Claypaky VOLERO BATTEN AQUA User manual

IN TRUCTION MANUAL

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

INDEX

ENGLI H

Page Contents

2 1. afety information

3 2. Unpacking and preparation

3 3 Installation and start-up

3 3.1 Fixture overview

4 3.2 nstalling the fixture

6 3.3 Connecting to mains supply

6 3.4 Connecting the control signal line: DMX / Art-Net

7 3.5 Switching on the fixture and basic SetUp

8 4. Maintenance

8 4.1 Fuses replacing

9 4.2 Periodical cleaning & Caution

10 4.3 Battery removal

11 5. Dimensions

11 6. Cause and solution of problems

CL3002

VOLERO BATTEN AQUA

AFETY INFORMATION

MPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link:

www.claypaky.com

Ref: F S02F - Safety nformation Volero Batten Aqua

INFORMAZIONI DI ICUREZZA

MPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link:

www.claypaky.com

Rif: F S02F - Safety nformation Volero Batten Aqua

INFORMATIONEN ZUR ICHERHEIT

W CHT G: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:

www.claypaky.com

Ref: F S02F - Safety nformation Volero Batten Aqua

INFORMACIONE DE EGURIDAD

MPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

www.claypaky.com

Ref: F S02F - Safety nformation Volero Batten Aqua

CON IGNE DE ÉCURITÉ

MPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à

ce produit, disponibles en version digitale au lien suivant:

www.claypaky.com

Réf. : F S02F - Safety nformation Volero Batten Aqua

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекоменд ет внимательно прочитать и сохранить инстр кцию по технике безопасности

данного изделия, которая всегда дост пна в электронном формате по след ющей ссылке:

www.claypaky.com

Наименование: F S02F - Safety nformation Volero Batten Aqua

1. AFETY INFORMATION

VOLERO BATTEN AQUA

Packing contents - Fig. 1

2. UNPACKING AND PREPARATION

Neutrik PowerCON

TRUE1 (IN/OUT)

LCD Display

Functional buttons

5pin DMX IN/THRU

Ethernet

Safety loop

Fuse

Anti-moisture valve

Basament

align pin

W-DMX Antenna

Tilt lock

Frost lock holder

3. IN TALLATION AND TART-UP

3.1 Fixture overview

Continue ‘

VOLERO BATTEN AQUA

Projector installation - Fig. 3

The projector can be installed on the floor resting on specific rubber feet, on a truss, on the ceiling or wall.

WARNING: the safety chains must be installed except when the projector rests on the floor. (Code 2x 105041/801 available upon request).

This must be secured to the projector support structure and then hooked to the two fastening points.

3.2 Installing the fixture

VOLERO BATTEN AQUA

Continue ‘

Floor Line array connection - Fig. 4

VOLERO BATTEN AQUA

3.3 Connecting to mains supply

Connections to the power mains - Fig. 6

Power Supply

Connecting and disconnecting the power cord - Fig. 5

DMX 512

SIGNAL

SCREEN

DMX 512

5 PIN

SIGNAL

Ethernet

Connections to the control signal line (DMX) - Fig. 7

Use a cable conforming to specifications E A RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. End connections must be made using XLR type 5-pin male/female

connectors. A terminating plug must be inserted on the last projector with a resistance of 120 (minimum 1/4 W) between terminals 2 and 3.

IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the shield

braid and pin 1 of the connectors.

MA NS OUT

Max 100-240V

Max 3.3-8A

3.4 Connecting the control signal line: DMX / Art-Net

VOLERO BATTEN AQUA

Continue ‘

witching on the projector - Fig. 8

Switch-on the fixture. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Volero Batten Aqua Firmware Dmx

version: ...... address: ......

On conclusion of resetting in case of absence of the dmx signal, Tilt move to the “Home” position (Tilt 128 bit). The control panel (Fig. 7) has a display

and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions: rest status and setting

status. When it is in the rest status, the display shows the projector’s DMX address.

During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.

t should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

key will be cancelled.

Dmx Address

Warning Message

3.5 witching on the fixture and basic etUp

Reversal of the display - Fig. 9

To activate this function, press UP

and DOWN

keys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

etting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

The address can also be set with the projector switched off.

Functions of the buttons - Using the menu

Confirms the displayed value, or activates the displayed function, or enters the successive

menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

ncreases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level.

Commute from units, tens, hundreds, in the "Address", "Fixture D" and "Calibration" menù.

DOWN

LEFT

R GHT

VOLERO BATTEN AQUA

Fuse replacing - Fig. 10

Each Volero Batten Aqua has 1 fuse 10AT 250V, associated with the main power cord connection.

10AT 250V

4. MAINTENANCE

4.1 Fuses replacing

etting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.

All that is needed is to press

R GHT

to momentarily activate the display and thus access the settings. Once the required operations have been

carried out, the display will switch off again after a wait time of 30 seconds.

U ING THE MENU:

1) Press LEFT

once – “Main Menu” appears on the display.

2) Use the UP

and DOWN

keys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• nformations ( nformations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.

3) Press

to display the first item in the selected menu.

4) Use the UP

and DOWN

keys to select the MENU items.

VOLERO BATTEN AQUA

WARNING:

no alcohol

WARNING

- P66 fixture

- Failure to completely remove power from fixture prior to servicing can lead to serious injury or death.

For additonal service information please contact service@claypaky.it

IMPORTANT

The screws to be removed have rubber sleeve gaskets at the threaded end of the screw. DO NOT LOOSE these. They must be reinstalled when

reassembly is done. f these rubber sleeve gaskets are damaged, they must be replaced with exact original equipment (OE) parts, we also suggest to

replace the rubber sleeve gasket every 2 years.

To maintain P66 rating each cover has rubber gasket on it. f any rubber gasket is lost or damaged, it must be replaced by an original equipment

(OE) part. We also suggest to replace the rubber sleeve gasket every 2 years.

CAUTION:

•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The

frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of

the working environment (air humidity, presence of dust, salinity, etc.).

t is recommended that the projector undergoes an annual service by a qualiﬁed technician for special maintenance involving at least the following operations:

- General cleaning of internal parts.

- Restoring lubrication of all parts subject to friction, using lubricants speciﬁcally supplied by Claypaky.

- General visual check of the internal components, cabling, mechanical parts, etc.

- Electrical, photometric and functional checks; eventual repairs.

Cleaning the lenses

Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WARN NG: the use of alcohol or any other

detergent could damage the lenses).

4.2 Periodical cleaning & Caution

Parts requiring frequent cleaning.

Light collimation system

This product contains internal light

collimation system. Avoid intense

light from any angle.

VOLERO BATTEN AQUA

This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the

regulation in force.

4.3 Battery removal

This manual suits for next models

Table of contents

Other Claypaky Lighting Equipment manuals

Claypaky

Claypaky HY B-EYE K15 User manual

Claypaky

Claypaky ALPHA BEAM 1500 User manual

Claypaky

Claypaky HY B-EYE K25 TEATRO User manual

Claypaky

Claypaky ALPHA PROFILE 700 User manual

Claypaky

Claypaky ALPHA SPOT QWO 800 User manual

Claypaky

Claypaky MINI-B SPOT User manual

Claypaky

Claypaky STAGE COLOR 300 AE User manual

Claypaky

Claypaky ALPHA PROFILE 800 ST User manual

Claypaky

Claypaky C61044 User manual

Claypaky

Claypaky Odeon Flood Series User manual

Claypaky

Claypaky Arolla Spot MP User manual

Claypaky

Claypaky MINI XTYLOS HPE Operation manual

Claypaky

Claypaky IGLOO - C61195 User manual

Claypaky

Claypaky Sharpy User manual

Claypaky

Claypaky ALPHA WASH 700 User manual

Claypaky

Claypaky ALPHA SPOT HPE 1500 User manual

Claypaky

Claypaky A.LEDA WASH K10 User manual

Claypaky

Claypaky ALPHA SPOT HPE 300 User manual

Claypaky

Claypaky ALPHA SPOT HPE 1500 User manual

Claypaky

Claypaky C61365 User manual

Claypaky

Claypaky VIP 1200 User manual

Claypaky

Claypaky C71050 User manual

Claypaky

Claypaky VOLERO WAVE User manual

Claypaky

Claypaky A.LEDA WASH K5 C61401 User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions