Cisco ME 6500 Operating and safety instructions

CHAPTER

1-1

Cisco ME 6500 Series Ethernet Switch Installation Guide

OL-8900-01

Product Overview

This chapter describes the Cisco ME 6500 series Ethernet switches and contains these sections:

•Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S), page 1-1

•Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S), page 1-8

Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

The ME 6524 Ethernet switch (ME-C6524GS-8S) is a member of the Cisco ME 6500 series Ethernet

switches. The Cisco ME 6524 Ethernet switch (ME-C6524GS-8S) is a 1.5 RU horizontal chassis with

24 SFP downlink ports and 8 SFP uplink ports. Table 1-1 lists the features of the Cisco ME 6524

Ethernet switch (ME-C6524GS-8S) chassis. Table 1-2 lists the specifications of the Cisco ME 6524

Ethernet switch (ME-C6524GS-8S) chassis. Table 1-3 lists the front panel LEDs and their meanings.

Figure 1-1 shows the front view of the chassis with the major features identified; Figure 1-2 shows the

rear view of the chassis with the major features identified.

Table 1-1 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Features

Feature Description

Chassis 1.5 RU height, fixed configuration chassis

Modules Fixed configuration chassis; modules cannot be installed in the chassis.

Fan Tray •Supports one hot swappable fan tray (FAN-C6524). The fan tray

contains seven fans for chassis cooling. The individual fans are not

replaceable.

•Fan tray FAN LED

–

Green—Fan tray is operating normally.

–

Red—One or more individual fans have failed.

Power Supplies •Supports one or two power supplies. The following power supplies are

supported:

–

PWR-400W-DC (400 W DC-input power supply)

•Power supply LEDs—Refer to Table A-1 on page A-1 for LED colors

and their meanings.

1-2

Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-01

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

Pluggable transceivers supported •SFP transceivers. The 8 uplink ports support the following SFP

transceiver types:

–

GLC-T—1000BASE-T

–

GLC-SX-MM—1000BASE-SX

–

GLC-LH-SM—1000BASE-LX/LH

–

GLC-ZX-SM—1000BASE-ZX

–

GLC-BX-D—1000BASE-BX10-D

–

GLC-BX-U—1000BASE-BX10-U

–

GLC-FE-100BX-D—100BASE-BX10-D

–

GLC-FE-100BX-U—100BASE-BX10-U

–

CWDM-SFP-xxxx—CWDM SFP transceivers

The 24 downlink ports support the following SFP transceiver types:

–

GLC-T—1000BASE-T

–

GLC-SX-MM—1000BASE-SX

–

GLC-LH-SM—1000BASE-LX/LH

–

GLC-ZX-SM—1000BASE-ZX

–

GLC-BX-D—1000BASE-BX10-D

–

GLC-BX-U—1000BASE-BX10-U

–

GLC-FE-100BX-D—100BASE-BX10-D

–

GLC-FE-100BX-U—100BASE-BX10-U

Note Refer to Appendix B for SFP transceiver cabling distances and

additional information.

Front panel LEDs The chassis front panel has the following LEDs:

•PS1

•PS2

•FAN

•STATUS

•Downlink ports (24 LEDs)

•CompactFlash Activity

•Uplink ports (8 LEDs)

Note Refer to Table 1-3 for LED colors and their meanings.

Table 1-1 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Features (continued)

Feature Description

1-3

Cisco ME 6500 Series Ethernet Switch Installation Guide

OL-8900-01

Chapter 1 Product Overview Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

RESET switch A recessed switch allows the user to reset the system.

Console port A single console port allows the user access to the command-line interface.

The console port has an RJ-45 connector.

USB ports The switch has two USB ports:

•Port 1 is a device port with a Type B USB connector. A standard

USB 1.1 host, such as a PC, can plug into this port.

•Port 2 is a host port with a Type A USB connector. A standard USB 1.1

device, such as Flash memory, can plug into this port.

PCMCIA slot Type 2 CompactFlash devices can be installed in this slot.

Downlink ports The chassis front panel has 24 downlink ports. An SFP transceiver must be

installed for the port to operate. Cable type and recommended cabling

distance are determined by the type of SFP transceiver installed in the

downlink port.

Uplink ports The chassis front panel has 8 uplink ports. An SFP transceiver must be

installed for the port to operate. Cable type and recommended cabling

distance are determined by the type of SFP transceiver installed in the uplink

port.

Table 1-1 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Features (continued)

Feature Description

1-4

Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-01

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

Table 1-2 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Speciﬁcations

Item Specification

Environmental

Temperature, ambient

operating Certified for operation: 32˚ to 104˚F (0˚ to 40˚C)

Designed and tested for operation: 32˚ to 130˚F (0˚ to 55˚C)

Note The Cisco ME 6524 Ethernet switch is equipped with internal air

temperature sensors that generate a minor alarm at 104˚F (40˚C) and

a major alarm at 131˚F (55˚C).

Temperature, ambient

nonoperating and storage –4˚ to 149˚F (–20˚ to 65˚C)

Thermal transition 0.5˚C per minute (hot to cold)

0.33˚C per minute (cold to hot)

Humidity (RH), ambient

(noncondensing) operating 5% to 90%

Humidity (RH), ambient

(noncondensing)

nonoperating and storage

5% to 95%

Altitude, operating Certified for operation: 0 to 6500 feet (0 to 2000 m)

Designed and tested for operation: –200 to 10,000 feet (–60 to 3000 m)

Shock and vibration This switch complies with Network Equipment Building Systems (NEBS)

(Zone 4 per GR-63-Core) in the following areas:

•Earthquake environment and criteria

•Office vibration and criteria

•Transportation vibration and criteria

Shock

•Operational—5 G 30 ms, half-sine (IEC 68-2-27)

•Nonoperational—20 G, 7.5 ms, trapezoidal

Vibration

Operational—3 Hz to 500 Hz,

Power Spectral Density (PSD)-0.0005 G2/Hz at 10 Hz and 200 Hz.

5 dB/octave roll off at each end. 0.5 hours per axis (1.12 Grms).

Acoustic Noise 64 to 76 dB. International Organization for Standardization (ISO) 7779:

Bystander position operating to an ambient temperature of 86˚F (30˚C).

1-5

Cisco ME 6500 Series Ethernet Switch Installation Guide

OL-8900-01

Chapter 1 Product Overview Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

Physical Characteristics

Dimensions (H x W x D) •2.58 x 17.29 x 19.00 in. (6.54 x 43.92 x 48.26 cm).

•Chassis requires 1.5 RU1.

•Chassis can be mounted in 19-inch equipment racks that meet

ANSI/EIA 310-D and ETS 300-119 standards.

Weight 29.13 lb (13.21 kg).

Airflow •FAN-C6524—110 CFM

Note To maintain proper air circulation through the switch chassis, we

recommend that you maintain a minimum 6-inch (15 cm) separation

between a wall and the chassis air intake or a wall and the chassis air

exhaust. You should also allow a minimum separation of 12 inches

(30.5 cm) between the hot air exhaust on one chassis and the air

intake on another chassis. Failure to maintain adequate air space can

cause the chassis to overheat and the system to fail.

1. RU = rack units

Table 1-3 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Front Panel LEDs

LED Color/Meaning

PS1

(Power supply 1)

Green—Power supply is on and the input and output voltages are OK.

Red—The power supply has a fault.

Off—The power supply is off or is not installed.

PS2

(Power supply 2)

Green—Power supply is on and the input and output voltages are OK.

Red—The power supply has a fault.

Off—The power supply is off or is not installed.

FAN Green—Fan tray is operating normally.

Red—One or more individual fans in the fan tray have failed.

STATUS Green—The system is operating normally.

Red—A fault has been detected in the system.

Amber—System is booting up.

Off—The system is not powered up.

Table 1-2 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Speciﬁcations (continued)

Item Specification

1-6

Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-01

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

Figure 1-1 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)—Front View

Uplink port

(8 LEDs)

Green—The link is established and operational.

Amber—The port is disabled.

Blinking amber—The system has detected a fault with the link.

Off—No link is established or the SFP transceiver is not installed.

Downlink port

(24 LEDs)

Green—The link is established and operational.

Amber—The port is disabled.

Blinking amber—The system has detected a fault with the link.

Off—No link is established or the SFP transceiver is not installed.

Table 1-3 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Front Panel LEDs (continued)

LED Color/Meaning

1STATUS LEDs 2Console port (RJ-45 connector)

3Downlink ports LEDs 4USB ports

5PCMCIA slot 6Uplink ports LEDs

7ESD ground connector 8Uplink ports (SFP transceivers required)

9Downlink ports (SFP transceivers required)

147977

Catalyst 6524GS

PS1

USB FLASH

PS2

FAN

STATUS

CONSOLE

10 11

12 13

14 15

15 17

18 19

20 21

22 23

26 27

28 29

30 31

910

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

29 30

31 32

987

1-7

Cisco ME 6500 Series Ethernet Switch Installation Guide

OL-8900-01

Chapter 1 Product Overview Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)

Figure 1-2 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)—Rear View

1System ground pad/NEBS ground location 2Power supplies

3Fan tray 4Power supply status LEDs

5Power supply terminal block 6Power on/off switch

147978

INPUT

OUTPUT

OK FAN

INPUT

OUTPUT

OK FAN

456

1-8

Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-01

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S)

The Cisco ME 6524 Ethernet switch (ME-C6524GT-8S) is a member of the Cisco ME 6500 series

Ethernet switches. The Cisco ME 6524 Ethernet switch (ME-C6524GT-8S) is a 1.5 RU horizontal

chassis with 24 10/100/1000 downlink ports and 8 1000BASE SFP uplink ports. Table 1-4 lists the

features of the Cisco ME 6524 Ethernet switch (ME-C6524GT-8S) chassis. Table 1-5 lists the

specifications of the Cisco ME 6524 Ethernet switch (ME-C6524GT-8S) chassis. Table 1-6 lists the

front panel LEDs and their meanings. Figure 1-3 shows the front view of the chassis with the major

features identified; Figure 1-4 shows the rear view of the chassis with the major features identified.

Table 1-4 Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Features

Feature Description

Chassis 1.5 RU height, fixed configuration chassis

Modules Fixed configuration chassis; modules cannot be installed in the chassis.

Fan Tray •Supports one hot swappable fan tray (FAN-C6524). The fan tray

contains seven fans for chassis cooling. The individual fans are not

replaceable.

•Fan tray FAN LED

–

Green—Fan tray is operating normally.

–

Red—One or more individual fans have failed.

Power Supplies •Supports one or two power supplies. The following power supplies are

supported:

–

PWR-400W-DC (400 W DC-input power supply)

•Power supply LEDs—Refer to Table A-1 on page A-1 for LED colors

and their meanings.

Pluggable transceivers supported •SFP transceivers. The 8 uplink ports support the following SFP

transceivers:

–

GLC-T—1000BASE-T

–

GLC-SX-MM—1000BASE-SX

–

GLC-LH-SM—1000BASE-LX/LH

–

GLC-ZX-SM—1000BASE-ZX

–

GLC-BX-D—1000BASE-BX10-D

–

GLC-BX-U—1000BASE-BX10-U

–

GLC-FE-100BX-D—100BASE-BX10-D

–

GLC-FE-100BX-U—100BASE-BX10-U

–

CWDM-SFP-xxxx—CWDM SFP transceivers

Note Refer to Appendix B for SFP transceiver cabling distances and

additional information.

1-9

Cisco ME 6500 Series Ethernet Switch Installation Guide

OL-8900-01

Chapter 1 Product Overview Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S)

Front panel LEDs The chassis front panel has the following LEDs:

•PS1

•PS2

•FAN

•STATUS

•Downlink ports (24 LEDs)

•CompactFlash Activity

•Uplink ports (8 LEDs)

Note Refer to Table 1-3 for LED colors and their meanings.

RESET switch A recessed switch allows the user to reset the system.

Console port A single console port allows the user access to the command-line interface.

The console port has an RJ-45 connector.

USB ports The switch has two USB ports:

•Port 1 is a device port with a Type B USB connector. A standard

USB 1.1 host, such as a PC, can plug into this port.

•Port 2 is a host port with a Type A USB connector. A standard USB 1.1

device, such as Flash memory, can plug into this port.

PCMCIA slot Type 2 CompactFlash devices can be installed in this slot.

Downlink ports The chassis front panel has 24 downlink ports. These are 10/100/1000 ports

using RJ-45 female connectors.

Uplink ports The chassis front panel has 8 uplink ports. An SFP transceiver must be

installed for the port to operate. Cable type and recommended cabling

distance are determined by the type of SFP transceiver installed in the uplink

port.

Table 1-4 Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Features (continued)

Feature Description

1-10

Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-01

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S)

Table 1-5 Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Speciﬁcations

Item Specification

Environmental

Temperature, ambient

operating Certified for operation: 32˚ to 104˚F (0˚ to 40˚C)

Designed and tested for operation: 32˚ to 130˚F (0˚ to 55˚C)

Note The Cisco ME 6524 Ethernet switch is equipped with internal air

temperature sensors that generate a minor alarm at 104˚F (40˚C) and

a major alarm at 131˚F (55˚C).

Temperature, ambient

nonoperating and storage –4˚ to 149˚F (–20˚ to 65˚C)

Thermal transition 0.5˚C per minute (hot to cold)

0.33˚C per minute (cold to hot)

Humidity (RH), ambient

(noncondensing) operating 5% to 90%

Humidity (RH), ambient

(noncondensing)

nonoperating and storage

5% to 95%

Altitude, operating Certified for operation: 0 to 6500 feet (0 to 2000 m)

Designed and tested for operation: –200 to 10,000 feet (–60 to 3000 m)

Shock and vibration This switch complies with Network Equipment Building Systems (NEBS)

(Zone 4 per GR-63-Core) in the following areas:

•Earthquake environment and criteria

•Office vibration and criteria

•Transportation vibration and criteria

Shock

•Operational—5 G 30 ms, half-sine (IEC 68-2-27)

•Nonoperational—20 G, 7.5 ms, trapezoidal

Vibration

Operational—3 Hz to 500 Hz,

Power Spectral Density (PSD)-0.0005 G2/Hz at 10 Hz and 200 Hz.

5 dB/octave roll off at each end. 0.5 hours per axis (1.12 Grms).

Acoustic Noise 64 to 76 dB. International Organization for Standardization (ISO) 7779:

Bystander position operating to an ambient temperature of 86˚F (30˚C).

Other manuals for ME 6500

Table of contents

Other Cisco Switch manuals

Cisco

Cisco MGX 8950 User manual

Cisco

Cisco Small Business 200 Series Instruction Manual

Cisco

Cisco NM-16ESW - EtherSwitch Switch User manual

Cisco

Cisco Nexus 7000 Series User manual

Cisco

Cisco 6503 - Catalyst Firewall Security Sys Manual

Cisco

Cisco Catalyst 4500 E Supervisor Engine 6-E Series Quick guide

Cisco

Cisco Nexus 9808 NX-OS Manual

Cisco

Cisco SLM2024PT-NA User manual

Cisco

Cisco C-series Nexus 5010 User manual

Cisco

Cisco Catalyst 2900 Series XL Installation guide

Cisco

Cisco SG300 series User manual

Cisco

Cisco WS-C2950SX-48-SI User manual

Cisco

Cisco MGX 8850 PXM1E Installation manual

Cisco

Cisco MEM-S2-512MB= notes Quick start guide

Cisco

Cisco Catalyst 2960-24TC User manual

Cisco

Cisco Catalyst 1900 Series User manual

Cisco

Cisco Nexus 93108TC-FX3 Manual

Cisco

Cisco Catalyst 2900 Series User manual

Cisco

Cisco 9134 - MDS Multilayer Fabric Switch How to use

Cisco

Cisco Sx350 Instruction Manual

Cisco

Cisco Nexus 9336C-FX2-E Manual

Cisco

Cisco Ethernet Connectors Jackscrew User manual

Cisco

Cisco Catalyst 3850 Manual

Cisco

Cisco 4006 - Catalyst Switch Instruction Manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual