Cisco MERAKI CW9166D1 User manual
CW9166D1 Installation Guide
CW9166D1 Installation Guide
The Cisco Catalyst Wireless 9166D1 is a tri-band enterprise-class WiFi 6E cloud-managed access point supporting the 2.4 G z, 5 G z, and the newly opened
unlicensed 6 G z frequency bands. Designed for the ultra-high capacity and highest density, these APs meet the needs of the most demanding and mission-
critical environments. The Catalyst Wireless 9166D1 is designed with an integrated directional antenna allowing the coverage pattern to favor the area the AP is
facing - ideal for warehouse, auditoriums, etc. The access point includes a fourth radio dedicated to optimizing the RF environment and securing the airwaves.
The AP also has an additional Bluetooth Low Energy (BLE) capable radio used for location and other IoT applications. In addition, the CW9166D1 has a USB
port.
About this Guide
This guide provides instructions on how to install and configure your CW9166D1 access points. This guide also provides mounting instructions and limited
troubleshooting procedures. For more wireless installation guides, refer to the wireless installation guides section on our documentation website.
Product Overview
Physical Specifications
CW9166D1
Interfaces
• 1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)
• 1x DC power connector (8 mm, center positive)
Power
• Power over Ethernet: 42.5 - 57 V (802.3at and 802.3bt compliant)
• Power consumption: 30W to 40W (802.3at required)
• Power over Ethernet injector (MA-INJ-6) and DC adapter (MA-PWR-50WAC)
Power over Ethernet injector and DC adapter sold separately
Actual power consumption may vary depending on the AP usage
1
USB will be disabled when powered by 802.3 at/PoE+
It is recommended that you ensure that LLDP is enabled to allow proper power negotiation
Environment
• Operating temperature: -4 °F to 122 °F (-20°C to 50 °C)
• Storage and Transportation Temperature: -4 °F to 122°F (-20 °C to 50 °C)
• umidity: 0 to 90% non-condensing
Physical Security
• Kensington lock hardpoint
* Screws that can be attached to the security hasp of the universal mounting bracket
• Concealed mount plate with anti-tamper cable bay
Product View and Physical Features
Your CW9166D1 has the following features:
2
A - Cable access bay
B - LED indicator
C - USB Slot - with protective cover
3
D - USB Slot - with protective cover
E - Rubber stands
F - Ports location
G - Kensington lock slot
4
H - USB Slot - with protective cover
I - 5Gb ethernet port
J - RJ45 console port (Not Available in Meraki Mode)
K - Reset button
L - Kensington lock slot
M - DC 54V power input port
N - Security hasp for padlocking AP to mounting bracket
The Meraki AP comes with the default Cisco universal mounting bracket (AIR-AP-BRACKET-2) that has the following features:
5
O - Security Hasp
P - Access Point Mounting Keyholes
Q- T-rail attachment points
R - Cable access slot
The Meraki AP comes with an articulating arm (CW-MNT-ART2-00) that has the following features:
6
1 - M4 X 10mm screw with washer
2 - AIR-AP-BRACKET-2 (Not included in this kit.)
3 - Access point bracket plate
4 - M8 x40 Hex bolts
5 - Mounting arm
6 - M8 washer (external-tooth)
7 - M8 flanged lock nut
7
8 - Pole or wall mounting flange
Security Features
These AP feature multiple options for physically securing the access point after installation:
1. Security hasp – The universal mounting bracket has a security hasp and can be used to secure the access point to the universal mounting bracket. Engaging
the security screw prevents accidental dislodging and theft.
2. Kensington lock – The access point contains a hard point that allows it to be secured to any nearby permanent structure using a standard Kensington lock.
Ethernet Ports
The CW9166D1 features one RJ45 port capable of operating at 100/1000/2.5G/5G BASE-T Ethernet (RJ45).
5G, ?
The labeled “5G, ?” accepts 802.3at and 802.3bt power. This port is typically used as the primary uplink to your LAN/WAN.
Warning: AP does not support 802.3af as a power source
Power Source Options
These AP can be powered by a single M-Gig 802.3bt capable UPoE port, allowing for full operation including providing up to 4.5W of power to the USB port. The
AP is capable of operating at its full capacity when powered by a single 802.3at power source, however, the USB port will be disabled.
The table below indicates the different modes of PoE power input and the expected operation of the AP
Port0 2.4GHz 5GHz 6GHz Scan IoT USB
AT 4x4 4x4 4x4 ON ON OFF
BT 4x4 4x4 4x4 ON ON ON
CW9166D1 AP can be powered by PoE power in different modes as mentioned above when using a PoE capable switch. They can also be powered by a single
802.3bt capable PoE injector MA-INJ-6 Meraki multiGigabit 802.3bt Power over Ethernet Injector. It can also be powered by an AC power adaptor MA-
PWR-50WAC - Meraki AC Adapter for MR Series.
Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the AP will reboot and be restored to its original factory settings by deleting all
configuration information stored on the unit.
Package Contents
The access point packages contain the following:
8
CW9166D1 Cloud-Managed Access Point
Cisco Universal Mount Bracket - AIR-AP-BRACKET-2
9
Cisco Articulating Arm - CW-MNT-ART2-00 (Optional)
10
Table of contents
Other Cisco Network Hardware manuals
Cisco
Cisco 8540 - Catalyst Campus Switch Router Modular Expansion... User manual
Cisco
Cisco OL-6109-01 User manual
Cisco
Cisco OSM-12CT3/T1 - Optical Services Module... Quick guide
Cisco
Cisco CWDM-OADM 1 Series Quick start guide
Cisco
Cisco Firepower 4100 Series User manual
Cisco
Cisco GRP= Quick guide
Cisco
Cisco ONS 15327 Manual
Cisco
Cisco VIP-4R/4T Operating and maintenance instructions
Cisco
Cisco Nexus 93600CD-GX Manual
Cisco
Cisco ASA 5506-X Manual
Cisco
Cisco MGX 8260 Quick start guide
Cisco
Cisco ASA Quick start guide
Cisco
Cisco N540X-6Z18G-SYS-A User manual
Cisco
Cisco AGS+ Instruction Manual
Cisco
Cisco Linksys Business Series Network Storage System... User manual
Cisco
Cisco Firepower 1010 Series Manual
Cisco
Cisco AIR-BR1410A-A-K9 - Aironet 1410 Wireless... Quick reference guide
Cisco
Cisco Performance Routing Engine 5 Manual
Cisco
Cisco PC4000 User manual
Cisco
Cisco ISE - Line Card ISE User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
