Chr. Hansen MilkSafe User manual
MilkSafe™ Mini
Incubator
User Manual
2
The information contained herein is presented in good faith and is, to the best of our knowledge and belief, true
and reliable. It is oered solely for your consideration, testing and evaluation, and is subject to change without
prior and further notice unless otherwise required by law or agreed upon in writing. There is no warranty being
extended as to its accuracy, completeness, currentness, noninfringement, merchantability or fitness for a
particular purpose. To the best of our knowledge and belief, the product(s) mentioned herein do(es) not infringe
the intellectual property rights of any third party. The product(s) may be covered by pending or issued patents,
registered or unregistered trademarks, or similar intellectual property rights. All rights reserved.
3
Introduction
Intended use
Materials included
Warranty
Main features
Temperature at incubation
Default time settings
Time adjustment range
Safety precautions
Ambient storage and operating conditions
Power supply
Getting started
Timer setup
Incubating
Maintenance notes
Cleaning of the Incubator
Service and repairs
Contents
4
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
4
Introduction
Intended use
The MilkSafe® Mini Incubator (referred to as “the Incubator”) is used to incubate
MilkSafe® Rapid Tests for antibiotics and aflatoxin residues in milk.
Materials included
Mini Incubator
Power adaptor
Car Charger 12/24V
Warranty
The MilkSafe® Mini Incubator is covered by a warranty for one year against
defects in materials and workmanship. This period begins from the date of first
delivery, and within this period incubators will be repaired or replaced as decided
by Chr. Hansen A/S.
The warranty does not cover defects caused by excessive wear and tear or
damage due to shipping, accident, abuse, misuse, problems with electrical
power, or usage not in accordance with product instructions, if other than
original spare parts supplied by the manufacturer have been used or if repairs or
alterations have been performed by anyone else than the manufacturer or agents
approved by the manufacturer. The warranty does not cover removable parts or
consumables.
Main features
Temperature at incubation
40 ± 2°C fixed (104 ± 4°F).
Default time settings
T1: 5 minutes
T2: 0 minutes
5
Time adjustment range
T1: 0 – 5 minutes
T2: 0 – 15 minutes
Safety precautions
Ambient storage and operating conditions
Temperature range: 10 to 30°C / 50 to 86°F.
Power supply
Input power DC 12V / 2A
Power adaptor 110-240V 50/60Hz
Maximum power 20 W
Average power 5 W
Getting started
Connect the power supply to the Incubator and turn it on, on the back of the
Incubator.
After a successful start-up, a beep will sound and the Chr. Hansen logo will
appear on the screen.
The display will now show the current temperature of the Incubator and
automatically rise to 40 ± 2°C.
When the preset value is reached, the Incubator is ready to use.
Timer setup
Press the Set button to view and adjust the timer T1 and T2.
To adjust the time for T1 press Start until you reach the desired time.
Press Set and repeat for T2 if relevant.
Press Set to go to Exit, and press Start to exit.
Note: The selected value for timer T1 and T2 will automatically be saved and
will remain at the following start-up.
1
2
3
4
1
2
3
6
Incubating
Press Start to begin incubation. The first count down will begin. Upon
completing the Incubator will beep.
If relevant, begin the second count down by pressing Start again. Upon
completion the incubator will beep, press Start once again to stop the timer.
If you want to incubate again without changing the time of T1 and T2 press
Start, otherwise repeat Timer Setup.
2
3
Maintenance notes
Cleaning of the Incubator
It is recommended to clean the Incubator housing on a regular basis. If you use
the Incubator in a working area that is subject to dust or contamination, you
should clean the Incubator more often. Use a dry cloth to clean the Incubator. If
the contamination is persistent, you can also rub the surface of the Incubator with
a cloth that has been moisturized with pure alcohol (isopropanol or ethanol). Do
not use aggressive cleaning agents such as acetone.
Service and repairs
For all service or repair needed, please contact your supplier for assistance.
Attempts to open or repair the Incubator by any non-authorized personnel will
void the warranty.
1
7
Experts for the dairy industry
Chr. Hansen believes in improving the quality of food and health. We believe the
best results are achieved when working closely with you.
Our experienced application and industry specialists provide you with the
knowledge, inspiration, support, and customized solutions you need to be
successful.
Contact your local Chr. Hansen representative to learn more about how we can
work together to find the perfect solution for you.
info@chr-hansen.com
www.chr-hansen.com
+45 74 74 74 74
Version 1
Other manuals for MilkSafe
3
Table of contents
