ClimateMaster ATA32V01 Original instructions

Controls Single or Dual Stage

Geothermal Heatpump Systems with strip heat

Up to 3-heat & 2-cool

ATA32V01

• Dual Setpoint

• Large, Easy To Read

Display

• Thermoglow™ Backlight

• Auto-Changeover

• No batteries required

• Locking Keypad

Owner’s Manual &

Installation Instructions

Table of Contents

Front Panel ........................................................................2

Display ................................................................................3

Wiring Diagrams ..............................................................5

Quick Start - Setting the Clock ...............................6

Selecting The Heat or Cool Mode ..........................7

Basic Operation ...............................................................8

Advanced Setup ..............................................................9

Advanced Setup Table ..................................................12

About Advanced Features & Operation ................13

Warranty ............................................................................19

Follow Installation Instructions carefully. Disconnect

Power to your heatpump before removing the old

thermostat and installing the new thermostat.

CAUTION

IMPORTANT

Front Panel

1 Liquid Crystal Display

with Thermoglow™

2 Up/Down Buttons

3 Mode Button

4 Fan Button

5Heat or Cool Indicator

Red = Heat, Green = Cool

1Mode Indicators - Page 7

Selects the operational mode of the equipment.

HEAT - Indicates the heating mode.

COOL - Indicates the air conditioning mode.

AUTO - Indicates the system will automatically

changeover between heat and cool modes

as the temperature varies.

OFF - Indicates heating and cooling are turned o.

2Clock with Day of the Week - Page 6

Indicates the current time and day.

3Room Temperature Display

Indicates current room temperature.

4Desired Set Temperature - Page 8

Indicates desired room temperature(s).

Display

Fan On

SuMoTuWeThFrSa Setup

Locked

1 3

4 2

Fan On

SuMoTuWeThFrSa Setup

Locked

5 Setup icon - Pages 9-12

Indicates the thermostat is in the setup mode.

6 Fan On icon - Page 8

Indicates constant, continuous fan operation.

When Fan On is not lit - indicates the fan will only operate

when necessary to heat or to cool.

7 Locked icon - Page 18

Indicates the keypad has been locked.

Display

Wiring Diagrams

Single Stage Unit, CXM

Two Stage Unit, DXM

R G Y1 W O Y2 C

AL1

AL2

Aﬁgure 1

R G Y1 W O Y2 C

O/W2

AL1

ﬁgure 2

Quick Start Setting the Clock

How to Change Settings in the Setup Screens

To enter the setup screens, press the MODE button, and

simultaneously press FAN button for 2 seconds. Release the buttons

when you see “Setup” on the display. Use the WARMER or COOLER

buttons to adjust the value of your selection. Press MODE to advance

to the next setup step. Press MODE and FAN together again to leave

the setup screens.

Setting the Clock and Day: Setup Steps 1 & 2

To set the time and day; enter the setup screens by pressing the MODE

button and simultaneously pressing the FAN button for 2 seconds.

During Setup & Programming: Pressing the UP or DOWN buttons will

modify the ﬂashing selection.

Tip: To change hours quickly, press and hold the FAN button and press the UP or

DOWN buttons.

The thermostat is preprogrammed from the factory to operate one or two

stage equipment without the need for further programming. To optimize

the installation of this thermostat, follow the instructions in the Advanced

Setup section.

FANMODE

press together for

2 seconds

Quick Start Selecting the Heat or Cool Mode

Select Mode by Pressing the MODE Button

Heating Only

The HEAT setting indicates the

temperature the room has to reach

before the furnace will turn on to heat the room.

Cooling Only

The COOL setting indicates the temperature

the room has to reach before the air conditioner

will turn on to cool the room.

Heating or Cooling

AUTO will automatically select heat or cool based

on room temperature demand.

O

OFF indicates both heating and air conditioning

systems are turned o.

MODE

Basic Operation

Selecting Your Desired Temperature (adjusting the setpoints)

AUTO MODE

Pressing the UP or DOWN buttons in Auto

will adjust both the heat and cool set

temperatures simultaneously.

HEAT OR COOL MODE

Pressing the UP or DOWN buttons in Heat

OR Cool mode will adjust only the heat

OR cool set temperature.

USING THE FAN BUTTON

Fan On indicates constant fan operation.

You may turn the fan on even if the ther-

mostat is in the O mode. Pressing the

FAN button toggles this feature on or o.

Fan On

FAN

Advanced Setup

Press the MODE button. While holding MODE,

press the FAN button for 10 seconds to

enter setup screens.

Pressing the FAN button while holding in the MODE button for 2 seconds

will bring up the Clock Set screen on the display. Continuing to hold both

buttons in for an additional 8 seconds will allow access to the Advanced

Setup Steps that follow the Clock Set steps. It is important to note the

display will not change and will look the same whether it is in Clock Set or

Clock Set plus Advanced Setup.

MODE FAN

NOTE: Each step# is located at the top right corner of the display

for easy reference.

Adjust the time of day clock by using

the UP and DOWN buttons.

TIP: To change hours quickly, press and

hold the FAN button and press the UP

and DOWN buttons.

Select the day of the week by using the

UP and DOWN buttons.

Setup

Table of contents

Other ClimateMaster Thermostat manuals

ClimateMaster

ClimateMaster ATC32U01 iGate User manual

ClimateMaster

ClimateMaster ATP32U03 User manual

ClimateMaster

ClimateMaster CM500 Series Original instructions

ClimateMaster

ClimateMaster iGate ATC32U02 User manual

ClimateMaster

ClimateMaster ATC32U01 iGate Assembly instructions

ClimateMaster

ClimateMaster iGate ATC32U03 User manual

ClimateMaster

ClimateMaster ATC32U01 iGate User manual

ClimateMaster

ClimateMaster iGate 2.0 User manual

ClimateMaster

ClimateMaster AVB32V03R Original instructions

ClimateMaster

ClimateMaster ATP32U01 User manual

ClimateMaster

ClimateMaster CM300 Series Original instructions

ClimateMaster

ClimateMaster iGate ATC32U02 Assembly instructions

ClimateMaster

ClimateMaster Trilogy Q-Mode (QE) Series User manual

ClimateMaster

ClimateMaster iGate ATC32U02 User manual

ClimateMaster

ClimateMaster ET Series Assembly instructions

ClimateMaster

ClimateMaster ATC32U01 iGate User manual

ClimateMaster

ClimateMaster ATA11U03 User manual

ClimateMaster

ClimateMaster iGate 2.0 User manual

ClimateMaster

ClimateMaster ATA11H01 User manual

ClimateMaster

ClimateMaster iGate AWC99U01 Owner's manual

ClimateMaster

ClimateMaster ATM11C11 Installation and user guide

ClimateMaster

ClimateMaster ATP32U03 User manual

ClimateMaster

ClimateMaster AVB32V02R Original instructions

ClimateMaster

ClimateMaster Trilogy Variable (VE) Series Guide

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide