Claudgen ScreenZone CA2015S User manual

18280309 Iss 06

All electrical appliances produced by the Company are guaranteed for one year against faulty

materials or workmanship. This applies only if the appliance has been used for purposes in

accordance with the instructions provided and has not been connected to an unsuitable

electricity supply, or subject to misuse, neglect, damage or modified or repaired by any person

not authorised by us. This guarantee is offered to you as an extra benefit and does not affect your

legal rights.

The correct electricity supply voltage is shown on the rating label attached to the appliance.

Reasonable care has been taken to ensure that this guide is accurate at the time of printing.

In the interest of progress the Company reserve the right to vary specifications from time to time

without notice.









 















18280309 Iss 06



1 General Information

1.1 Warnings

1.2 Health and Safety

1.3 Electrical Supply

1.4 Location

1.5 Clearance Distance

1.6 Standards

2 Introduction

2.1 Introduction

2.2 Mechanical switch

2.3 Touchscreen controller

3 Dimensions & fixing locations

3.1 Dimensions

3.2 Fixing location

4 Technical Specification

4.1 Specification

5 Wiring Details

5.1 Installer Wiring

5.2 Factory Wiring

5.3 Network Wiring - Controller

5.4 Network Wiring - Switches

6 Modifying the heater to single phase operation

7 Installation Details

8.1 Screw location for grille removal

8.2 Mounting

8.3 Electrical Supply

8.4 Installation

8 Fault detection and LEDs

8.1 Installer Wiring

8.2 Overheat protection reset

9 BMS Connection MODBUS Protocol

10.1 BMS Connection

10.2 MODBUS Protocol

10 Touchscreen Controller Operation

11.1 Main Screen

11.2 Setting menu

11.3 Time

11.4 Lock

11.5 Timer

11.6 Timer - time schedule

11.7 External switches

11.8 Operating Mode selection

11.9 Manual Mode

11.10 Autoomatic Mode

11.11 Temperature Mode 1

11.12 Temperature Mode 2

11.13 Energy usage

11.14 Identification

18280309 Iss 06

1.1 Warnings

All installations must be in accordance

with the regulations. These instructions

must be handed to the user on comple-

tion of the installation. Installers and ser-

vice engineers must be able to demon-

strate competence and be suitably

qualified in accordance with the regula-

tions. To ensure continued and safe op-

eration it is recommended that the ap-

pliance is serviced annually. The air cur-

tain outlet/inlet grille must not be ob-

structed during use. Any modifications

made to the unit not approved by Con-

sort will void manufacturers warranty and

potentially create a hazard. The appli-

ance is NOT intended for use by persons

(including children) with reduced physi-

cal, sensory or mental capabilities or lack

of experience or knowledge unless they

have been given instruction concerning

use of the appliance by a person re-

sponsible for their safety. Children should

be supervised to ensure that they do not

play with the appliance. Parts of the

heater can become very hot when in

operation and cause burns. The heater is

not equipped with room thermostat and

should not be used in small rooms so as

to avoid overheating.

1.2 Health and Safety

Please read this instructions thoroughly before

installing the appliance. Sole liability rests with the

installer to ensure that all site safety procedures

are adhered to during installation. Sole liability

rests with the installer to ensure that protective

safety wear such as hand, eye, ear and head

protection is used during installation of the prod-

uct. Ensure that all anchoring points are suitable

for the weight of the appliance.

1.3 Electrical Supply

This heater must be permanently connected to

the electricity supply via an isolated switch. It

must provide all-pole disconnection and have a

3mm gap on each pole.

There are no exceptions.

All units must be wired in accordance with I.E.E.

regulations for the Electrical Equipment of

Buildings.

BMS control, time switches and door interlocks

can be installed at the discretion and responsi-

bility of the installer.

Follow section 4 ‘technical specification’ for

more details.

1.4 Location

All units should be installed directly over the

door opening. It is recommended that the air

curtain is installed on the inside of the building.

Care must be taken to allow complete free air

movement into the inlet grilles of the unit to

ensure correct working operation of the air cur-

tain. The discharge opening should be as close

to the top of the door as possible and cover

the entire door width.

Units can be mounted adjacent to each other

to cover the full door opening across wider en-

trances.

1.5 Clearance Distance

It is recommended that a minimum clearance

of 50mm is allowed above the heater. The

clearance allows for cable entry and addition-

al air inlet. It also prevents surfaces overheat-

ing.

The minimum mounting height (floor to grille) is

2m. The maximum mounting height is 3.4m.

1.6 Standards

The heater conforms to the following standards

Electrical Equipment (Safety) Regulations 2016

SI. 2016 1101

Electromagnetic Compatibility Regulations

2016 SI. 2016 No. 1091

Radio Equipment Regulations 2017 SI. 2017

No. 1206

The Ecodesign for Energy Related Products

and Energy Information (Amendment) (EU Exit)

Regulations 2019. SI. 2010 2617

The Restriction of use of Certain Hazardous

Substances. SI. 2012 No. 3032

The Supply of Machinery (Safety) Regulations

2008 (SI 2008/1597)



18280309 Iss 06

2.1 Introduction

This instruction manual describes the Screen-

Zone Commercial range of air curtains. They

are designed for discreet positioning above

the doorways of retail or commercial prem-

ises up to 3.4m ceiling height.

The air curtains comprise multiple modular

blower units 510mm or 615mm wide and

with nominal maximum power output from

4.5kW to 7kW 3Ph 415V.

Models are available in 1.3m, 1.5m and 2m

lengths, made up of 2 or 3 blower units. For

wider doorways, up to 7 air curtains can be

easily interconnected using CAT5/CAT6 RJ45

networking cable.

It is recommended that this control cable is

run separately within its own trunking to

avoid external interference.

The air curtain can be controlled by option-

al Touchscreen controller (not supplied with

the heater) , mechanical switches or BMS.



THIS AIR CURTAIN SHOULD NOT BE

INSTALLED WHERE THERE IS A

OR

.



2.2 Mechanical switch Controller

Each air curtain is supplied with HE8408 me-

chanical switch. More details at Installer wiring

section. This controller will provide 2 fan speed

and 3 heat setting options.

2.3 Optional Color Touchscreen

Controller

Optional Color touch screen controller (not

supplied with the heater) giving options for 8

fan and 8 heat settings can be mounted up to

50m from the air curtain. Optional BMS control,

remote thermostats and door interlocks can be

installed.

The electronic touch screen controller shown

on the picture below allows the user to control

either a single air curtain, or a network of up to

7 air curtains with the same settings.

The controller is designed to be mounted on a

surface double gang back box, and is pow-

ered by an RJ45 connection. The controller will

not fit metal or dry lining back box.

The cable length between the base unit and

the controller can be up to 50 metres.

18280309 Iss 06



 

 

18280309 Iss 06

   

Maximum height M3.4

Door width M1.3 1.3 1.5

Heat medium Electric heating element

Heat output kW 912 9

Fan type 2x EC Crossflow 100mm

Fan control Electronic fan speed control

Heat switching Solid state electronic control

Weight kg 18 18 20



Supply voltage 415V 3ph 50Hz

Total load kW 912 9

Max current per phase A/pha 13 16.5 13

Max motor power W2 x 48 2 x 48 2 x 48

External fuse size amps A/pha 16 20 16

Controller Remote switch or Touch colour screen controller

Controller wiring 4 core 1mm² or CAT5 / CAT6 with RJ45 connectors

Cable terminal size 10mm ²Max

Mains terminal block position Centre of base unit.

Terminals N; L1; L2 & L3

Control terminal position Centre of base unit



Air volume Max speed m³/h1600 1600 1920

Air velocity Max speed @ 0M m/s 6.8

Max speed @ 1M m/s 4.2

Max speed @ 2M m/s 3

Max speed @ 3M m/s 2

Max Delta T Auto speed °C 29 39 26

@ 10°C

Noise level @ 3m Max speed dBA 60

Min speed dBA 50



Length mm 1305 1305 1530

Width mm 205

Height mm 264



18280309 Iss 06

   

Maximum height M3.4

Door width M1.5 1.5 1.5

Heat medium Electric heating element

Heat output kW 12 14 16

Fan type 2x EC Crossflow 100mm

Fan control Electronic fan speed control

Switching type Solid state electronic control

Weight kg 20 20 20



Supply voltage 415V 3ph 50Hz

Total load kW 12 14 16

Max current per phase A/pha 16.5 19.5 22.5

Max motor power W2 x 48 2 x 48 2 x 48

External fuse size amps A/pha 16 20 16

Controller Remote switch or Touch colour screen controller

Controller wiring 4 core 1mm² or CAT5 / CAT6 with RJ45 connectors

Cable terminal size 10mm ²Max

Mains terminal block position Centre of base unit.

Terminals N; L1; L2 & L3

Control terminal position Centre of base unit



Air volume Max speed m³/h1920 1920 1920

Air velocity Max speed @ 0M m/s 6.8

Max speed @ 1M m/s 4.2

Max speed @ 2M m/s 3

Max speed @ 3M m/s 2

Max Delta T Auto speed °C 36 45 52

@ 10°C

Noise level @ 3m Max speed dBA 60

Min speed dBA 50



Length mm 1530 1530 1530

Width mm 205

Height mm 264



18280309 Iss 06

  

Maximum height M3.4

Door width M22

Heat medium Electric heating element

Heat output kW 15 18

Fan type 3x EC Crossflow 100mm

Fan control Electronic fan speed control

Switching type Solid state electronic control

Weight kg 25 25



Supply voltage 415V 3ph 50Hz

Total load kW 15 18

Max current per phase A/pha 16.5 19.5

Max motor power W3 x 48 3 x 48

External fuse size amps A/pha 25 32

Controller Remote switch or Touch colour screen controller

Controller wiring 4 core 1mm² or CAT5 / CAT6 with RJ45 connectors

Cable terminal size 10mm ²Max

Mains terminal block position Centre of base unit.

Terminals N; L1; L2 & L3

Control terminal position Centre of base unit



Air volume Max speed m³/h2400 2400

Air velocity Max speed @ 0M m/s 6.8

Max speed @ 1M m/s 4.2

Max speed @ 2M m/s 3

Max speed @ 3M m/s 2

Max Delta T Auto speed °C 27 39

@ 10°C

Noise level @ 3m Max speed dBA 60

Min speed dBA 50



Length mm 1970 1970

Width mm 205

Height mm 264



18280309 Iss 06





CAT5 cable

Optional external temperature sen-

18280309 Iss 06

 

This manual suits for next models

Table of contents

Other Claudgen Heater manuals

Claudgen

Claudgen Heat-Zone Manual

Claudgen

Claudgen HE7010 Manual

Claudgen

Claudgen CH06CS Manual

Claudgen

Claudgen HE7402RX Original operating instructions

Claudgen

Claudgen HE6137SL Use and maintenance manual

Claudgen

Claudgen HE8515 Manual

Claudgen

Claudgen HE7402 Original operating instructions

Claudgen

Claudgen RCT250SL Use and maintenance manual

Claudgen

Claudgen RAC1509 User manual

Claudgen

Claudgen HE7402RF Manual

Claudgen

Claudgen ScreenZone CA1309S10 User manual

Claudgen

Claudgen ScreenZone CA1514S10 User manual

Claudgen

Claudgen ScreenZone RAC10HL User manual

Claudgen

Claudgen HE8320RX Original operating instructions

Claudgen

Claudgen HE6351 Manual

Claudgen

Claudgen HE7230SL User manual

Claudgen

Claudgen HE7010SL Use and maintenance manual

Claudgen

Claudgen RCT250 Manual

Claudgen

Claudgen ScreenZone HE8409 User manual

Claudgen

Claudgen ScreenZone RAC0603 User manual

Claudgen

Claudgen RAC4500 Manual

Claudgen

Claudgen HE7237 Manual

Claudgen

Claudgen HE7245 User manual

Claudgen

Claudgen HE7230 User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide