips SWA3305W Specifications

opticis

opticis Stretch DVIM1-1P0x user manual

Volkswagen

Volkswagen VAS 6558A operating manual

NEXIBO

NEXIBO N-13 user manual

CYP

CYP PU-1H3HBTL Operation manual

Allen-Bradley

Allen-Bradley 1784-u2dhp installation instructions

Global Caché

Global Caché Flex Link Blaster quick start

Hauppauge

Hauppauge USB-Live2 Quick installation guide

Fenix

Fenix MPSV 15 installation manual

BEGA

BEGA 71 085 manual

Tesla

Tesla HPWC installation manual

GAMERON

GAMERON LUXURY TV CABLE instruction manual

molex

molex Milli-Grid Dual row 87568 Series operating instructions

Burndy

Burndy Continental Industries thermOweld CRE-7 instructions