Christopher Ward C60 Trident Pro COSC User guide
C60 Trident Pro COSC
Limited Edition
Owner’s handbook
1
Your Christopher Ward watch has been designed and
engineered by highly talented craftspeople to ensure
not only accurate and precise timekeeping but also
to bring a real pride of ownership that only luxury
items of the highest quality can ever hope to deliver.
You have made an investment, a good one,
and the aim of this handbook is to help you
make the most of that investment during what
I hope will be a lifetime of ownership.
Christopher Ward
Time on your side...
Introduction
Contents
C60 Trident Pro COSC Limited Edition 2
Technical information 3
How to operate your C60 Trident Pro COSC 4–10
Our watch care programme 11
Keeping in touch 12
2
C60 Trident Pro COSC LE
C60 Trident Pro COSC Limited Edition
Let’s be clear about this; whatever model
you opt for, the C60 Trident Pro is no
ordinary watch.
The summer of 2017 marks the release of this special
Trident. Limited to just 100 pieces, the Pro COSC
Limited Edition features a striking monochrome
look, while our famous Trident second hand
counterbalance has been nished in red. This touch
of colour also appears with an inverted triangle inset
into the fully-tracked bezel at 12 o’clock.
As part of a collection named after the trident of
Poseidon, the wave guilloche design applied to the
COSC Limited Edition’s dial is suitably oceanic, while
its water resistance down to 600m is appropriate
for a watch inspired by the Greek god of the sea.
Inside, a chronometer-certied SW200 movement
keeps the Trident running with a level of precision
rarely seen throughout most Swiss watches – only
6% receive COSC (Contrôle Ociel Suisse des
Chronomètres) status. It’s a level of accuracy that
shouldn’t surprise when you consider the excellence
of materials and engineering involved in this watch.
3
C60 Trident Pro COSC LE
Features
–Swiss made
–Limited edition of 100 pieces
–25 jewel Sellita self-winding chronometer
–38 hour power reserve
–Date calendar
–Central hacking seconds
–Anti-shock system
–Uni-directional zirconia (ZrO2) ceramic bezel
with minute track
–3.4mm anti-reflective flat top sapphire crystal
–Embossed screw-in crown
–Guilloche wave pattern dial
–Super-Luminova®indexes and hands
–Signature Trident counter-balance on
red second hand
Technical information
–Screw-down deep-stamped 3D backplate
–Unique engraved serial number
Technical
Diameter: 43mm
Height: 13.3mm
Weight: 104g
Calibre: Sellita SW200 COSC
Case: 316L stainless steel
Water Resistance: 60 ATM (600 metres)
Vibrations: 28,800 per hour (4 Hz)
Timing tolerance: -4/+6 seconds per day
Lug to lug: 51.5mm
Strap: 22mm
4
How to operate your C60 Trident Pro COSC LE
Setting the time/date
1234
1. Crown screw-in position
2. Manual winding
3. Date setting
4. Time setting
Unscrew and then pull out
5
How to operate your C60 Trident Pro COSC LE
For a superior water resistance your crown is
of the screw-in type. The crown should sit
ush to the case (position
1
) in order to maintain
water resistance.
• First unscrew the crown anti-clockwise from the
case to position
2
for winding in power. Wind in
a clockwise direction to re-power the watch.
Your C60 Trident Pro COSC has a maximum
power reserve of 38 hours when fully wound.
After a period of non-use, we recommend
manually winding the watch to ensure the rotor
weight sustains the amount of power in the
mainspring whilst worn on your wrist – this can
be done via twenty full revolutions of the crown.
• Pull gently into position
3
. For rapid date
correction, turn in a clockwise direction.
• Pull gently into position
4
. This position is used
for handsetting and stopping of the second hand.
For precise time setting it is recommended to
pass beyond the desired minute and to set the
hand backwards.
PLEASE NOTE: Date correction should not be
carried out between 20.00 hr and 02.00 hr
as the watch gearing will already be aligning
itself to change the date. The crown should
always be pushed in after adjustment,
and it is best to do so from position 3 to
avoid advancing beyond the desired date.
You must always ensure the crown is fully
tightened before any use in water.
6
How to operate your C60 Trident Pro COSC LE
The bezel
If using the bezel for a dive and let’s say the recognised
maximum “no-stop time” is 55 minutes, then in
this example (shown right) the time at the surface
immediately before the dive is 10.08am.
However the bezel marker is at the 12.00 hr position.
– Move the bezel marker anti-clockwise so
that it aligns with the 8 minute position.
– You can now read that the 55 minute no
decompression limit will occur at 3 minutes
past the next hour.
PLEASE NOTE: It is always useful and best practice to
make a note on a dive slate before entering the water
and to carry a set of dive tables should the dive plan
change during the course of a dive. A safety stop for
3 to 5 minutes at 15ft is recommended at the end of
all dives. A safety stop for 3 minutes at 15ft is required
any time you come within 3 pressure groups of a no
decompression limit, and for any dive to a depth of
100ft or deeper.
Bezel marker
No decompression limit
Start of dive
7
No decompression limit
Start of dive
8
How to operate your C60 Trident Pro COSC LE
Straps and bracelets
As you would expect, we place as much
emphasis on the quality of our straps and
bracelets as we do our watches. We only use
the nest leathers for our straps. Similarly, we
only use the nest metals in the construction
of our bracelets, all of which are precision
engineered for durability, eciency and comfort.
The following guidelines explain how easy
it is to use and adjust your Christopher Ward
strap or bracelet.
Using the quick-release pins on
your strap
1. Locate the quick-release pin on your
strap. Pull the pin to the side to detach
your strap.
2. To reattach your strap, align the pins
to the lug holes and click the strap
into position. Repeat for the other side.
9
How to operate your C60 Trident Pro COSC LE
1. Press buttons to release.
2. Pull open the clasp.
3. There are five micro-adjustment positions,
which allows for a maximum extension of
8.4mm. To extend, pull the lever to unlock
and simultaneously pull on the bracelet
into the desired position.
4. To shorten, simply push the bracelet
back into the clasp.
Integrated bracelet with micro-adjustment
Other manuals for C60 Trident Pro COSC
1
This manual suits for next models
1
Table of contents
Other Christopher Ward Watch manuals
Christopher Ward
Christopher Ward C63 SH21 Snow Leopard User guide
Christopher Ward
Christopher Ward C60 Shadow Special Edition User guide
Christopher Ward
Christopher Ward C3 Grand Tourer User guide
Christopher Ward
Christopher Ward Sealander Bronze COSC C63 User guide
Christopher Ward
Christopher Ward C65 Sandhurst Series User guide
Christopher Ward
Christopher Ward Lido User manual
Christopher Ward
Christopher Ward C9 5 DAY AUTOMATIC User guide
Christopher Ward
Christopher Ward C60 Trident Ombre COSC Limited Edition User guide
Christopher Ward
Christopher Ward C60 Trident 316L User guide
Christopher Ward
Christopher Ward C60 Lympstone User guide
Christopher Ward
Christopher Ward C8 UTC Worldtimer User guide
Christopher Ward
Christopher Ward C3 Malvern Mk III User guide
Christopher Ward
Christopher Ward C900 User guide
Christopher Ward
Christopher Ward C60 Trident Bronze Ombre COSC Limited... User guide
Christopher Ward
Christopher Ward C65 Trident GMT User guide
Christopher Ward
Christopher Ward C65 GMT Worldtimer User guide
Christopher Ward
Christopher Ward C7 Rapide Day Date COSC Limited Edition User guide
Christopher Ward
Christopher Ward C7 Rapide ChronographAutomatic User guide
Christopher Ward
Christopher Ward D8 Encore User manual
Christopher Ward
Christopher Ward C65 Dune Bronze COSC User guide
