CommBox Interactive Classic 4K User manual
CommBox Interactive
Classic 4K User Manual
Revision: 5
Table of Contents
1 Preparations 4
1.1 Parts List 4
1.2 Control Lights & Buttons 4
1.2.1 Light indicators 4
1.2.2 Control buttons 4
1.3 Input/Output Connections 5
1.3.1 Connector name and function 5
1.3.2 USB multimedia playback format 6
1.4 Remote Controller Button Description 7
2 Setup 9
2.1 Remote Control Setup 9
2.1.1 Inserting batteries into the remote 9
2.2 Touchscreen Setup 9
2.2.1 Turning on the power 9
2.2.2 Changing language of the menu 9
2.2.3 Cleaning 10
3 Connect to a PC or a Laptop 11
3.1 HDMI Connection 11
3.2 VGA Connection 11
4 Menu Control 13
4.1 Input Selection 13
4.2 Video Adjustment 14
4.3 Audio Adjustment 15
4.4 Setup Adjustment 16
5 Troubleshooting 18
5.1 Touch Issues 18
5.2 Sound Issues 18
5.3 Image 19
5.4 Touch 20
6 Supported Resolutions 21
7 Index 22
4+61 2 9975 6001
1 Preparations
1.1 Parts List
If these items are missing, contact your dealer or service center:
Power Cable (Optional)
Remote Controller HDMI Cable
AAA 1.5V Battery x 2
Touch USB Cable & Extension cable
1.2 Control Lights & Buttons
You can control the touchscreen by using the control buttons on the right side of the frame.
1.2.1 Light indicators
Remote Sensor Power indicator
Power on Green
Stand-by Red
Power Saving (Eco) Red
Power Saving (Normal) Orange or Red/Green Blinking
1.2.2 Control buttons
Button Function
Up When a menu is visible on-screen, this button operates identically to the up-
arrow
Down When a menu is visible on-screen, this button operates identically to the down-
arrow
+61 2 9975 6001 5
Vol- Volume decrease
Vol+ Volume increase
Source Open/close source menu for input select
Menu On-screen display OSD, or to exit the on-screen display and return to the
previous one.
Power Power on/off
1.3 Input/Output Connections
1.3.1 Connector name and function
Input/Output Function
Earphone To connect audio output
SPDIF To connect SPDIF
6+61 2 9975 6001
Composite To connect composite for DVD etc
Audio In To connect audio input (3.5)
VGA In To connect VGA video input
Component To connect component for DVD etc
HDMI 3 In To connect HDMI 1.4 video & audio input - 3
HDMI 2 In To connect HDMI 1.4 video & audio input - 2
HDMI 1 In To connect HDMI 1.4 video & audio input – 1
USB In To connect with USB device
Audio Out To connect audio output
Touch In To connect touch
RS-232C In To connect RS232 input cable with control device (D-sub 9pin)
Power Input Power connector (AC 100-240V, 50/60Hz)
1.3.2 USB multimedia playback format
The below table shows the supported file types.
Media File Extension Detail
Music WMA, MP3,M4A, AAC .wma, .mp3, .m4a
Photo JPG, BMP, PNG .jpg, .bmp, .png
Movie MPEG1, MPEG2, MPEG4,
H264,
RM, RMVB, MOV, MJEPG,
VC1,
Divx, FLV
.avi, .mpg, .dat, .vob, .div, .mov, .mkv, . rm,
.rmvb, .mp4, .mjpeg, .ts,
.trp, .wmv, .asf, .flv
+61 2 9975 6001 7
TXT .TXT
If the product does not operate even though the power is connected, check the
power switch on the touchscreen is turned on.
1.4 Remote Controller Button Description
Button Function
Source Select input signal
Aspect Adjust the window ratio
Arrow Up Navigate up
Arrow Down Navigate down
Arrow Left Navigate left
Arrow Right Navigate right
OK Select to change menu
Menu Display or hide menu on the screen
+ Volume up
- Volume down
Title (Freeze) Freeze toggle On/Off
8+61 2 9975 6001
+61 2 9975 6001 9
1.
2.
3.
1.
2.
2 Setup
2.1 Remote Control Setup
2.1.1 Inserting batteries into the remote
Press the tab on the battery case and open it
Insert the battery (1.5V AAA) into the battery case
Replace the battery case and push it down until clack sounds
If anything obstructs the front of the IR receiver the remote may not work
When loading the battery, check if the polarity of the batteries is correct
If you are not using the remote for long time, remove the batteries to prevent
damage caused by leaking battery fluid
Don't expose the battery to direct sunlight or excessive heat such as a fire
2.2 Touchscreen Setup
2.2.1 Turning on the power
Connect the power cable of the product into outlet with AC 100-240V 50 / 60Hz
Turn on the main AC power switch
If the power indicator is green, the screen will turn on automatically
If the power light is red and not green, press the power button on the remote or on the
bottom right hand side of the touchscreen to turn on the power
2.2.2 Changing language of the menu
The menu's language is set to English as the default
Users can select alternative languages if required
To change the menu language,
Press the Menu button to open the menu. Select Setup from the main menu
Select Language of the Setup menu
10 +61 2 9975 6001
3. Scroll to the language you want to select and click OK, and then exit the menu
2.2.3 Cleaning
After disconnecting the power cable, clean the product screen lightly with a dry and soft cloth
Do not clean the product with a wet cloth or spray.
If washed with any cleaning agent including brighteners, abrasives, waxes, benzene,
alcohol, solvent or surface active agent, the surface of the product may be damaged.
If cleaning inside the product is required, please contact your dealer or service center
Table of contents
Popular Touchscreen manuals by other brands
Elecro Engineering
Elecro Engineering Poolsmart Plus Installation & operating manual
Johnson Controls
Johnson Controls IQ4 HUB installation manual
Elo TouchSystems
Elo TouchSystems ET2270L user manual
Elo TouchSystems
Elo TouchSystems ET1002L user manual
Elo TouchSystems
Elo TouchSystems 3201L user manual
Duratec
Duratec S15 user manual
