Cisco RV Series User manual

Table of contents

Other Cisco Network Router manuals

Cisco

Cisco UC 320W Instruction Manual

Cisco

Cisco ASR1006-10G-SEC/K9 - ASR 1006 VPN+FW Bundle... User manual

Cisco

Cisco WTR54GS User manual

Cisco

Cisco WS-C2960G-8TC-L Quick guide

Cisco

Cisco 7206 - VXR Router User manual

Cisco

Cisco 2621 User manual

Cisco

Cisco LINKSYS E2500V3 User manual

Cisco

Cisco ASR 1002-F Installation guide

Cisco

Cisco 860 Series Instruction Manual

Cisco

Cisco ACE-4710-K9 Instruction Manual

Cisco

Cisco 7000 and 7507 LED Board MAS-7KLED Guide

Cisco

Cisco 809 Manual

Cisco

Cisco Catalyst IR1800 Rugged Series User manual

Cisco

Cisco CPA2501 User manual

Cisco

Cisco ASR 1002-HX User manual

Cisco

Cisco ASR 14000 Series Manual

Cisco

Cisco RV260 series Instruction Manual

Cisco

Cisco 12000 - Series Chassis Modular Expansion... User manual

Cisco

Cisco Catalyst Express 520 Manual

Cisco

Cisco SOHO 77 Manual

Cisco

Cisco ASR 900 Series User manual

Cisco

Cisco CRS User manual

Cisco

Cisco ASR 900 Series User manual

Cisco

Cisco Router Cisco 7206 VXR User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

EnGenius

EnGenius ESR-9710 quick start guide

LevelOne

LevelOne FBR-1416 user manual

Dynacord

Dynacord Promatrix 6000 Operation manual

Lorex

Lorex F5D8230-4 Guide

●

●

●

●

Configure Internet Protocol (IP) Mode on an

RV Series Router

Objective

The Internet Protocol (IP) Mode tells your router what IP version your local network is using

in comparison to what version the Wide Area Network (WAN) uses. It is important to

configure this option correctly as certain features may or may not be available on your router

depending on what the state of your network is.

This article aims to show you how to configure the IP Mode on an RV Series Router.

Applicable Devices

RV Series

Software Version

1.0.3.16 — RV130, RV130W

1.0.0.17 — RV132W

1.0.0.21 — RV134W

Configure IP Mode

Step 1. Log in to the web-based utility and choose Networking > IP Mode.

Note: The images on this article are taken from the RV130W router. Menu options may vary

per model.

Step 2. In the IP Mode field, choose an option from the drop-down list.

●

●

●

●

●

●

●

●

If you are using RV130 or RV130W, the options are:

LAN:IPv4, WAN:IPv4 — Both the LAN and the WAN use IPv4.

LAN:IPv6, WAN:IPv4 — Use this if the LAN only uses IPv6 but the WAN uses IPv4. If you

choose this option, you may proceed to the Static 6to4 DNS section.

LAN:IPv6, WAN:IPv6 — Both the LAN and the WAN use only IPv6.

LAN:IPv4+IPv6, WAN:IPv4 — The LAN uses both IPv4 and IPv6, but the WAN only uses

IPv4. If you choose this option, you may proceed to the Static 6to4 DNS section.

LAN:IPv4+IPv6, WAN:IPv4+IPv6 — Both the LAN and the WAN use IPv4 and IPv6.

LAN:IPv4, WAN:IPv6 — The LAN uses IPv4, but the WAN uses IPv6.

If you are using the RV132W or RV134W router, the options are:

LAN:IPv4, WAN:IPv4 — Both the LAN and the WAN use IPv4.

LAN:IPv4+IPv6, WAN:IPv4+IPv6 — Both the LAN and the WAN use IPv4 and IPv6.

Step 3. Click Save.

Step 4. Click OK on the notification telling you that you will now be redirected to the new

default IP address of the router. If the page is not redirected automatically in 2-3 minutes,

enter the new IPv4 or IPv6 address to log in to the router.

Static 6to4 DNS (RV130 and RV130W only)

If you chose LAN:IPv6, WAN:IPv4 or LAN:IPv4+IPv6, WAN:IPv4 from the IP Mode drop-

down list, the Show Static 6to4 DNS Entry will become enabled. It allows IPv6 packets to be

transmitted over an IPv4 network. The 6to4 tunneling is typically used when a site or end

user wants to connect to the IPv6 Internet using the existing IPv4 network. Configuring this

feature is optional and available only on RV130 and RV130W.

Step 1. Click the Show Static 6to4 DNS Entry button to display the Domain to IP address

table. This table is used to map domais to IP addresses, so that a user is redirected to a

corresponding IP address when using the domain.

Step 2. In the Domain 01 field, enter a domain that you want to redirect to an IP address.

You can use up to five domains.

Note: In this example, the domain used is cisco.com.

Step 3. For each domain, enter the IP address on the corresponding IP field.

Note: In this example, the IP address is 10.10.242.242.

Step 4. Click Save.

Step 5. Click OK on the notification telling you that you will now be redirected to the new

default IP address of the router. If the page is not redirected automatically in 2-3 minutes,

please enter the new IPv4 or IPv6 address to log in to the router.

You should now have successfully configured the IP mode on your RV Series Router.