Cisco IE3400H Guide

Switch Mounting

•Switch Mounting, on page 1

Switch Mounting

This chapter describes how to mount the switch.

Mounting the Switch

To prevent the switch from overheating, ensure these minimum clearances:– Top and bottom: 2.0 in. (50.8

mm)– Exposed side (not connected to the module): 2.0 in. (50.8 mm) – Front: 2.0 in. (50.8 mm)

Caution

Installing the Switch on the Wall

To attach the switch to a wall or a panel, follow these steps.

Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware

or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

Statement 378

Warning

Procedure

Step 1 Position the switch mounting bracket against the wall or a panel in the desired location, with the arrow pointing

up. See the following figure. Attach the bracket to the wall with the 4 enclosed Philips screws.

Switch Mounting

Figure 1: Mounting Wall Bracket to Wall

When attaching the bracket to the wall or pannel, ensure that the screws engage a stud or support

structure capable of supporting the weight of the bracket and the switch.

Note

Step 2 Loosly attach the 4 mounting screws to the switch and slide it into the bracket and down. See the following

figure.

Switch Mounting

Installing the Switch on the Wall

Figure 2: Attaching the Switch to the Mounting Bracket

Step 3 To remove the switch, loosen the 4 mounting screws and slide the switch up and forward, out of the mounting

bracket. Then the bracket itself can be unscrewed from the wall, if necessary.

What to do next

After the switch is mounted on the wall or panel, connect the power and alarm wires, as described in the

“Connecting Alarm Circuits” section on page -12 .

Switch Mounting

Installing the Switch on the Wall

Switch Mounting

Installing the Switch on the Wall

Table of contents

Other Cisco Switch manuals

Cisco

Cisco SRW224 User manual

Cisco

Cisco LightStream 1010 Quick start guide

Cisco

Cisco Catalyst 4500 Series User manual

Cisco

Cisco MGC Node Manager User manual

Cisco

Cisco 2950 - Catalyst Switch Installation manual

Cisco

Cisco Catalyst X6748 User manual

Cisco

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... User manual

Cisco

Cisco 1548M How to use

Cisco

Cisco Cisco mds 9216 - fabric switch Instruction Manual

Cisco

Cisco BPX 8600 Series User manual

Cisco

Cisco ENCS 5406-W User manual

Cisco

Cisco 3020 - Cisco Catalyst Blade Switch Instruction Manual

Cisco

Cisco Linksys EZXS88W User manual

Cisco

Cisco Catalyst 3040 User manual

Cisco

Cisco Nexus 9000 Series User manual

Cisco

Cisco Catalyst 9300 Series Manual

Cisco

Cisco Catalyst 2360 User manual

Cisco

Cisco Aironet 350 Series User manual

Cisco

Cisco 3750 - Catalyst EMI Switch User manual

Cisco

Cisco SRW2016 - Small Business Managed Switch User manual

Cisco

Cisco Linksys SGE2000P User manual

Cisco

Cisco MDS 9120 - Fabric Switch User manual

Cisco

Cisco SLM224G4S Instruction Manual

Cisco

Cisco Nexus 9396PX Manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual