Cisco SR224R User manual
USER GUIDE
BUSINESS SERIES
24-Port
10/100 Switch
Model: SR224R
i
24-Port 10/100 Switch
Table of Contents
Chapter 1: Introduction 1
The 24-Port 10/100 Switch. . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chapter 2: Product Overview 3
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Placement Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 3: Connect the Switch 5
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connection Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Appendix A: Specifications 7
Appendix B: Warranty and Regulatory Information 9
Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Industry Canada (Canada) . . . . . . . . . . . . . . . . . . . . . . . . . 12
IC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Règlement d’Industry Canada . . . . . . . . . . . . . . . . . . . . . . 12
EC Declaration of Conformity (Europe) . . . . . . . . . . . . . . . . . 12
Appendix C: Contact Information 21
ii 24-Port 10/100 Switch
About This User Guide
About This User Guide
Icon Descriptions
While reading through the User Guide, you may encounter various icons designed to call
attention to a specific item. Below are descriptions of these icons:
NOTE: This check mark indicates that there is a note of interest and is
something that you should pay special attention to while using the product.
WARNING: This exclamation point indicates that there is a caution or
warning and it is something that could damage your property or product.
WEB: This globe icon indicates a noteworthy website address or e-mail
address.
Online Resources
Most web browsers allow you to enter the web address without adding the http:// in front
of the address. This User Guide will refer to websites without including http:// in front of
the address. Some older web browsers may require you to add it.
Resource Website
Linksys www.linksys.com
Linksys International www.linksys.com/international
Glossary www.linksys.com/glossary
Network Security www.linksys.com/security
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names
are trademarks or registered trademarks of their respective holders.
1
24-Port 10/100 Switch
Chapter 1: Introduction
Chapter 1:
Introduction
The 24-Port 10/100 Switch
With its advanced switching technology, the 24-Port 10/100 Switch will
boost your network performance with much more than just full duplex
data transfer and dedicated bandwidth. It features non-blocking, wire-
speed switching that forwards packets as fast as your network can deliver
them. Address learning and aging are included to prevent data transfer
errors and data flow control to help prevent packet collisions.
The SR224R is designed to fit in a standard equipment rack using the
included rack mount brackets. However, its minimal depth and fanless
design makes it suitable to be located anywhere.
No matter how intensive your network demands, the 24-Port 10/100
Switch has speed, flexibility, and reliability that you can count on.
Features
Ideal for integrating your 10BaseT and 100BaseTX network
hardware
24 10/100 Ports provide dedicated bandwidth in half or full-duplex
modes
Switched 10/100 ports run at up to 200Mbps in full-duplex mode
Each port supports Auto MDI/MDI-X cable detection
Compatible with all major network operating systems
Advanced Store-and-Forward packet switching optimizes data
transfers
Auto partitioning protects PCs from downed network lines
Signal regeneration ensures data transfer integrity
•
•
•
•
•
•
•
•
224-Port 10/100 Switch
Chapter 1: Introduction
3
Chapter 2: Product Overview
24-Port 10/100 Switch
Chapter 2:
Product Overview
Front Panel
The LEDs are located on the front panel of the Switch.
Front Panel of the 24-Port Switch
System (Green) This LED lights up and remains lit when the Switch is
powered on.
1-24 (Green) Each LED lights up when a connection is made through its
corresponding port. It flashes when the corresponding port is active.
1-24 These ports connect the Switch to network devices,
such as computers.
Back Panel
The Ethernet network ports are located on the back panel of the
Switch.
Back Panel of the 24-Port Switch
Power The power port is where you will connect the included
power cord.
Chapter 2: Product Overview
424-Port 10/100 Switch
Side Panel
The security slot is located on the side panel of the Switch.
Side Panel with Security Slot
Security slot The security slot is where you can attach a lock
to protect the Switch from theft.
Placement Options
There are two ways to physically install the Switch:
Set the Switch on its four rubber feet.
Mount the Switch in a standard rack (1U high).
Rack-mount
To rack-mount the Switch, follow these instructions:
The Switch has four mounting holes on each side. Screw an included
mounting bracket into each side.
Rack-mounting the Switch
Lift the Switch into the rack, and secure the brackets with additional
screws (not included).
•
•
1.
2.
5
24-Port 10/100 Switch
Chapter 3: Connect the Switch
Chapter 3:
Connect the Switch
Overview
This chapter will explain how to connect network devices to the Switch.
The application diagram shown here is an example of a typical network
configuration.
Internet
Cable/DSL
Modem Router
Wireless
Access Point
Desktop Notebook Server
Application Diagram
When you connect your network devices, make sure you don’t exceed
the maximum cabling distances, which are listed in the following table:
Maximum Cabling Distances
From To Maximum Distance
Switch Switch 100 meters (328 feet)
Switch Computer 100 meters (328 feet)
624-Port 10/100 Switch
Chapter 3: Connect the Switch
Connection Instructions
Make sure all of the devices you will connect to the Switch are
powered off.
ConnectaCategory5Ethernetnetworkcabletooneofthenumbered
ports on the Switch. Connect the other end to a computer or other
network device.
Connect the Ethernet Network Cable
Repeat step 2 to connect additional devices.
Connect the supplied power cord to the Switch’s power port. Plug
the other end of the adapter into an electrical outlet.
Power on the devices connected to the Switch. Each active port’s
corresponding LED will light up on the Switch.
Congratulations! The installation of the 10/100 Switch is complete.
1.
2.
3.
4.
5.
Other manuals for SR224R
1
Table of contents
Other Cisco Switch manuals
Cisco
Cisco Gigabit Switch Router Cisco 12012 Guide
Cisco
Cisco 4506 - Catalyst Switch Manual
Cisco
Cisco Nexus 7706 Manual
Cisco
Cisco Nexus 3000 series User manual
Cisco
Cisco Catalyst 2955 Series User manual
Cisco
Cisco 1548M How to use
Cisco
Cisco Nexus 5596 Manual
Cisco
Cisco Catalyst 1800 Guide User manual
Cisco
Cisco Nexus 9508 NX-OS Manual
Cisco
Cisco Nexus 7000 Series User manual
Cisco
Cisco SD2008 User manual
Cisco
Cisco Catalyst 2820 Instruction Manual
Cisco
Cisco Catalyst 2924M XL User manual
Cisco
Cisco AJ732A - MDS 9134 Fabric Switch User manual
Cisco
Cisco Catalyst 3850 Quick reference guide
Cisco
Cisco Nexus 9000 Series User manual
Cisco
Cisco 2975 - Catalyst LAN Base Switch User manual
Cisco
Cisco LightStream 1010 User manual
Cisco
Cisco Catalyst 3560-X Series Installation manual
Cisco
Cisco 4900M - Catalyst Switch User manual
