Cisco Catalyst 9200CX Compact Series Manual
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation
Guide
First Published: 2022-08-11
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
CONTENTS
Preface v
PREFACE
Document Conventions v
Related Documentation vii
Obtaining Documentation and Submitting a Service Request vii
Product Overview 1
CHAPTER 1
Switch Models 1
Front Panel Components 1
10/100/1000 Ports 3
PoE and PoE+ Ports 3
C9200CX-12T only PD Port 4
USB Type A Port 4
USB Micro-B Port 4
SD Card Slot 4
Uplink Ports 5
Rear Panel 6
RFID Tag 6
Auxiliary Power Adapter 6
Internal Power Supply 7
Network Configurations 7
Preparing for Installation 9
CHAPTER 2
Safety Warnings 9
Installation Guidelines 11
Site Requirements 12
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
ii
Contents
Temperature 12
Humidity 13
Altitude 13
Dust and Particles 13
Air Quality 13
Corrosion 14
EMI and Radio Frequency Interference 15
Power Source Interruptions 16
System Grounding 17
Maintaining Safety with Electricity 18
Verifying Switch Operation 19
Installing a Compact Switch 21
CHAPTER 3
Shipping Box Contents 21
Mounting the Switch 23
Mounting on a Desk or Shelf Without Mounting Screws 23
Mounting using the Mounting Tray and Screws 24
Mounting using the Mounting Tray and Magnet 27
Mounting Under a Desk or a Shelf 30
Mounting the Switch Using Rack Mount Brackets 34
Mounting the Switch on a DIN Rail 35
Connecting the System Ground 37
Attaching the Adapter Bracket to the Switch (Optional) 38
Installing the Power Cord Retainer (Optional) 41
Installing the Cable Guard (Optional) 43
Installing an SFP or SFP+ Module 45
10/100/1000 PoE and PoE+Port Connections 46
10/100/1000 Ethernet Port Connections 47
Auto-MDIX Connections 48
Configuring the Switch 49
CHAPTER 4
Configuring the Switch Using the Web User Interface 49
Configuring the Switch Using the CLI 49
Accessing the CLI Through the Console Port 49
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
iii
Contents
Connecting the RJ45 Console Port 49
Connecting the USB Console Port 50
Installing the Microsoft Windows USB Device Driver 50
Installing the Cisco Microsoft Windows USB Driver 51
Uninstalling the Cisco Microsoft Windows USB Driver 51
Uninstalling the Cisco Microsoft Windows USB Driver 51
Technical Specifications 53
APPENDIX A
Environmental and Physical Specifications 53
Switch LEDs 55
APPENDIX B
LEDs 55
System LED 56
Status (STAT) LED 57
Speed LED 57
PoE LED 57
Port LEDs and Modes 57
PD Power LED 59
Beacon LED 59
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
iv
Contents
Preface
This preface describes the conventions of this document and information on how to obtain other documentation.
It also provides information on what's new in Cisco product documentation.
•Document Conventions , on page v
•Related Documentation, on page vii
•Obtaining Documentation and Submitting a Service Request, on page vii
Document Conventions
This document uses the following conventions:
DescriptionConvention
Both the ^symbol and Ctrl represent the Control (Ctrl) key on a keyboard. For
example, the key combination ^D or Ctrl-Dmeans that you hold down the Control
key while you press the D key. (Keys are indicated in capital letters but are not
case sensitive.)
^ or Ctrl
Commands and keywords and user-entered text appear in bold font.bold font
Document titles, new or emphasized terms, and arguments for which you supply
values are in italic font.
Italic font
Terminal sessions and information the system displays appear in courier font.Courier font
Bold Courier font indicates text that the user must enter.Bold Courier font
Elements in square brackets are optional.[x]
An ellipsis (three consecutive nonbolded periods without spaces) after a syntax
element indicates that the element can be repeated.
...
A vertical line, called a pipe, indicates a choice within a set of keywords or
arguments.
|
Optional alternative keywords are grouped in brackets and separated by vertical
bars.
[x | y]
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
v
DescriptionConvention
Required alternative keywords are grouped in braces and separated by vertical
bars.
{x | y}
Nested set of square brackets or braces indicate optional or required choices within
optional or required elements. Braces and a vertical bar within square brackets
indicate a required choice within an optional element.
[x {y | z}]
A nonquoted set of characters. Do not use quotation marks around the string or
the string will include the quotation marks.
string
Nonprinting characters such as passwords are in angle brackets.< >
Default responses to system prompts are in square brackets.[ ]
An exclamation point (!) or a pound sign (#) at the beginning of a line of code
indicates a comment line.
!, #
Reader Alert Conventions
This document may use the following conventions for reader alerts:
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
manual.
Note
Means the following information will help you solve a problem.
Tip
Means reader be careful. In this situation, you might do something that could result in equipment damage
or loss of data.
Caution
Means the described action saves time. You can save time by performing the action described in the
paragraph.
Timesaver
IMPORTANT SAFETY INSTRUCTIONS
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. Read the installation instructions before using,
installing, or connecting the system to the power source. Use the statement number provided at the end
of each warning statement to locate its translation in the translated safety warnings for this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
vi
Preface
Preface
Related Documentation
Before installing or upgrading the switch, refer to the switch Release Notes.
Note
•Cisco Catalyst 9200 Series Switches documentation, located at: https://www.cisco.com/c/en/us/products/
switches/catalyst-9200-series-switches/index.html
• Cisco Transceiver Modules documentation, including compatibility matrixes, located at:
http://www.cisco.com/en/US/products/hw/modules/ps5455/tsd_products_support_series_home.html
• Cisco Validated Designs documents, located at:
http://www.cisco.com/go/designzone
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information,
see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco
technical documentation, at:
http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
vii
Preface
Related Documentation
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
viii
Preface
Obtaining Documentation and Submitting a Service Request
CHAPTER 1
Product Overview
•Switch Models, on page 1
•Front Panel Components, on page 1
•Rear Panel, on page 6
•Network Configurations, on page 7
Switch Models
The Cisco Catalyst 9200CX Series switches have three compact (C9200CX) switch models. The following
tables describe all the available Cisco Catalyst 9200CX Series switches and the features supported.
Table 1: C9200CX Compact Switch Models and Descriptions
DescriptionSwitch Model
8x1G PoE+ ports; 2x1G and 2x10G SFP+ fixed uplink ports; powered
using 315W internal power supply unit; fanless.
C9200CX-8P-2X2G
12x1G PoE+ ports; 2x1G and 2x10G SFP+ fixed uplink ports;
powered using 315W internal power supply unit; fanless.
C9200CX-12P-2X2G
12x1G Ethernet ports; 3x1G Copper and 2x10G SFP+ uplink ports;
provides power either from one of the 3 copper uplink ports as Class
6 PD port or using an external auxiliary power adapter; fanless.
C9200CX-12T-2X2G
Front Panel Components
This section describes the front panel components of Cisco Catalyst 9200CX Series switches :
• 8 or 12 downlink ports of one of the following types:
• 10/100/1000
• 10/100/1000 PoE+
• 1G/10G Uplink ports
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
1
• USB Type A storage port
• USB micro-Type B console port
• LEDs
• Blue Beacon
• SD card slot
• Internal power supply connector for compact switches
Front Panel of a C9200CX-12P-2X2G Switch
2x10G SFP+ uplink ports7SD Card slot1
Internal power supply connector8SD Card security lock2
USB Type A connector9Blue Beacon3
Mode button10Status LEDs4
USB micro-Type B (console) port1110/100/1000 PoE+ ports5
--2x1G copper uplink ports6
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
2
Product Overview
Front Panel Components
This manual suits for next models
5
Table of contents
Other Cisco Switch manuals
Cisco
Cisco AJ732A - MDS 9134 Fabric Switch User manual
Cisco
Cisco IE-5000-16S12P User manual
Cisco
Cisco Nexus 9332D-H2R NX-OS Manual
Cisco
Cisco ONS 15600 User manual
Cisco
Cisco MDS 9216 Manual
Cisco
Cisco SCE8000 GBE Operator's manual
Cisco
Cisco Nexus 93180YC-FX3 User manual
Cisco
Cisco Catalyst 9500 Series Manual
Cisco
Cisco 7008P - SFS InfiniBand Server Switch Original instructions
Cisco
Cisco Nexus 9364C Manual
Cisco
Cisco SG300 series User manual
Cisco
Cisco Nexus 9516 Manual
Cisco
Cisco 3750 - Catalyst EMI Switch Manual
Cisco
Cisco Nexus 2000 Series Quick reference guide
Cisco
Cisco AJ732A - MDS 9134 Fabric Switch User manual
Cisco
Cisco 2950SX 48 SI - Catalyst Switch User manual
Cisco
Cisco Nexus 9348GC-FX3PH Manual
Cisco
Cisco IE 3010 Manual
Cisco
Cisco LRE CPE Manual
Cisco
Cisco 300 Series Instruction Manual
