Code Alarm Ca5554 Professional series User manual

CCJCc~LAi=lm

i=»r:lOFESSIONA

SEr:liES

Automatic

I Manual Transmission

Remote Start

with

Keyless Entry

Installation Guide

for

models:

ca5554

Table

Contents

Before You Begin.........................................................................................3

Wire

Connection

Guide

...............................................................................4

Pin Main Harness .................................................................................5

3 Pin Parking Light Harness......................................................................8

6 Pin Start Harness ...................................................................................9

4 Pin Alternate Harness...........................................................................10

2 Pin Door Lock Harness ........................................................................

Additional

Ports

.........................................................................................15

Antenna

LED

Programming Port........................................................ 15

OBI

Port...................................................................................................15

Telematic Interface Port...........................................................................15

Set Up &

Programming

.............................................................................16

Transmitter Programming........................................................................16

Manual Feature Programming.................................................................16

Programming Feature Banks ..................................................................17

Tach Programming ..................................................................................20

Smart Tachless Mode..............................................................................20

Feature

Descriptions

.................................................................................

Transmitter

Button

Functions

..................................................................29

Remote Start

Shutdown

Diagnostics

......................................................30

System

Layout

...........................................................................................

2 ca5554 Install rev A

•

...

BEFORE YOU BEGIN

PROFESSIONAL INSTALLATION

STRONGLY RECOMMENDED

Roll down window to avoid locking keys

vehicle

during installation

Avoid mounting components or routing wires near

hot surfaces

Avoid mounting components or routing wires near

moving parts

Use a Digital Multi Meter for testing and verifying

circuits. DO NOT USE A TEST LIGHT, OR

"COMPUTER SAFE PROBE" as these can set off air

bags or damage vehicle computers.

Technical Support

(BOO)

421-3209

go to

http://avxtech1.com

2014

Voxx.

c..

zr-

-I

0...(9

M-

.....J

.....

0::

.....

c..

(.0

Pin Main Harness

GRAY/RED

PARKING

BRAKE

INPUT ( - )

PURPLE DOOR INPUT (

GREEN

DOOR INPUT ( - )

BLACK/WHITE

ILLUMINATED ENTRY

OUTPUT

(-)

BROWN/BLACK

HORN OUTPUT

(-)

RED/WHITE TRUNK

RELEASE

OUTPUT ( - )

BLUE/BLACK

START STATUS

ACTIVE

OUTPUT

( - )

PURPLE/WHITE

TACH INPUT

GRAY

HOOD PIN INPUT ( - )

BROWN/RED

BRAKE

INPUT ( + )

VIOLET/BLACK

AUX

1 OUTPUT ( - )

3 Pin Parking Light Harness

BLACK GROUND

WHITE/RED PARKING LIGHT INPUT

WHITE PARKING LIGHT OUTPUT

6 Pin Start Harness

PURPLE STARTER OUTPUT -MOTOR SlDE

RED BATTERY 12V (

ORANGE ACCESSORY 1 ( + )

PINK/WHITE IGNITION 2 ( + )

RED/WHITE BATTERY 12V (

PINK IGNITION 1 ( + )

ca5554 Install rev A

-(.)

a. a

N.....J

4 Pin Alternate Harness

BLACK/YELLOW PULSE DURING CRANK ( - )

GREEN/WHITE PULSE AFTER

SHUlDOWN

( - )

LT BLUE FACTORY ARM

PULSE AFTER START ( - )

LT GREEN/BLACK FACTORY DISARM

PULSE BEFORE START ( - )

2 Pin Door Lock Harness

BLUE UNLOCK

(-)

GREEN LOCK

(-)

Pin Main Harness

GRAY/RED PARKING BRAKE INPUT

(-)

Locate the vehicle's parking brake wire.

Verification: This wire will register ground when the vehicle's PARKING

BRAKE is engaged.

NOTE: The following connection

required for Manual

Trans~ission

Mode.

2 PURPLE DOOR TRIGGER INPUT ( + )

Locate the vehicle's dome light or door pin switch wire.

Verification: This wire will register positive voltage (POS) when the door is

opened and the interior light is on. This wire will

"0" Volts when the door is closed and the interior light is

off.

Connect the PURPLE wire to the vehicle's positive door input wire(s).

NOTE:

Certain vehicles may require multiple connections. Refer to vehicle

application guide.

GREEN DOOR TRIGGER INPUT ( - )

Locate the vehicle's dome light or door pin switch wire.

Verification:

This wire will register ground (NEG) when the door is opened

and the interior light is on. This wire will register positive voltage when the

door

closed and the interior light

off.

Connect the GREEN wire to the vehicle's negative door input wire(s).

NOTE: Certain vehicles may require multiple connections. Refer to vehicle

application guide.

BLACK/WHITE ILLUMINATED ENTRY OUTPUT

(-)

This wire provides a ( - ) 200mA output for 30 seconds when the system is disarmed

capable

driving relays.

Locate the vehicle's dome light or pin switch wire.

Verification:

This wire will register positive voltage or ground when the

vehicle's dome light is turned ON.

BROWN/BLACK HORN OUTPUT ( - )

Locate the vehicle's horn wire.

Verification:

This wire will register at positive voltage and register

ground when the horn switch is pressed.

Connect the BROWN/BLACK wire to the vehicle's horn wire. This is a low current

output, 200mA.

RED/WHITE TRUNK RELEASE OUTPUT ( - )

Locate the vehicle's trunk release wire at the trunk release switch.

Verification:

This wire will register either positive voltage

ground when

the trunk release

activated.

This

a low current output, 200mA and is configurable

option programming.

ca5554 Install rev A

7 BLUE/BLACK START STATUS I ACTIVE OUTPUT ( - )

This wire provides a ground output when the remote start function is activated and

remains until 4 seconds after the remote start

shutdown. If this wire will be used

for multiple application's a 1 amp diode is required in-line with the stripe facing the

control module.

PURPLE/WHITE TACH INPUT

Locate the vehicle's ignition coil or fuel injector

the engine compartment.

Verification: Test using the following procedure:

Set voltmeter to AC VOLTS.

Attach positive lead

a volt meter to a constant 12-volt source.

Attach negative lead

a volt meter to the wire to be tested.

Start the engine.

Have someone press on the gas pedal slightly as you monitor the meter. If

connected to the correct wire, the voltage reading will increase as the engine's

RPM increases.

Connect the PURPLE/WHITE wire to the negative side

the vehicle ignition coil

fuel injector.

9 GRAY HOOD

INPUT ( - )

Install a Hood Pin Switch and connect to the GRAY wire. This connection is required

for Remote Start.

Verification: This wire when connected will register ground when the

vehicle's hood

opened.

Connect the GRAY wire to the hood pin.

NOTE: Be sure to loom the wire, and seal the grommet.

0 BROWN/RED BRAKE INPUT (

+ )

Locate the vehicle's brake light wire at the brake pedal mounted switch. This

connection

required for Remote Start.

Verification: This wire registers positive voltage when the brake pedal is

pressed.

Connect the BROWN/RED wire to the vehicle's brake light wire.

VIOLET/BLACK AUX 1

This wire provides a

(-)

200mA output capable ofdriving relays. For Control

optional accessories (i.e. Power Window/Sunroof, etc.).

activate refer to the transmitter button configuration chart. Please refer to the

selectable options for timing.

3 Pin Parking Light Harness

BLACK GROUND

Connect the BLACK wire to a solid chassis ground point using a ring terminal and

self tapping screw (not supplied). Scrape away paint from the grounding point to

ensure a good connection. The recommended grounding point

a metal surface

the driver's side kick panel area.

NOTE: Do not ground the BLACK wire with any other vehicle components.

WHITE/RED PARKING LIGHT INPUT

WHITE PARKING LIGHT OUTPUT

Locate the parking light output wire at the vehicle's light switch.

Verification:

This wire registers positive voltage when the parking lights are

turned on.

Positive switching Parking Lights:

Connect the WHITE/RED wire to a 15 Amp max fused battery source.

Connect the WHITE wire to the parking light output wire.

Negative switching Parking Lights:

Connect the WHITE/RED wire to a good chassis ground.

Connect the WHITE wire to the parking light output wire.

ca5554 Install rev A

6 Pin Start Harness

1 PURPLE STARTER

OUTPUT

( + )

Locate the vehicle starter wire.

Verification: This wire registers voltage onlywhen the key is turned

the

START position.

Verification: The starter wire registers voltage when the

key

is turned to the

START position.

Connect the PURPLE wire to the vehicle starter wire.

2 RED BATTERY

12V

(

Locate 1

the vehicle's constant 12 Volt battery wires

the ignition switch.

Verification: This wire will register ( + ) voltage in all positions

the ignition

switch.

Connect

the

RED wire to the constant 12 Volt battery wire.

NOTE:

Remove

all fuses until all connections are made.

ORANGE

ACCESSORY

1 ( + )

Locate the vehicle's accessory wire at the ignition switch.

Verification: This wire registers voltage when the key is turned to

ACC

(Accessory) and the ON (or RUN) position.

The

voltage

drops

out

when

the

key is turned to the START (or CRANK) position.

Connect the

ORANGE

wire to the vehicle's accessory wire.

Programmable output: IGN, ACC, Start.

4 PINK/WHITE IGNITION 2 ( + )

Locate the vehicle's 2nd ignition wire at the ignition switch (if equipped).

Verification: This wire registers voltage

when

the key is turned to

the

(or

RUN) position, but not the

ACC

(Accessory) position.

The

voltage

does

not

drop

out

when the key is turned to the START (or

CRANK)

position.

Connect

the

PINK/WHITE wire to the vehicle's ignition 2 wire.

Programmable output: IGN, ACC, Start.

5 RED/WHITE BATTERY 12V (

Locate 1

the vehicle's constant 12 Volt battery wires at the ignition switch.

Verification: This wire will register ( + ) voltage in all positions

the ignition

switch.

Connect the RED/WHITE wire to the constant 12 Volt battery wire.

NOTE:

Remove all fuses until all connections are made.

6 PINK IGNITION 1 ( + )

Locate the vehicle's ignition wire at the ignition switch.

Verification: This wire registers voltage when the key is turned to the ON (or

RUN) position. The voltage does not drop out when the key is turned to the

START (or CRANK) position.

Connect the PINK wire to the vehicle's Ignition wire.

This wire is also used for Ignition 1 Output.

4 Pin Alternate Harness

1 BLACK/YELLOW PULSE DURING

CRANK

(-)

Locate the vehicle's second starter (crank) wire at the ignition switch. (if equipped)

Verification: This wire registers voltage only in the start (crank) position

the ignition switch.

This wire will supply a

(-)

200mAoutput and can be configured in option

programming.

2 GREEN/WHITE PULSE

AFTER

SHUTDOWN

( - )

This wire will supply a

(-)

200mA pulse after the remote start shuts down. This

is typically used to re-lock the vehicle's doors ifthey unlock upon remote start

shutdown. It can also be used to pulse a

door

pin-switch wire to prevent the vehicle's

accessories from remaining on after remote start shutdown.

This output is configurable in option programming.

ca5554 Install rev A

Other manuals for ca5554 Professional series

Table of contents

Other Code Alarm Remote Starter manuals

Code Alarm

Code Alarm CA 411 User manual

Code Alarm

Code Alarm CSI-100 User manual

Code Alarm

Code Alarm ca5153 User manual

Code Alarm

Code Alarm ca6554 User manual

Code Alarm

Code Alarm PROFESSIONAL SERIES User manual

Code Alarm

Code Alarm Professional Series CA 4050 User manual

Code Alarm

Code Alarm PC 7600 User manual

Code Alarm

Code Alarm CA-520A User manual

Code Alarm

Code Alarm CA2LCD5 User manual

Code Alarm

Code Alarm CA 4055 User manual

Code Alarm

Code Alarm CA 5051 User manual

Code Alarm

Code Alarm CA 5150 User manual

Code Alarm

Code Alarm PC 4400 User manual

Code Alarm

Code Alarm CA 2050 User manual

Code Alarm

Code Alarm CA 521 User manual

Code Alarm

Code Alarm CA 440SS User manual

Code Alarm

Code Alarm CA 1055 User manual

Code Alarm

Code Alarm ca 4552 User manual

Code Alarm

Code Alarm Professional ca5054 User manual

Code Alarm

Code Alarm ca4B5 User manual

Code Alarm

Code Alarm ca6554 User manual

Code Alarm

Code Alarm CA 4051 User manual

Code Alarm

Code Alarm CA-630 User manual

Code Alarm

Code Alarm CA1BTW5 User manual

Popular Remote Starter manuals by other brands

AstroStart

AstroStart 803U user manual

Durite

Durite 0-649-20 Leaflet

EINHELL

EINHELL BT-PS 1000 Directions for use

Linear

Linear ACCESS AK-21 Installation and programming instructions

Soundstream

Soundstream TARANTULA RS.2 installation guide

Jaycar Electronics

Jaycar Electronics MB3752 instruction manual

Ultra Start

Ultra Start 72 Series owner's manual

ADS

ADS FLASHLOGIC FLRSVW1 Product guide

Selecta

Selecta JS012 instruction manual

Black Widow Security

Black Widow Security BW RAS 400 installation manual

Vector

Vector Power City DK080706 Owner's manual & warranty

Ozito

Ozito OJS-800 instruction manual

Profi-Partner

Profi-Partner 46387 instruction manual

EZ STARTER

EZ STARTER EZ-45 user guide

Viper

Viper 4204 owner's guide

Essex Electronics

Essex Electronics KE-1701 user guide

EINHELL

EINHELL EGS 3600 Directions for use

Rooboost

Rooboost RB-1750WP user manual

Code Alarm ca5554 Professional series User manual

Popular Remote Starter manuals by other brands