Code CR7000 Series User manual
MANUAL VERSION 1.0
RELEASE DATE: MARCH 2019
iPhone® is a registered trademark of Apple Inc.
Dragontrail™is a trademark of Asahi Glass, Limited.
1
Note from the Code Team
Thank you for purchasing the CR7018! Healthcare’s first purpose-built battery backup case is here.
Approved by infection control specialists, the CR7018 is fully enclosed and built with CodeShield®
plastics, known to withstand the harshest chemicals used in the industry. Made to protect and
extend the battery life of Apple’s iPhone®7 and 8, the CR7018 will keep your investment safe and
clinicians on the go. The DragonTrail™ glass screen provides another layer of quality for the highest
level of protection on the market. Easily swappable batteries keep your case running as long as you
are. Don’t wait for your device to charge again—unless that’s how you prefer to use it, of course.
Made for enterprises, the CR7018 product ecosystem provides a durable, protective case, flexible
charging methods, and a battery management solution so you can focus on what matters.
We hope you enjoy your enterprise mobility experience. Have any feedback? We’d love to hear from
you.
Your Code Product Team
product.strategy@codecorp.com
2
Table of Contents
Case and Accessories ............................................................................................................. 3
Product Kits ...................................................................................................................................3
Battery Charging Kits......................................................................................................................3
Cables............................................................................................................................................3
Accessories ....................................................................................................................................3
Services .........................................................................................................................................3
Product Assembly .................................................................................................................. 4
Unpacking and Installation .............................................................................................................4
Inserting iPhone ...................................................................................................................................................4
Inserting/Removing Batteries..............................................................................................................................7
Charger Assembly and Mounting ........................................................................................................................8
Battery Charging and Best Practices ..................................................................................................................12
Maintenance and Troubleshooting ...................................................................................... 13
Approved Disinfectants ................................................................................................................13
Routine Cleaning and Disinfection ................................................................................................13
Troubleshooting...........................................................................................................................13
Contact Code for Support .............................................................................................................14
Warranty ............................................................................................................................ 14
Legal Disclaimer .................................................................................................................. 14
Statement of Agency Compliance ........................................................................................ 15
3
Case and Accessories
The following tables summarize the parts included within the CR7018 product line. More product
details can be found on Code’s website.
Product Kits
Part Number Description
iPhone 7
CR7018-PKXXX-7 CR7018 (iPhone 7 Case, Light Gray, Palm), Battery
CR7018-PKXXU-7 CR7018 (iPhone 7 Case, Light Gray, Palm), Battery, 3-ft. Straight USB Cable
CR7018-PKX2X-7 CR7018 (iPhone 7 Case, Light Gray, Palm), Battery, Spare Battery
iPhone 8
CR7018-PKXXX-8 CR7018 (iPhone 8 Case, Light Gray, Palm), Battery
CR7018-PKXXU-8 CR7018 (iPhone 8 Case, Light Gray, Palm), Battery, 3-ft. Straight USB Cable
CR7018-PKX2X-8 CR7018 (iPhone 8 Case, Light Gray, Palm), Battery, Spare Battery
Battery Charging Kits
Part Number Description
CRA-A172 CR7018 5-Bay Charging Station and 3.3 Amp US Power Supply
CRA-A175 CR7018 10-Bay Charging Station and 3.3 Amp US Power Supply
CRA-A176 Code Reader Accessory for CR7018 - Charger Upgrade Package (Split
Cable Adapter, 5-Bay Battery Charging Station)
Cables
Part Number Description
CRA-C34 Straight cable for CR7018, USB to Micro USB, 3 ft (1 m)
CRA-C70 Split Cable Adapter
Accessories
Part Number Description
CRA-B718 CR7018 Battery
CRA-VM718 Vertical Mount Base for CRA-A172 and CRA-A175 Charging Stations
CRA-P71 3.3 Amp US Power Supply
CRA-P4 US Power Supply - 1 Amp USB Wall Adapter
Services
Part Number Description
SP-CR718-E107 Accessory for CR7018 - Replacement Top Plate for iPhone 7, 1 count
SP-CR718-E1074 Accessory for CR7018 - Replacement Top Plates for iPhone 7, 4 count
SP-CR718-E108 Accessory for CR7018 - Replacement Top Plate for iPhone 8, 1 count
SP-CR718-E1084 Accessory for CR7018 - Replacement Top Plates for iPhone 8, 4 count
*Other CR7018 service and warranty options can be found on Code’s website
4
Product Assembly
Unpacking and Installation
Read the following information before unpacking or assembling the CR7018 and its accessories.
Inserting iPhone
The CR7018 houses Apple’s iPhone 7 and 8 models. Please note that the top plate will vary
depending on the iPhone model.
The CR7018 case will arrive with the top and bottom carriage connected. With a thumb on
the right and left side of the speaker opening, push up approximately 5 millimeters to clear
the lightning connector.
iPhone 7 top plate
with fitted insert
iPhone 8 top plate
5
Pull the top plate toward you, away from the bottom carriage. Do NOT try to slide it all the
way up.
Before inserting the iPhone, thoroughly clean the iPhone screen and both sides of the glass
screen protector. Screen responsiveness will be hindered if the screens are dirty.
Insert the iPhone into the top plate; it will click into place.
6
Replace the top plate into the bottom carriage directly above the lightning connector, similar
to the removal process; the top plate will be inserted approximately 5 millimeters from the
edge of the bottom carriage. Push down on the top plate to secure the iPhone onto the
lightning connector and seal the case.
Do NOT try to slide it down from the top.
Your CR7018 case will come with two screws and a 1.3 mm hex key. For larger deployments,
it is recommended to procure a specialized tool
for quick assembly.
Insert the screws to secure phone and case.
The following URLs will direct you to
recommended tools for installing the provided
screws.
•Ultra-Grip Screwdriver
ohttps://www.mcmaster.com/7400A27
•8 Piece Hex Screwdriver Set
ohttps://www.mcmaster.com/57585A61
7
Inserting/Removing Batteries
Only Code’s CRA-B718 batteries are compatible with the CR7018 case. Insert a B718
battery into the cavity; it will click into place.
The fuel gauge LEDs will light up, indicating the battery’s state of charge. If the LEDs do not
light up, fully charge the battery before using.
To verify the battery is properly connected, a lightning bolt will be
located on iPhone’s battery, signifying a charge status and successful
battery installation. To remove the battery, push both battery
compartment latches inward until the battery pops out. Pull the battery
from the cavity.
8
Charger Assembly and Mounting
The CR7018 chargers are designed to charge the B718 batteries. Customers can purchase
5 or 10-bay chargers. Two 5-bay chargers are mechanically interlinked to create the 10-bay
charger. 5 and 10-bay chargers use the same power supply (CRA-P71), but have different
cables: the 5-bay charger has a single, linear cable where the 10-bay charger requires a
two-way splitter cable. Charging stations can be mounted on a vertical mount accessory or to
the wall, which can be seen in the sections below.
Note: Use only cables supplied by Code to ensure proper communication and adequate
charge rates. Only Code cables are guaranteed to work. Damage caused using third-party
cables will not be covered under warranty.
5-Bay Charger Installation
The 5-bay charging station will hold and charge 5 batteries from zero to full charge within 3
hours. The CRA-A172 charger kit comes with a 5-bay charger, cable and power supply.
Insert the cable into the female port on the bottom-side of the charger. Route the cable
through the grooves and connect it to the power supply.
LED charge indicators reside on both sides of each battery bay to quickly check the charge
status from any angle.
9
Note: There is a delay of up to thirty minutes between the battery gauge indicating it’s fully
charged and the charger LEDs switching from blinking to solid. LED indicator definitions are
presented in the “Inserting Batteries into the Charger”section.
This manual suits for next models
1
Table of contents
Other Code Barcode Reader manuals
Code
Code 2600 User manual
Code
Code CR1400 User manual
Code
Code CR3 User manual
Code
Code CORTEXJPOS CR6000 User manual
Code
Code CORTEXJPOS CR5000 User manual
Code
Code CR950 User manual
Code
Code CR5200 User manual
Code
Code Code Reader 3600 User manual
Code
Code CR8200 User manual
Code
Code CR821 Series Quick setup guide
Code
Code CORTEXJPOS CR5000 User manual
Code
Code Reader 1200 User manual
Code
Code 2600 Quick setup guide
Code
Code Code Reader 2500 User manual
Code
Code CR900FD User manual
Code
Code Code Reader 1000 User manual
Code
Code CR2700 User manual
Code
Code Reader 1200 Installation and operation manual
Code
Code CR950 User manual
Code
Code CR3 User manual
