Cisco SR224G User manual

USER GUIDE

BUSINESS SERIES

24-Port 10/100 +

2-Port Gigabit Switch +

2 MiniGBIC

Model: SR224G

i24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Table of Contents

Chapter 1: Introduction 1

The 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 2: Product Overview 3

Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Placement Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 3: Installation 6

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Appendix A: Specifications 8

Appendix B: Warranty and Regulatory Information 9

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . 12

Règlement d’Industry Canada . . . . . . . . . . . . . . . . . . . . . . 12

EC Declaration of Conformity (Europe) . . . . . . . . . . . . . . . . . 12

User Information for Consumer Products Covered by EU Directive

2002/96/EC on Waste Electric and Electronic Equipment (WEEE) 13

Appendix C: Contact Information 21

ii 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

About This User Guide

Icon Descriptions

While reading through the User Guide, you may encounter various icons designed to call

attention to a specific item. Below are descriptions of these icons:

NOTE: This check mark indicates that there is a note of interest and is

something that you should pay special attention to while using the product.

WARNING: This exclamation point indicates that there is a caution or

warning and it is something that could damage your property or product.

WEB: This globe icon indicates a noteworthy website address or e-mail

address.

Online Resources

Most web browsers allow you to enter the web address without adding the http:// in front

of the address. This User Guide will refer to websites without including http:// in front of

the address. Some older web browsers may require you to add it.

Resource Website

Linksys www.linksys.com

Linksys International www.linksys.com/international

Glossary www.linksys.com/glossary

Network Security www.linksys.com/security

Specifications are subject to change without notice. Linksys is a registered trademark or

trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.

are trademarks or registered trademarks of their respective holders.

124-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Chapter 1: Introduction

Chapter 1:

Introduction

The 24-Port 10/100 + 2-Port Gigabit Switch + 2

MiniGBIC

This new Linksys rack-mount switch delivers non-blocking, wire speed

switching for your 10/100 Mbps network clients, plus multiple options

for connecting to your network backbone. Twenty-four 10/100 ports

wire-up your workstations, while the integrated 10/100/1000 ports or

miniGBIC ports connect to your servers or backbone at Gigabit speeds.

The SR224G incorporates non-blocking, wire-speed architecture that

forwards packets as fast as your network can deliver them. It features

broadcast storm suppression that maximizes the system availability.

Also included are Address Learning and Aging function to prevent data

transfer errors and Data Flow Control to help prevent packet loss.

All ports have automatic MDI/MDI-X crossover detection, so you don’t

have to worry about the cable type. Each port independently and

automatically negotiates for best speed and whether to run in half- or

full-duplex mode. Head-of-line blocking prevention keeps your high-

speed clients from bogging down in lower-speed traffic and fast store-

and-forward switching prevents damaged packets from being passed

on into the network.

No matter how intensive your network demands, the Linksys 24-Port

10/100 + 2-Port Gigabit Switch + 2 MiniGBIC has speed, flexibility, and

reliability that you can count on.

2 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Chapter 1: Introduction

Features

Ideal for integrating your 10 Mbps and 100 Mbps network

hardware

24 10/100 Ports provide dedicated bandwidth in Half or Full-Duplex

modes

2 Gigabit Ethernet ports and 2 shared miniGBIC slots for Gigabit

Fiber expansion

Each port supports Auto MDI/MDI-X cable detection

Compatible with all major network operating systems

Advanced store-and-forward packet switching optimizes data

transfers

Auto partitioning protects PCs from downed network lines

Signal regeneration ensures data transfer integrity

•

Chapter 2: Product Overview

24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Chapter 2:

Product Overview

Front Panel

The LEDs and network ports are located on the front panel of the

Switch.

Front Panel

LEDs

System (Green) This LED lights up and remains lit when the Switch is

powered on.

1-24 (Green) Each LED lights up when a connection is made through its

corresponding port. It flashes when the corresponding port is active.

Gigabit/miniGBIC 1-2 (Green) The Gigabit/miniGBIC LED lights up

when a connection is made through the corresponding Gigabit port. It

flashes when the corresponding port is active.

Ports

1-24 These ports connect the Switch to network devices,

such as computers.

Gigabit 1-2 The Gigabit RJ-45 ports support 10/100/1000

Mbps connections and are connection points for network

devices such as Gigabit servers. Each Gigabit RJ-45 port is

paired with a miniGBIC port. If a miniGBIC module is present,

the corresponding 10/100/1000 RJ-45 port will be disabled.

MiniGBIC 1-2 The two miniGBIC (Gigabit interface converter)

ports are connection points for miniGBIC modules, so the

Switch can uplink via fiber to another switch or two. The

miniGBIC ports are compatible with the MGBSX1, MGBLH1,

and MGBT1 only.

Chapter 2: Product Overview

4 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Back Panel

The power port is located on the back panel of the Switch.

Back Panel

Power The power port is where you will connect the included

power cord.

Side Panel

The security slot is located on the side panel of the Switch.

Side Panel with Security Slot

Security slot The security slot is where you can attach a lock

to protect the Switch from theft.

Placement Options

There are two ways to physically install the Switch:

Set the Switch on its four rubber feet.

Mount the Switch in a standard rack (1U high).

•

Chapter 2: Product Overview

24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Rack-Mount

To rack-mount the Switch, follow these instructions:

The Switch has four mounting holes on each side. Screw an included

mounting bracket into each side.

Attach the Brackets

Lift the Switch into the rack, and secure the brackets with additional

screws (not included).

Connect to Rack

6 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC

Chapter 3: Installation

Chapter 3:

Installation

Overview

This chapter will explain how to connect network devices to the Switch.

The application diagram shown here is an example of a typical network

configuration.

Internet

Cable/DSL

Modem Router

Wireless

Access Point

Desktop Notebook Server

Application Diagram

When you connect your network devices, make sure you don’t exceed

the maximum cabling distance of 100 meters (328 feet).

This manual suits for next models

Table of contents

Other Cisco Switch manuals

Cisco

Cisco SF220-24 User manual

Cisco

Cisco Catalyst 2960-L Manual

Cisco

Cisco OL-12518-01 Manual

Cisco

Cisco Catalyst 4500 Series Operating manual

Cisco

Cisco Catalyst 2960-S Series User manual

Cisco

Cisco Catalyst 2960-X Installation instructions

Cisco

Cisco Cisco mds 9124 - fabric switch User manual

Cisco

Cisco RSP7000 Operating and maintenance instructions

Cisco

Cisco Profile Series User manual

Cisco

Cisco Catalyst Express 500-24LC Instruction Manual

Cisco

Cisco Catalyst 3560-E Series User manual

Cisco

Cisco MGX 8950 Operating and safety instructions

Cisco

Cisco MGX 8850 PXM1E Installation manual

Cisco

Cisco Video Switch User manual

Cisco

Cisco Nexus 3000 series Manual

Cisco

Cisco Small Business 200 Series User manual

Cisco

Cisco SRW224G4P - Small Business Managed Switch Quick start guide

Cisco

Cisco NIM-ES2-8 Instruction Manual

Cisco

Cisco RJ-45-to-AUX User manual

Cisco

Cisco WS-C3750G-48PS-S Parts list manual

Cisco

Cisco Catalyst 4500 Series User manual

Cisco

Cisco Catalyst 2900 Series XL Manual

Cisco

Cisco Topspin 360 User manual

Cisco

Cisco Nexus 9236C User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual