Clearfield StreetSmart User manual
StreetSmart Small Count Fiber Hand-Off Box
Installation Manual ______________________________________________________
Manual 021728 REV A - Aug 2020
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
2
StreetSmart Small Count Fiber Hand-Off Box
Installation Manual _________________________________________________________
Manual 021728 REV A - Aug 2020
Table of Contents
Application 3
Description 3
Technical Specications 3
Congurations 4
Opening the Box 5
Installing MPO Feeder Cables 5
Installing Drop Cables 8
Mounting 10
Connector Cleaning Procedure 13
Standard Warranty 18
Proprietary Notice 19
Technical Support 19
3
StreetSmart Small Count Fiber Hand-Off Box
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 021728 REV A - Aug 2020
Application
Technical Specications
StreetSmart Small Count Fiber Hand-Off Box
Dimensions 8” H x 8” W x 3” D
Box Option Plug-and-play or patch only
Connector Types SC/APC, SC/UPC, LC/UPC, LC/APC, MPO or HMFOC
Cable Entrance Single entrance for both provider and network
Cable Grommet FLATdrop or 4.8m
Labeling Designation label on door
Mounting Options Pole, Wall or Aerial
The StreetSmart Small Count Fiber Hand-Off Box serves as
a network demarcation point between the backhaul; provid-
er to a network operator or as point demarc point for small
count MDUs. Designed with a hinged plate and 216 locking
mechanism, access is secured between craft responsibilities.
The craft-friendly GR-771 box can be mounted aerial, pole or
wall. The compact design makes it ideally suited for inside a
monopole.
Description
The StreetSmart Small Count Fiber Hand-Off Box can be
congured in either 6 or 12 terminations in both SC or LC con-
nections. The StreetSmart Small Count Hand-Off Box comes
in two conguration. The plug-and-play option utilizes an MPO
or HMFOC (hardened multiber optical connector) connector
or the patch only which comes with factory installed cable in
length up to 3000’. Designed with a tethered removable door,
lay in grommet, angled adapter for easy cleaning and testing
and no special tool requirements, makes the box extremely
craft-friendly.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
4
StreetSmart Small Count Fiber Hand-Off Box
Installation Manual _________________________________________________________
Manual 021728 REV A - Aug 2020
Congurations
MPO Feeder
HMFOC TetheredBlunt/Stubbed
5
StreetSmart Small Count Fiber Hand-Off Box
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 021728 REV A - Aug 2020
Opening the Box
To open the Small Count Fiber Hand-Off Box and access the
top (wireless) compartment, use a standard can wrench or 7/16”
socket. The interior swinging bulkhead must also be unlocked
using a 7/16” socket to access the lower (wireline) compartment.
Installing MPO Feeder Cables
To install cables into the wireline compartment, rst remove the cable retention grommet plate1.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
6
StreetSmart Small Count Fiber Hand-Off Box
Installation Manual _________________________________________________________
Manual 021728 REV A - Aug 2020
2. Remove the cable retention
grommet.
3. Remove the v-clamp from the top of the
toothed bracket at the entrance.
4.
5.
Cut the cable retention
grommet at the locations
where cables will be
installed.
Install the cable(s) into the
cable retention grommet,
slipping them in through
the side where you cut the
grommet.
7
StreetSmart Small Count Fiber Hand-Off Box
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 021728 REV A - Aug 2020
Insert the cable retention grommet back
into the slot on the wall box.
Reinstall the v-clamp, securing it in place
with the two screws and allowing the
edges of clamp to grab the jacket of the
cable(s).
6.
7.
Reinstall the cable retention grommet
plate, securing it in place with the two
screws.
8.
Inspect, clean if necessary, and connect
the MPO into the pre-installed MPO adapt-
er on the bottom of the swinging bulkhead
9.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
8
StreetSmart Small Count Fiber Hand-Off Box
Installation Manual _________________________________________________________
Manual 021728 REV A - Aug 2020
Installing Drop Cables
To install cables into the wireless compartment, rst remove the cable retention grommet plate.1.
Remove the cable retention grommet.
2.
Remove the v-clamp from the top of the toothed
bracket at the entrance.
3.
9
StreetSmart Small Count Fiber Hand-Off Box
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 021728 REV A - Aug 2020
Cut the cable retention grommet at the locations where cables will be installed.
Install the cable(s) into the cable retention grommet, slipping them in through the side where you cut the grommet.
4.
5.
Insert the cable retention grommet back into the slot on the wall box.
Reinstall the v-clamp, securing it in place with the two screws and allowing the edges of clamp to grab the jacket of
the cable(s).
6.
7.
Reinstall the cable retention grommet plate,
securing it in place with the two screws.
8.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
10
StreetSmart Small Count Fiber Hand-Off Box
Installation Manual _________________________________________________________
Manual 021728 REV A - Aug 2020
Route the incoming ber up and around the radius
rod. Transition the ber up onto the top of the swinging
bulkhead.
Inspect, clean if necessary, and then connect the ber
into the designated adapter.
Utilize the two tie-down points and the provided velcro
to form a loop to secure the bers on top of the bulk-
head.
9.
10.
11.
Mounting
Four mounting locations are present on the base of the hand-off box. These will be utilized to install the box to the mounting
bracket, in wall, pole, and aerial mount applications.
Table of contents
Other Clearfield Network Hardware manuals
Clearfield
Clearfield CraftSmart FiberFirst User manual
Clearfield
Clearfield FieldSmart 96 Port PON User manual
Clearfield
Clearfield StreetSmart Aerial User manual
Clearfield
Clearfield WaveSmart Circulator User manual
Clearfield
Clearfield Home Deployment Kit User manual
Clearfield
Clearfield FieldSmart User manual
Clearfield
Clearfield FieldSmart FiberFlex 2000 User manual
Clearfield
Clearfield CleanKit-LC-01 User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
