Chroma Inspire User manual

Inspire Terminal Strip Quick Start Guide V1.01 Inspire Terminal Strip Quick Start Guide V1.01 PN: 632-0 0

Approvals & Disclaimer

The information contained herein is offered in good faith and is believed to be accurate. However,

because conditions and methods of use of our products are beyond our control, this information should

not be used in substitution for customer's tests to ensure that Chroma-Q products are safe, effective,

and fully satisfactory for the intended end use. Suggestions of use shall not be ta en as inducements to

infringe any patent. Chroma-Q sole warranty is that the product will meet the Chroma-Q sales

specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is

limited to refund of purchase price or replacement of any product shown to be other than as warranted.

Chroma-Q reserves the right to change or ma e alteration to devices and their functionality without notice

due to on-going research and development.

The Chroma-Q Inspire range has been designed specifically for the lighting industry. Regular

maintenance should be performed to ensure that the products perform well in the entertainment

environment.

If you experience any difficulties with any Chroma-Q products please contact your selling dealer. If your

selling dealer is unable to help please contact [email protected]. If the selling dealer is unable to

satisfy your servicing needs, please contact the following for full factory service:

Outside North America: North America:

Tel: +44 (0)1494 446000 Tel: +1 416-255-9494

Fax: +44 (0)1494 461024 Fax: +1 416-255-3514

[email protected] [email protected]

For further information please visit the Chroma-Q website at www.chroma-q.com.

Chroma-Q and Inspire Terminal Strip are trademar s, for more information on this visit www.chroma-

q.com/trademar s.

The rights and ownership of all trademar s are recognised.

Quick Start Guide

Chroma-Q

Inspire™ Terminal Strip

For a full product manual please visit www.chroma-q.com

Software Version 1.01

Inspire Terminal Strip Quick Start Guide V1.01 Inspire Terminal Strip Quick Start Guide V1.01

1. Overview

The new Chroma-Q

Inspire™ Terminal Strip LED house light features a single light engine with 36 high powered LEDs

(RGBW), a fully homogenized optic and controlled via the Inspire™ External Control Box. Through the Inspire External

Control Box, the fixture can be controlled remotely through the ANSI E1.11 USITT DMX 512-A protocol.

2. Safety

Caution

CautionCaution

Caution

1. This product is for professional use only. It is NOT intended for domestic or outdoor use.

2. The bright flash of light during power-up & continuous strobe may cause epileptic seizure.

3. This product must be used with a safety cable.

3. Cabling

System Diagram: (Figure 1)

Power & Data Connections: (Figure 2)

Power Input: (Figure

)

Control Data: (Figure

)

To connect the wiring for power and control data:

•Remove the cover plate for power input.

•Insert the AC power cable with strain relief through the cover plate and connect to the Terminal Block Plug and

into the Terminal Block header in the fixture. (Figure 2 & 3)

•Put back and fasten the cover plate

•Connect the DMX control data cables from the Inspire External Control Box to the Terminal Block Plug and plug

into the Terminal Block headers at the rear of the fixture (Figure 2 & 4)

4. Mounting

A mounting bracket is built into the enclosure for overhead applications. Secure the fixture with a safety bond. A fixing

hold is built into the enclosure.

5. Optics

The Inspire can be built with either Narrow, Medium or Wide lens. The beam angles are:

Narrow: ~32°; Medium: ~42°; Wide: ~65°

6. Control

The control functions are accessed through the Touch Screen display at the front panel of the Inspire External Control

Box. The features of the Touch Screen Display are:

Control Menu

Main Menu

Displays the model name, DMX information, AC and Emergency

power input and Command buttons

Address Sets the DMX start address for each output: Output 1, Output 2, Output 3

Maximum DMX cable

length from Data Out

1/2/3 to the 1st fixture

must not exceed

500’/152m.

Note: The DMX cable

connected to the first Terminal

Strip fixture from each Data

Output of the External Control

Box must be terminated with a

120 ohm resistor. See Inspire

Terminal Strip User Manual

for details.

Inspire Terminal Strip Quick Start Guide V1.01 Inspire Terminal Strip Quick Start Guide V1.01

Mode

Select from the control mode options:

RGBW single 4 channels x RGBW for each fixture in each output

(up to 512 channels per output)

RGBW output

4 channels x RGBW for all fixtures in each

output

Tungsten

1 channel

for all fixtures in each

output

Loo Store Save and Load a Loo

Setup Menu

Set the internal settings of the Inspire External Control:

DMX Data Displays DMX values

RotateDisp

Change the

display orientation

Frequency

To change the LED scan rate frequency, s

elect from:

1200Hz 2400Hz 4800Hz 9600Hz

DMX Lost

When DMX is not detected, s

elect from

the output options

Last Data

No Output

Loo

Reset Reset to user saved or default settings. (see User Manual)

. Further Information

Please refer to the Chroma-Q Inspire Terminal Strip manual for more detailed information. A copy of the manual can be found

at the Chroma-Q website – www.chroma-q.com – under Support.

Other manuals for Inspire

Other Chroma Light Fixture manuals

Chroma

Chroma Color One 100X User manual

Chroma

Chroma Inspire Mini User manual

Chroma

Chroma Color Block 2 User manual

Chroma

Chroma Space Force User manual

Chroma

Chroma Inspire User manual

Chroma

Chroma Color Span 2 User manual

Chroma

Chroma Studio Force D Compact User manual

Chroma

Chroma Color One 100 User manual

Chroma

Chroma Studio Force D 48 User manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

Philips

Philips 32614 Series user manual

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification