Cobra 02-6468 User manual

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

www.cobrausa.com

11/08 ®

*Cobra®recommends you always wear a helmet while riding. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

Items Supplied >

1 –Set Of Plated Saddle Bag Supports

2 –M8 x 30mm Button Head Bolts

2 –M8 x 35mm Button Head Bolts

2 –Spacer, Short .200” Short

2 –Spacer, Long .500” Long

Application(s) >

Kawasaki VN900 06-14

Instruction Manual >

Your saddlebag supports will install in just a few minutes using common tools. Read all instructions

carefully and completely before installing your new saddlebag supports.

1. Remove your stock fender rail bolts on left side.

2. Place the supplied spacers and stock fender isolator bushings in the recessed holes on the fender rails (large spacer to the

front, small spacer to the rear.)

3. Install your Cobra saddlebag supports using the supplied button head bolts (where the stock bolts were removed) the

saddlebag supports should hang towards the rear and away from the motorcycle. Repeat on right side.

4. Torque bolts to factory specifications.

Note: If using Cobra sissy bar mount the saddlebag supports over the sissy bar brackets and do not use supplied spacers.

02-6468

DOCUMENT NO. 0019 REV. A

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

www.cobrausa.com

11/08 ®

*Cobra®recommends you always wear a helmet while riding. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

Items Supplied >

1 –Set Of Plated Saddle Bag Supports

2 –M8 x 30mm Button Head Bolts

2 –M8 x 35mm Button Head Bolts

2 –Spacer, Short .200” Short

2 –Spacer, Long .500” Long

Application(s) >

Kawasaki VN900 06-14

Instruction Manual >

Your saddlebag supports will install in just a few minutes using common tools. Read all instructions

carefully and completely before installing your new saddlebag supports.

1. Remove your stock fender rail bolts on left side

2. Place the supplied spacers and stock fender isolator bushings in the recessed holes on the fender rails (large spacer to the

front, small spacer to the rear.)

3. Install your Cobra saddlebag supports using the supplied button head bolts (where the stock bolts were removed) the

saddlebag supports should hang towards the rear and away from the motorcycle. Repeat on right side.

4. Torque bolts to factory specifications.

Note: If using Cobra sissy bar mount the saddlebag supports over the sissy bar brackets and do not use supplied spacers.

02-6468

DOCUMENT NO. 0019 REV. A

Table of contents

Popular Motorcycle Accessories manuals by other brands

SRC

SRC B-TRK502-01-01-SL quick start guide

3M Speedglas 9100 MP operating instructions

hepco & becker

hepco & becker 6307520 00 01 manual

HOMCOM

HOMCOM AA0-077 user manual

hepco & becker

hepco & becker 6307558 00 01 manual

Wunderkind Custom

Wunderkind Custom 106503-F15 Installation and safety

Dräger

Dräger HPS 3500 Instructions for use

M-WAVE

M-WAVE SKI manual

Kuryakyn

Kuryakyn 6212 installation instructions

hepco & becker

hepco & becker 6507504 00 01 installation instructions

Tool it

Tool it PROMAX LCD 9.13G manual

Custom Dynamics

Custom Dynamics TruWrapz installation instructions

Roof

Roof RO200 CARBON How to use and maintain

Kabuto

Kabuto Japan IBUKI instruction manual

PUIG

PUIG 5051 Mounting instructions

rizoma

rizoma ZTH050 user manual

Joubert

Joubert 10001711 instruction manual

Sperian

Sperian Optrel p420 manual